* Re: Bug#639161: linux-image-3.0.0-1-686-pae: Upgrade 2.6.39 -> 3.0.0 breaks playback on DiBcom 7000PC
2011-08-24 22:50 ` Bug#639161: linux-image-3.0.0-1-686-pae: Upgrade 2.6.39 -> 3.0.0 breaks playback on DiBcom 7000PC Ben Hutchings
@ 2011-08-25 8:34 ` Patrick Boettcher
0 siblings, 0 replies; 2+ messages in thread
From: Patrick Boettcher @ 2011-08-25 8:34 UTC (permalink / raw)
To: Ben Hutchings; +Cc: 639161@bugs.debian.org, Soeren D. Schulze, linux-media
Hi,
Afaik, this is fixed with those commits:
[media] dib0700: correct error message for_v3.0
[media] dib0700: protect the dib0700 buffer access
[media] DiBcom: protect the I2C bufer access
from
http://git.linuxtv.org/pb/media_tree.git/shortlog/refs/heads/for_v3.0
A pull request has been sent to the media-maintainer, but it seems he is
busy.
--
Patrick.
On Thursday 25 August 2011 00:50:37 Ben Hutchings wrote:
Patrick,
Please could you take a look at the following bug report on Linux 3.0 as
packaged in Debian.
Ben.
On Wed, 2011-08-24 at 18:59 +0200, Soeren D. Schulze wrote:
> Package: linux-2.6
> Version: 3.0.0-1
> Severity: normal
>
> I usually use tzap/mplayer for TV playback.
>
> After the upgrade to Linux 3.0.0, tzap command line output still looks
> fine, but mplayer does not seem to receive any data (its cache does not
> fill up).
>
> syslog/dmesg output looks the same as in 2.6.39. On the first try to
> tune, dmesg receives:
>
> dib0700: tx buffer length is larger than 4. Not supported.
> (for which I find various non-Debian bug reports)
>
> But that does not seem to be the issue, because the same message appears
> in 2.6.39, where everything is fine.
> So I do not really have an idea what the problem is, but I certainly
> know that it's a regression, because simply booting Linux 2.6.39 rather
> than 3.0.0 on the same system avoids the problem.
>
> -- Package-specific info:
> ** Version:
> Linux version 3.0.0-1-686-pae (Debian 3.0.0-1) (ben@decadent.org.uk)
> (gcc version 4.5.3 (Debian 4.5.3-3) ) #1 SMP Sun Jul 24 14:27:32 UTC 2011
>
> ** Command line:
> BOOT_IMAGE=/vmlinuz-3.0.0-1-686-pae
> root=UUID=3aa0a731-df46-486e-9c1e-258723e14f8f ro
>
> ** Not tainted
>
> ** Kernel log:
> [ 11.031446] saa7134: card=172 -> RoverMedia TV Link Pro FM
> 19d1:0138
> [ 11.031580] saa7134: card=173 -> Zolid Hybrid TV Tuner PCI
> 1131:2004
> [ 11.031713] saa7134: card=174 -> Asus Europa Hybrid OEM
> 1043:4847
> [ 11.031847] saa7134: card=175 -> Leadtek Winfast DTV1000S
> 107d:6655
> [ 11.031982] saa7134: card=176 -> Beholder BeholdTV 505 RDS
> 0000:5051
> [ 11.032126] saa7134: card=177 -> Hawell HW-404M7
>
> [ 11.032217] saa7134: card=178 -> Beholder BeholdTV H7
> 5ace:7190
> [ 11.032351] saa7134: card=179 -> Beholder BeholdTV A7
> 5ace:7090
> [ 11.032485] saa7134: card=180 -> Avermedia PCI M733A
> 1461:4155 1461:4255
> [ 11.032656] saa7134: card=181 -> TechoTrend TT-budget T-3000
> 13c2:2804
> [ 11.032789] saa7134: card=182 -> Kworld PCI SBTVD/ISDB-T Full-Seg
> Hybrid 17de:b136
> [ 11.032923] saa7134: card=183 -> Compro VideoMate Vista M1F
> 185b:c900
> [ 11.033057] saa7134: card=184 -> Encore ENLTV-FM 3
> 1a7f:2108
> [ 11.033192] saa7134: card=185 -> MagicPro ProHDTV Pro2
> DMB-TH/Hybrid 17de:d136
> [ 11.033326] saa7134: card=186 -> Beholder BeholdTV 501
> 5ace:5010
> [ 11.033460] saa7134: card=187 -> Beholder BeholdTV 503 FM
> 5ace:5030
> [ 11.033596] saa7134[0]: subsystem: 1131:0000, board: UNKNOWN/GENERIC
> [card=0,autodetected]
> [ 11.075242] IR NEC protocol handler initialized
> [ 11.265597] saa7134[0]: board init: gpio is 10020
> [ 11.368582] saa7134[0]: Huh, no eeprom present (err=-5)?
> [ 11.381924] saa7134[0]: registered device video0 [v4l2]
> [ 11.382055] saa7134[0]: registered device vbi0
> [ 11.417515] IR RC5(x) protocol handler initialized
> [ 11.607051] cfg80211: Calling CRDA to update world regulatory domain
> [ 11.995773] IR RC6 protocol handler initialized
> [ 12.191500] IR JVC protocol handler initialized
> [ 12.263839] dib0700: loaded with support for 20 different device-types
> [ 12.264209] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
> [ 12.265499] dvb-usb: will pass the complete MPEG2 transport stream to
> the software demuxer.
> [ 12.266158] DVB: registering new adapter (Hauppauge Nova-T Stick)
> [ 12.517093] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
> [ 12.609760] IR Sony protocol handler initialized
> [ 12.790869] DiB0070: successfully identified
> [ 12.907896] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
> [ 12.907988] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] ->
> GSI 22 (level, low) -> IRQ 22
> [ 12.908316] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
> [ 12.932675] saa7134 ALSA driver for DMA sound loaded
> [ 12.932807] saa7134[0]/alsa: saa7134[0] at 0xfdffc000 irq 16
> registered as card -1
> [ 12.948789] lirc_dev: IR Remote Control driver registered, major 249
> [ 12.952109] IR LIRC bridge handler initialized
> [ 13.380033] Registered IR keymap rc-dib0700-rc5
> [ 13.380514] input: IR-receiver inside an USB DVB receiver as
> /devices/pci0000:00/0000:00:10.4/usb1/1-1/1-1.3/rc/rc0/input6
> [ 13.380749] rc0: IR-receiver inside an USB DVB receiver as
> /devices/pci0000:00/0000:00:10.4/usb1/1-1/1-1.3/rc/rc0
> [ 13.382312] dvb-usb: schedule remote query interval to 50 msecs.
> [ 13.382385] dvb-usb: Hauppauge Nova-T Stick successfully initialized
> and connected.
> [ 13.382931] dib0700: rc submit urb failed
> [ 13.382935]
> [ 13.383099] usbcore: registered new interface driver dvb_usb_dib0700
> [ 13.530512] ENS1371 0000:00:14.0: PCI INT A -> GSI 17 (level, low) ->
> IRQ 17
> [ 14.848088] usb 1-1.1: ath9k_htc: Transferred FW: htc_9271.fw, size:
> 51272
> [ 15.061785] ath9k_htc 1-1.1:1.0: ath9k_htc: HTC initialized with 33
> credits
> [ 15.277766] ath9k_htc 1-1.1:1.0: ath9k_htc: FW Version: 1.3
> [ 15.277836] ath: EEPROM regdomain: 0x809c
> [ 15.277841] ath: EEPROM indicates we should expect a country code
> [ 15.277848] ath: doing EEPROM country->regdmn map search
> [ 15.277853] ath: country maps to regdmn code: 0x52
> [ 15.277859] ath: Country alpha2 being used: CN
> [ 15.277864] ath: Regpair used: 0x52
> [ 15.585402] ieee80211 phy0: Atheros AR9271 Rev:1
> [ 15.589401] Registered led device: ath9k_htc-phy0
> [ 15.589415] usb 1-1.1: ath9k_htc: USB layer initialized
> [ 15.590190] usbcore: registered new interface driver ath9k_htc
> [ 18.808140] Adding 10787640k swap on /dev/sda4. Priority:-1
> extents:1 across:10787640k
> [ 19.502130] EXT3-fs (sda1): using internal journal
> [ 22.357921] EXT3-fs: barriers not enabled
> [ 22.358315] kjournald starting. Commit interval 5 seconds
> [ 22.358692] EXT3-fs (sda3): using internal journal
> [ 22.358751] EXT3-fs (sda3): mounted filesystem with ordered data mode
> [ 22.395040] EXT3-fs: barriers not enabled
> [ 22.401833] kjournald starting. Commit interval 5 seconds
> [ 22.402651] EXT3-fs (sdb3): using internal journal
> [ 22.402712] EXT3-fs (sdb3): mounted filesystem with ordered data mode
> [ 25.514875] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [ 26.986709] wlan0: authenticate with 00:12:80:61:35:51 (try 1)
> [ 26.997149] wlan0: authenticated
> [ 26.997194] wlan0: associate with 00:12:80:61:35:51 (try 1)
> [ 26.999084] wlan0: RX AssocResp from 00:12:80:61:35:51 (capab=0x421
> status=0 aid=242)
> [ 26.999092] wlan0: associated
> [ 27.003033] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> [ 33.524144] via-velocity 0000:00:0e.0: BAR 0: set to [io
> 0xf800-0xf8ff] (PCI address [0xf800-0xf8ff])
> [ 33.524235] via-velocity 0000:00:0e.0: BAR 1: set to [mem
> 0xfdffe000-0xfdffe0ff] (PCI address [0xfdffe000-0xfdffe0ff])
> [ 33.538795] Velocity is AUTO mode
> [ 36.714998] eth1: Link auto-negotiation speed 1000M bps full duplex
> [ 37.286191] fuse init (API version 7.16)
> [ 43.648030] eth1: no IPv6 routers present
> [ 51.853616] tun: Universal TUN/TAP device driver, 1.6
> [ 51.853684] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
> [ 52.109378] lp: driver loaded but no devices found
> [ 52.920446] ppdev: user-space parallel port driver
> [ 54.753473] [drm] Initialized drm 1.1.0 20060810
> [ 54.806037] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
> [ 54.807929] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> [ 54.807943] [drm] No driver support for vblank timestamp query.
> [ 54.807953] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on
> minor 0
> [ 54.887708] agpgart-via 0000:00:00.0: AGP 3.5 bridge
> [ 54.887762] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x
mode
> [ 54.887870] pci 0000:01:00.0: putting AGP V3 device into 8x mode
> [ 55.014046] saa7134[0]/irq[10,-61247]: r=0x20 s=0x00 PE
> [ 55.014057] saa7134[0]/irq: looping -- clearing PE (parity error!)
> enable bit
> [ 62.016040] tap0: no IPv6 routers present
>
> ** Model information
> not available
>
> ** Loaded modules:
> Module Size Used by
> acpi_cpufreq 12865 0
> mperf 12421 1 acpi_cpufreq
> cpufreq_userspace 12520 0
> cpufreq_stats 12758 0
> cpufreq_powersave 12422 0
> cpufreq_conservative 12987 0
> via 34755 2
> drm 129806 3 via
> parport_pc 22059 0
> ppdev 12651 0
> lp 12894 0
> parport 27241 3 parport_pc,ppdev,lp
> tun 17889 2
> binfmt_misc 12880 1
> fuse 56331 1
> arc4 12418 2
> ath9k_htc 42912 0
> mac80211 165768 1 ath9k_htc
> rc_dib0700_rc5 12364 0
> ir_lirc_codec 12627 0
> lirc_dev 12803 1 ir_lirc_codec
> saa7134_alsa 17407 0
> snd_ens1371 18687 1
> snd_via82xx 22658 0
> gameport 13404 2 snd_ens1371,snd_via82xx
> snd_ac97_codec 84197 2 snd_ens1371,snd_via82xx
> ir_sony_decoder 12403 0
> ath9k_common 12610 1 ath9k_htc
> snd_mpu401_uart 13299 1 snd_via82xx
> ac97_bus 12462 1 snd_ac97_codec
> snd_seq_midi 12744 0
> snd_pcm_oss 36377 0
> snd_mixer_oss 17713 1 snd_pcm_oss
> dvb_usb_dib0700 68669 0
> snd_pcm 53315 5
> saa7134_alsa,snd_ens1371,snd_via82xx,snd_ac97_codec,snd_pcm_oss
> ir_jvc_decoder 12435 0
> ath9k_hw 250420 2 ath9k_htc,ath9k_common
> snd_rawmidi 22621 3 snd_ens1371,snd_mpu401_uart,snd_seq_midi
> ir_rc6_decoder 12426 0
> dib7000p 26533 2 dvb_usb_dib0700
> dib0090 21477 1 dvb_usb_dib0700
> dib7000m 17340 1 dvb_usb_dib0700
> dib0070 12767 2 dvb_usb_dib0700
> ath 17181 2 ath9k_htc,ath9k_hw
> dvb_usb 17949 1 dvb_usb_dib0700
> dib8000 26215 1 dvb_usb_dib0700
> dvb_core 68157 3 dib7000p,dvb_usb,dib8000
> cfg80211 112970 3 ath9k_htc,mac80211,ath
> snd_seq_midi_event 13124 1 snd_seq_midi
> ir_rc5_decoder 12401 0
> rfkill 18522 1 cfg80211
> dib3000mc 17436 1 dvb_usb_dib0700
> dibx000_common 13018 5
> dvb_usb_dib0700,dib7000p,dib7000m,dib8000,dib3000mc
> snd_seq 39539 2 snd_seq_midi,snd_seq_midi_event
> ir_nec_decoder 12435 0
> saa7134 133424 1 saa7134_alsa
> rc_core 17944 11
>
rc_dib0700_rc5,ir_lirc_codec,ir_sony_decoder,dvb_usb_dib0700,ir_jvc_decoder,ir_rc6_decoder,dvb_usb,ir_rc5_decoder,ir_nec_decoder,saa7134
> videobuf_dma_sg 13047 2 saa7134_alsa,saa7134
> videobuf_core 17516 2 saa7134,videobuf_dma_sg
> v4l2_common 13054 1 saa7134
> snd_timer 22027 2 snd_pcm,snd_seq
> snd_seq_device 12985 3 snd_seq_midi,snd_rawmidi,snd_seq
> videodev 61530 2 saa7134,v4l2_common
> media 13692 1 videodev
> tveeprom 16473 1 saa7134
> snd 38562 14
>
saa7134_alsa,snd_ens1371,snd_via82xx,snd_ac97_codec,snd_mpu401_uart,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
> evdev 12995 11
> i2c_viapro 12451 0
> shpchp 26759 0
> pci_hotplug 26736 1 shpchp
> i2c_core 19141 15
>
drm,dvb_usb_dib0700,dib7000p,dib0090,dib7000m,dib0070,dvb_usb,dib8000,dib3000mc,dibx000_common,saa7134,v4l2_common,videodev,tveeprom,i2c_viapro
> soundcore 12992 1 snd
> snd_page_alloc 12899 2 snd_via82xx,snd_pcm
> pcspkr 12515 0
> button 12810 0
> processor 27382 2 acpi_cpufreq
> ext3 99597 3
> jbd 42027 1 ext3
> mbcache 12898 1 ext3
> usbhid 31584 0
> hid 60152 1 usbhid
> sg 21564 0
> sr_mod 17478 0
> cdrom 34689 1 sr_mod
> sd_mod 35493 6
> crc_t10dif 12332 1 sd_mod
> ata_generic 12439 0
> pata_via 12733 4
> sata_via 12760 0
> libata 133339 3 ata_generic,pata_via,sata_via
> uhci_hcd 22275 0
> ehci_hcd 35401 0
> scsi_mod 135178 4 sg,sr_mod,sd_mod,libata
> usbcore 104234 7
> ath9k_htc,dvb_usb_dib0700,dvb_usb,usbhid,uhci_hcd,ehci_hcd
> firewire_ohci 26764 0
> via_velocity 27240 0
> crc_ccitt 12331 1 via_velocity
> firewire_core 42778 1 firewire_ohci
> crc_itu_t 12331 1 firewire_core
> thermal 13138 0
> fan 12594 0
> thermal_sys 17677 3 processor,thermal,fan
>
> ** Network interface configuration:
>
> -- System Information:
> Debian Release: wheezy/sid
> APT prefers testing
> APT policy: (501, 'testing')
> Architecture: i386 (i686)
>
> Kernel: Linux 3.0.0-1-686-pae (SMP w/1 CPU core)
> Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
> Shell: /bin/sh linked to /bin/bash
>
> Versions of packages linux-image-3.0.0-1-686-pae depends on:
> ii debconf [debconf-2.0] 1.5.40 Debian configuration
> management sy
> ii initramfs-tools [linux-initra 0.99 tools for generating an
> initramfs
> ii linux-base 3.3 Linux image base package
> ii module-init-tools 3.16-1 tools for managing Linux
> kernel mo
>
> Versions of packages linux-image-3.0.0-1-686-pae recommends:
> ii firmware-linux-free 3 Binary firmware for various
> driver
> ii libc6-i686 2.13-16 Embedded GNU C Library:
> Shared lib
>
> Versions of packages linux-image-3.0.0-1-686-pae suggests:
> ii grub-pc 1.99-11 GRand Unified Bootloader,
> version
> pn linux-doc-3.0.0 <none> (no description available)
>
> Versions of packages linux-image-3.0.0-1-686-pae is related to:
> pn firmware-bnx2 <none> (no description available)
> pn firmware-bnx2x <none> (no description available)
> pn firmware-ipw2x00 <none> (no description available)
> pn firmware-ivtv <none> (no description available)
> pn firmware-iwlwifi <none> (no description available)
> pn firmware-linux <none> (no description available)
> pn firmware-linux-nonfree <none> (no description available)
> pn firmware-qlogic <none> (no description available)
> pn firmware-ralink <none> (no description available)
> pn xen-hypervisor <none> (no description available)
>
> -- debconf information:
> linux-image-3.0.0-1-686-pae/postinst/ignoring-ramdisk:
> * linux-image-3.0.0-1-686-pae/postinst/missing-firmware-3.0.0-1-686-pae:
>
> linux-image-3.0.0-1-686-pae/prerm/removing-running-kernel-3.0.0-1-686-pae:
> true
>
> linux-image-3.0.0-1-686-pae/postinst/depmod-error-initrd-3.0.0-1-686-pae:
false
>
>
>
CONFIDENTIAL NOTICE: The contents of this message, including any attachments, are confidential and are intended solely for the use of the person or entity to whom the message was addressed. If you are not the intended recipient of this message, please be advised that any dissemination, distribution, or use of the contents of this message is strictly prohibited. If you received this message in error, please notify the sender. Please also permanently delete all copies of the original message and any attached documentation. Thank you.
^ permalink raw reply [flat|nested] 2+ messages in thread