From: Tejun Heo <tj@kernel.org>
To: torvalds@linux-foundation.org, mingo@elte.hu,
linux-kernel@vger.kernel.org, jeff@garzik.org,
akpm@linux-foundation.org, rusty@rustcorp.com.au,
cl@linux-foundation.org, dhowells@redhat.com,
arjan@linux.intel.com, oleg@redhat.com, axboe@kernel.dk,
fweisbec@gmail.com, dwalker@codeaurora.org,
stefanr@s5r6.in-berlin.de, florian@mickler.org,
andi@firstfloor.org, mst@redhat.com, randy.dunlap@oracle.com
Cc: Tejun Heo <tj@kernel.org>, Andy Walls <awalls@md.metrocast.net>,
ivtv-devel@ivtvdriver.org, linux-media@vger.kernel.org
Subject: [PATCH 02/35] ivtv: use kthread_worker instead of workqueue
Date: Mon, 28 Jun 2010 23:03:50 +0200 [thread overview]
Message-ID: <1277759063-24607-3-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1277759063-24607-1-git-send-email-tj@kernel.org>
Upcoming workqueue updates will no longer guarantee fixed workqueue to
worker kthread association, so giving RT priority to the irq worker
won't work. Use kthread_worker which guarantees specific kthread
association instead. This also makes setting the priority cleaner.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: ivtv-devel@ivtvdriver.org
Cc: linux-media@vger.kernel.org
---
drivers/media/video/ivtv/ivtv-driver.c | 26 ++++++++++++++++----------
drivers/media/video/ivtv/ivtv-driver.h | 8 ++++----
drivers/media/video/ivtv/ivtv-irq.c | 15 +++------------
drivers/media/video/ivtv/ivtv-irq.h | 2 +-
4 files changed, 24 insertions(+), 27 deletions(-)
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index 1b79475..49e0b1c 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -695,6 +695,8 @@ done:
*/
static int __devinit ivtv_init_struct1(struct ivtv *itv)
{
+ struct sched_param param = { .sched_priority = 99 };
+
itv->base_addr = pci_resource_start(itv->pdev, 0);
itv->enc_mbox.max_mbox = 2; /* the encoder has 3 mailboxes (0-2) */
itv->dec_mbox.max_mbox = 1; /* the decoder has 2 mailboxes (0-1) */
@@ -706,13 +708,17 @@ static int __devinit ivtv_init_struct1(struct ivtv *itv)
spin_lock_init(&itv->lock);
spin_lock_init(&itv->dma_reg_lock);
- itv->irq_work_queues = create_singlethread_workqueue(itv->v4l2_dev.name);
- if (itv->irq_work_queues == NULL) {
- IVTV_ERR("Could not create ivtv workqueue\n");
+ init_kthread_worker(&itv->irq_worker);
+ itv->irq_worker_task = kthread_run(kthread_worker_fn, &itv->irq_worker,
+ itv->v4l2_dev.name);
+ if (IS_ERR(itv->irq_worker_task)) {
+ IVTV_ERR("Could not create ivtv task\n");
return -1;
}
+ /* must use the FIFO scheduler as it is realtime sensitive */
+ sched_setscheduler(itv->irq_worker_task, SCHED_FIFO, ¶m);
- INIT_WORK(&itv->irq_work_queue, ivtv_irq_work_handler);
+ init_kthread_work(&itv->irq_work, ivtv_irq_work_handler);
/* start counting open_id at 1 */
itv->open_id = 1;
@@ -996,7 +1002,7 @@ static int __devinit ivtv_probe(struct pci_dev *pdev,
/* PCI Device Setup */
retval = ivtv_setup_pci(itv, pdev, pci_id);
if (retval == -EIO)
- goto free_workqueue;
+ goto free_worker;
if (retval == -ENXIO)
goto free_mem;
@@ -1208,8 +1214,8 @@ free_mem:
release_mem_region(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
if (itv->has_cx23415)
release_mem_region(itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE);
-free_workqueue:
- destroy_workqueue(itv->irq_work_queues);
+free_worker:
+ kthread_stop(itv->irq_worker_task);
err:
if (retval == 0)
retval = -ENODEV;
@@ -1353,9 +1359,9 @@ static void ivtv_remove(struct pci_dev *pdev)
ivtv_set_irq_mask(itv, 0xffffffff);
del_timer_sync(&itv->dma_timer);
- /* Stop all Work Queues */
- flush_workqueue(itv->irq_work_queues);
- destroy_workqueue(itv->irq_work_queues);
+ /* Kill irq worker */
+ flush_kthread_worker(&itv->irq_worker);
+ kthread_stop(itv->irq_worker_task);
ivtv_streams_cleanup(itv, 1);
ivtv_udma_free(itv);
diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h
index 5b45fd2..51f7f2a 100644
--- a/drivers/media/video/ivtv/ivtv-driver.h
+++ b/drivers/media/video/ivtv/ivtv-driver.h
@@ -51,7 +51,7 @@
#include <linux/unistd.h>
#include <linux/pagemap.h>
#include <linux/scatterlist.h>
-#include <linux/workqueue.h>
+#include <linux/kthread.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <asm/uaccess.h>
@@ -257,7 +257,6 @@ struct ivtv_mailbox_data {
#define IVTV_F_I_DEC_PAUSED 20 /* the decoder is paused */
#define IVTV_F_I_INITED 21 /* set after first open */
#define IVTV_F_I_FAILED 22 /* set if first open failed */
-#define IVTV_F_I_WORK_INITED 23 /* worker thread was initialized */
/* Event notifications */
#define IVTV_F_I_EV_DEC_STOPPED 28 /* decoder stopped event */
@@ -663,8 +662,9 @@ struct ivtv {
/* Interrupts & DMA */
u32 irqmask; /* active interrupts */
u32 irq_rr_idx; /* round-robin stream index */
- struct workqueue_struct *irq_work_queues; /* workqueue for PIO/YUV/VBI actions */
- struct work_struct irq_work_queue; /* work entry */
+ struct kthread_worker irq_worker; /* kthread worker for PIO/YUV/VBI actions */
+ struct task_struct *irq_worker_task; /* task for irq_worker */
+ struct kthread_work irq_work; /* kthread work entry */
spinlock_t dma_reg_lock; /* lock access to DMA engine registers */
int cur_dma_stream; /* index of current stream doing DMA (-1 if none) */
int cur_pio_stream; /* index of current stream doing PIO (-1 if none) */
diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c
index fea1ec3..9b4faf0 100644
--- a/drivers/media/video/ivtv/ivtv-irq.c
+++ b/drivers/media/video/ivtv/ivtv-irq.c
@@ -71,19 +71,10 @@ static void ivtv_pio_work_handler(struct ivtv *itv)
write_reg(IVTV_IRQ_ENC_PIO_COMPLETE, 0x44);
}
-void ivtv_irq_work_handler(struct work_struct *work)
+void ivtv_irq_work_handler(struct kthread_work *work)
{
- struct ivtv *itv = container_of(work, struct ivtv, irq_work_queue);
+ struct ivtv *itv = container_of(work, struct ivtv, irq_work);
- DEFINE_WAIT(wait);
-
- if (test_and_clear_bit(IVTV_F_I_WORK_INITED, &itv->i_flags)) {
- struct sched_param param = { .sched_priority = 99 };
-
- /* This thread must use the FIFO scheduler as it
- is realtime sensitive. */
- sched_setscheduler(current, SCHED_FIFO, ¶m);
- }
if (test_and_clear_bit(IVTV_F_I_WORK_HANDLER_PIO, &itv->i_flags))
ivtv_pio_work_handler(itv);
@@ -975,7 +966,7 @@ irqreturn_t ivtv_irq_handler(int irq, void *dev_id)
}
if (test_and_clear_bit(IVTV_F_I_HAVE_WORK, &itv->i_flags)) {
- queue_work(itv->irq_work_queues, &itv->irq_work_queue);
+ queue_kthread_work(&itv->irq_worker, &itv->irq_work);
}
spin_unlock(&itv->dma_reg_lock);
diff --git a/drivers/media/video/ivtv/ivtv-irq.h b/drivers/media/video/ivtv/ivtv-irq.h
index f879a58..1e84433 100644
--- a/drivers/media/video/ivtv/ivtv-irq.h
+++ b/drivers/media/video/ivtv/ivtv-irq.h
@@ -46,7 +46,7 @@
irqreturn_t ivtv_irq_handler(int irq, void *dev_id);
-void ivtv_irq_work_handler(struct work_struct *work);
+void ivtv_irq_work_handler(struct kthread_work *work);
void ivtv_dma_stream_dec_prepare(struct ivtv_stream *s, u32 offset, int lock);
void ivtv_unfinished_dma(unsigned long arg);
--
1.6.4.2
next parent reply other threads:[~2010-06-28 21:08 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1277759063-24607-1-git-send-email-tj@kernel.org>
2010-06-28 21:03 ` Tejun Heo [this message]
2010-07-05 17:11 ` [PATCH 02/35] ivtv: use kthread_worker instead of workqueue Andy Walls
2010-07-06 7:01 ` Tejun Heo
2010-07-09 13:15 ` Andy Walls
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1277759063-24607-3-git-send-email-tj@kernel.org \
--to=tj@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=andi@firstfloor.org \
--cc=arjan@linux.intel.com \
--cc=awalls@md.metrocast.net \
--cc=axboe@kernel.dk \
--cc=cl@linux-foundation.org \
--cc=dhowells@redhat.com \
--cc=dwalker@codeaurora.org \
--cc=florian@mickler.org \
--cc=fweisbec@gmail.com \
--cc=ivtv-devel@ivtvdriver.org \
--cc=jeff@garzik.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=mst@redhat.com \
--cc=oleg@redhat.com \
--cc=randy.dunlap@oracle.com \
--cc=rusty@rustcorp.com.au \
--cc=stefanr@s5r6.in-berlin.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox