Re: [PATCH v5 01/10] dt-bindings: media: Add amlogic,c3-mipi-csi2.yaml

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 27/12/2024 08:09, Keke Li via B4 Relay wrote:
> From: Keke Li <keke.li@amlogic.com>
> 
> c3-mipi-csi2 is used to receive mipi data from image sensor.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Keke Li <keke.li@amlogic.com>
> ---
>  .../bindings/media/amlogic,c3-mipi-csi2.yaml       | 131 +++++++++++++++++++++
>  MAINTAINERS                                        |   6 +
>  2 files changed, 137 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/media/amlogic,c3-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/amlogic,c3-mipi-csi2.yaml
> new file mode 100644
> index 000000000000..76b68d1e7316
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/amlogic,c3-mipi-csi2.yaml
> @@ -0,0 +1,131 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/amlogic,c3-mipi-csi2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic C3 MIPI CSI-2 receiver
> +
> +maintainers:
> +  - Keke Li <keke.li@amlogic.com>
> +
> +description:
> +  MIPI CSI-2 receiver contains CSI-2 RX PHY and host controller.
> +  It receives the MIPI data from the image sensor and sends MIPI data
> +  to MIPI adapter.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - amlogic,c3-mipi-csi2
> +
> +  reg:
> +    maxItems: 3
> +
> +  reg-names:
> +    items:
> +      - const: aphy
> +      - const: dphy
> +      - const: host
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 2
> +
> +  clock-names:
> +    items:
> +      - const: vapb
> +      - const: phy0
> +
> +  assigned-clocks: true
> +
> +  assigned-clock-rates: true

NAK

Adding new properties *INVALIDATES REVIEW*. Otherwise you can sneak
whatever crap past reviewers.

Drop all new properties and drop my review tag.

Best regards,
Krzysztof