From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: mchehab@redhat.com
Cc: andrew.smirnov@gmail.com, hverkuil@xs4all.nl,
sameo@linux.intel.com, linux-media@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v8 0/9] Driver for Si476x series of chips
Date: Tue, 26 Mar 2013 19:47:17 -0700 [thread overview]
Message-ID: <1364352446-28572-1-git-send-email-andrew.smirnov@gmail.com> (raw)
Driver for Si476x series of chips
This is a eight version of the patchset originaly posted here:
https://lkml.org/lkml/2012/9/13/590
Second version of the patch was posted here:
https://lkml.org/lkml/2012/10/5/598
Third version of the patch was posted here:
https://lkml.org/lkml/2012/10/23/510
Fourth version of the patch was posted here:
https://lkml.org/lkml/2013/2/18/572
Fifth version of the patch was posted here:
https://lkml.org/lkml/2013/2/26/45
Sixth version of the patch was posted here:
https://lkml.org/lkml/2013/2/26/257
Seventh version of the patch was posted here:
https://lkml.org/lkml/2013/2/27/22
To save everyone's time I'll repost the original description of it:
This patchset contains a driver for a Silicon Laboratories 476x series
of radio tuners. The driver itself is implemented as an MFD devices
comprised of three parts:
1. Core device that provides all the other devices with basic
functionality and locking scheme.
2. Radio device that translates between V4L2 subsystem requests into
Core device commands.
3. Codec device that does similar to the earlier described task, but
for ALSA SoC subsystem.
v8 of this driver has following changes:
- checkpatch.pl fixes
Pleas note that patches are not completely warning free, as far as
checkpatch.pl is concerned, because I skipped all the places where
80-character compliance can be acheived only by means of weird
indentation.
Andrey Smirnov (9):
mfd: Add commands abstraction layer for SI476X MFD
mfd: Add the main bulk of core driver for SI476x code
mfd: Add chip properties handling code for SI476X MFD
mfd: Add header files and Kbuild plumbing for SI476x MFD core
v4l2: Fix the type of V4L2_CID_TUNE_PREEMPHASIS in the documentation
v4l2: Add standard controls for FM receivers
v4l2: Add documentation for the FM RX controls
v4l2: Add private controls base for SI476X
v4l2: Add a V4L2 driver for SI476X MFD
Documentation/DocBook/media/v4l/compat.xml | 3 +
Documentation/DocBook/media/v4l/controls.xml | 74 +-
.../DocBook/media/v4l/vidioc-g-ext-ctrls.xml | 9 +
Documentation/video4linux/si476x.txt | 187 +++
drivers/media/radio/Kconfig | 17 +
drivers/media/radio/Makefile | 1 +
drivers/media/radio/radio-si476x.c | 1599 ++++++++++++++++++++
drivers/media/v4l2-core/v4l2-ctrls.c | 14 +-
drivers/mfd/Kconfig | 12 +
drivers/mfd/Makefile | 4 +
drivers/mfd/si476x-cmd.c | 1554 +++++++++++++++++++
drivers/mfd/si476x-i2c.c | 886 +++++++++++
drivers/mfd/si476x-prop.c | 242 +++
include/linux/mfd/si476x-core.h | 525 +++++++
include/media/si476x.h | 426 ++++++
include/uapi/linux/v4l2-controls.h | 17 +
16 files changed, 5566 insertions(+), 4 deletions(-)
create mode 100644 Documentation/video4linux/si476x.txt
create mode 100644 drivers/media/radio/radio-si476x.c
create mode 100644 drivers/mfd/si476x-cmd.c
create mode 100644 drivers/mfd/si476x-i2c.c
create mode 100644 drivers/mfd/si476x-prop.c
create mode 100644 include/linux/mfd/si476x-core.h
create mode 100644 include/media/si476x.h
--
1.7.10.4
next reply other threads:[~2013-03-27 2:47 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-27 2:47 Andrey Smirnov [this message]
2013-03-27 2:47 ` [PATCH v8 1/9] mfd: Add commands abstraction layer for SI476X MFD Andrey Smirnov
2013-04-08 10:16 ` Samuel Ortiz
[not found] ` <CAHQ1cqE4aokZA98VfCWwRtkaNPm6dMnegibVz4BHfYW_VrAUBA@mail.gmail.com>
2013-04-08 20:09 ` Samuel Ortiz
[not found] ` <CAHQ1cqGytarQ9bkOiq-MdpRbKiHBTRPJy90Cbg=Sr4J7MWNj+g@mail.gmail.com>
2013-04-09 7:17 ` Samuel Ortiz
2013-03-27 2:47 ` [PATCH v8 2/9] mfd: Add the main bulk of core driver for SI476x code Andrey Smirnov
2013-03-27 2:47 ` [PATCH v8 3/9] mfd: Add chip properties handling code for SI476X MFD Andrey Smirnov
2013-03-27 2:47 ` [PATCH v8 4/9] mfd: Add header files and Kbuild plumbing for SI476x MFD core Andrey Smirnov
2013-03-27 2:47 ` [PATCH v8 5/9] v4l2: Fix the type of V4L2_CID_TUNE_PREEMPHASIS in the documentation Andrey Smirnov
2013-03-27 2:47 ` [PATCH v8 6/9] v4l2: Add standard controls for FM receivers Andrey Smirnov
2013-03-27 2:47 ` [PATCH v8 7/9] v4l2: Add documentation for the FM RX controls Andrey Smirnov
2013-03-27 2:47 ` [PATCH v8 8/9] v4l2: Add private controls base for SI476X Andrey Smirnov
2013-03-27 2:47 ` [PATCH v8 9/9] v4l2: Add a V4L2 driver for SI476X MFD Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364352446-28572-1-git-send-email-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=hverkuil@xs4all.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@redhat.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox