Re: [PATCH v1 2/2] media: i2c: change lt6911uxe irq_gpio name to "hpd"

["Yan, Dongcheng" <dongcheng.yan@linux.intel.com>]

Hi hans,

On 4/11/2025 4:34 PM, Hans de Goede wrote:
> Hi,
> 
> On 11-Apr-25 10:23 AM, Dongcheng Yan wrote:
>> lt6911uxe is used in IPU6 / x86 platform, worked with an out-of-tree
>> int3472 patch and upstream intel/ipu6 before.
>> The upstream int3472 driver uses "hpd" instead of "readystat" now.
>> this patch updates the irq_gpio name to "hpd" accordingly, so that
>> mere users can now use the upstream version directly without relying
>> on out-of-tree int3472 pin support.
>>
>> The new name "hpd" (Hotplug Detect) aligns with common naming
>> conventions used in other drivers(like adv7604) and documentation.
>>
>> Fixes: e49563c3be09d4 ("media: i2c: add lt6911uxe hdmi bridge driver")
>> Cc: stable@vger.kernel.org
>> Signed-off-by: Dongcheng Yan <dongcheng.yan@intel.com>
> 
> The commit message needs an extra sentence to explain that this change
> is ok to make since at the moment this driver is only used on ACPI
> platforms which will use the new "hpd" name and there are no devicetree
> bindings for this driver.
> 
Thanks for your great advice. I'll update commit message next patch.

Best Regard,
Dongcheng> Regards,
> 
> Hans
> 
> 
> 
>> ---
>>  drivers/media/i2c/lt6911uxe.c | 4 ++--
>>  1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/media/i2c/lt6911uxe.c b/drivers/media/i2c/lt6911uxe.c
>> index c5b40bb58a37..24857d683fcf 100644
>> --- a/drivers/media/i2c/lt6911uxe.c
>> +++ b/drivers/media/i2c/lt6911uxe.c
>> @@ -605,10 +605,10 @@ static int lt6911uxe_probe(struct i2c_client *client)
>>  		return dev_err_probe(dev, PTR_ERR(lt6911uxe->reset_gpio),
>>  				     "failed to get reset gpio\n");
>>  
>> -	lt6911uxe->irq_gpio = devm_gpiod_get(dev, "readystat", GPIOD_IN);
>> +	lt6911uxe->irq_gpio = devm_gpiod_get(dev, "hpd", GPIOD_IN);
>>  	if (IS_ERR(lt6911uxe->irq_gpio))
>>  		return dev_err_probe(dev, PTR_ERR(lt6911uxe->irq_gpio),
>> -				     "failed to get ready_stat gpio\n");
>> +				     "failed to get hpd gpio\n");
>>  
>>  	ret = lt6911uxe_fwnode_parse(lt6911uxe, dev);
>>  	if (ret)
>