* [GIT PULL FOR 3.10] DiBxxxx: fixes and improvements
@ 2013-04-22 8:12 Patrick Boettcher
2013-04-27 14:28 ` Mauro Carvalho Chehab
0 siblings, 1 reply; 5+ messages in thread
From: Patrick Boettcher @ 2013-04-22 8:12 UTC (permalink / raw)
To: linux-media
Hi Mauro,
These patches contains some fixes and changes for the DiBcom demods and
SIPs.
Please merge for 3.10 if possible.
The following changes since commit 60d509fa6a9c4653a86ad830e4c4b30360b23f0e:
Linux 3.9-rc8 (2013-04-21 14:38:45 -0700)
are available in the git repository at:
git://git.linuxtv.org/pb/media_tree.git/ master
for you to fetch changes up to 7e39d1958b186e5af259b9fde1a006853b4663ab:
[media] dib8000: do not freeze AGCs by default (2013-04-22 10:06:48 +0200)
----------------------------------------------------------------
Olivier Grenie (6):
[media] dib8000: enhancement
[media] dib7000p: enhancement
[media] dib0090: enhancement
[media] dib8096: enhancement
[media] dib7090p: remove the support for the dib7090E
[media] dib7090p: improve the support of the dib7090 and dib7790
Patrick Boettcher (1):
[media] dib8000: do not freeze AGCs by default
drivers/media/dvb-core/dvb-usb-ids.h | 3 +-
drivers/media/dvb-frontends/dib0090.c | 438 ++---
drivers/media/dvb-frontends/dib7000p.c | 17 +-
drivers/media/dvb-frontends/dib7000p.h | 7 +
drivers/media/dvb-frontends/dib8000.c | 2239 +++++++++++++---------
drivers/media/dvb-frontends/dib8000.h | 6 +-
drivers/media/dvb-frontends/dibx000_common.h | 3 +-
drivers/media/usb/dvb-usb/dib0700_devices.c | 465 +++--
8 files changed, 1780 insertions(+), 1398 deletions(-)
regards,
--
Patrick
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [GIT PULL FOR 3.10] DiBxxxx: fixes and improvements 2013-04-22 8:12 [GIT PULL FOR 3.10] DiBxxxx: fixes and improvements Patrick Boettcher @ 2013-04-27 14:28 ` Mauro Carvalho Chehab 2013-04-28 20:28 ` Olivier GRENIE 2013-05-04 4:05 ` Olivier GRENIE 0 siblings, 2 replies; 5+ messages in thread From: Mauro Carvalho Chehab @ 2013-04-27 14:28 UTC (permalink / raw) To: Patrick Boettcher; +Cc: linux-media, Olivier GRENIE, Patrick BOETTCHER Hi Patrick, Em Mon, 22 Apr 2013 10:12:34 +0200 Patrick Boettcher <pboettcher@kernellabs.com> escreveu: > Hi Mauro, > > These patches contains some fixes and changes for the DiBcom demods and > SIPs. > > Please merge for 3.10 if possible. > > > The following changes since commit 60d509fa6a9c4653a86ad830e4c4b30360b23f0e: > > Linux 3.9-rc8 (2013-04-21 14:38:45 -0700) > > are available in the git repository at: > > git://git.linuxtv.org/pb/media_tree.git/ master Hmm... I suspect that there's something wrong with those changes. Testing it with a dib8076 usb stick seems that the code is worse than before, as it is now harder to get a lock here. With the previous code: INFO Scanning frequency #1 725142857 Carrier(0x03) Signal= 67.46% C/N= 0.00% UCB= 0 postBER= 0 Viterbi(0x05) Signal= 67.08% C/N= 0.00% UCB= 0 postBER= 2097151 Viterbi(0x07) Signal= 67.54% C/N= 0.25% UCB= 165 postBER= 0 Sync (0x0f) Signal= 67.06% C/N= 0.23% UCB= 151 postBER= 0 Lock (0x1f) Signal= 67.58% C/N= 0.24% UCB= 160 postBER= 338688 Service #0 (60320) BAND HD channel 57.1.0 Service #1 (60345) BAND 1SEG channel 57.1.1 With the new code: INFO Scanning frequency #1 725142857 (0x00) Signal= 68.80% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.78% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.69% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.82% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.29% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.27% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.28% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.27% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.55% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.50% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.43% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.65% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.75% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.29% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.28% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.25% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.43% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.46% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.43% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.90% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.50% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.28% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.22% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.22% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.43% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.41% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.41% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.96% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.42% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.24% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.22% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.25% C/N= 0.00% UCB= 0 postBER= 0 So, it seems that the changes broke something. Regards, Mauro ^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [GIT PULL FOR 3.10] DiBxxxx: fixes and improvements 2013-04-27 14:28 ` Mauro Carvalho Chehab @ 2013-04-28 20:28 ` Olivier GRENIE 2013-05-04 4:05 ` Olivier GRENIE 1 sibling, 0 replies; 5+ messages in thread From: Olivier GRENIE @ 2013-04-28 20:28 UTC (permalink / raw) To: Mauro Carvalho Chehab, Patrick Boettcher Cc: linux-media@vger.kernel.org, Patrick BOETTCHER Hello Mauro, I will have a look tomorrow and gives a patch. Sorry for this mistake. regards, Olivier ________________________________________ From: Mauro Carvalho Chehab [mchehab@redhat.com] Sent: Saturday, April 27, 2013 4:28 PM To: Patrick Boettcher Cc: linux-media@vger.kernel.org; Olivier GRENIE; Patrick BOETTCHER Subject: Re: [GIT PULL FOR 3.10] DiBxxxx: fixes and improvements Hi Patrick, Em Mon, 22 Apr 2013 10:12:34 +0200 Patrick Boettcher <pboettcher@kernellabs.com> escreveu: > Hi Mauro, > > These patches contains some fixes and changes for the DiBcom demods and > SIPs. > > Please merge for 3.10 if possible. > > > The following changes since commit 60d509fa6a9c4653a86ad830e4c4b30360b23f0e: > > Linux 3.9-rc8 (2013-04-21 14:38:45 -0700) > > are available in the git repository at: > > git://git.linuxtv.org/pb/media_tree.git/ master Hmm... I suspect that there's something wrong with those changes. Testing it with a dib8076 usb stick seems that the code is worse than before, as it is now harder to get a lock here. With the previous code: INFO Scanning frequency #1 725142857 Carrier(0x03) Signal= 67.46% C/N= 0.00% UCB= 0 postBER= 0 Viterbi(0x05) Signal= 67.08% C/N= 0.00% UCB= 0 postBER= 2097151 Viterbi(0x07) Signal= 67.54% C/N= 0.25% UCB= 165 postBER= 0 Sync (0x0f) Signal= 67.06% C/N= 0.23% UCB= 151 postBER= 0 Lock (0x1f) Signal= 67.58% C/N= 0.24% UCB= 160 postBER= 338688 Service #0 (60320) BAND HD channel 57.1.0 Service #1 (60345) BAND 1SEG channel 57.1.1 With the new code: INFO Scanning frequency #1 725142857 (0x00) Signal= 68.80% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.78% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.69% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.82% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.29% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.27% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.28% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.27% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.55% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.50% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.43% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.65% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.75% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.29% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.28% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.25% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.43% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.46% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.43% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.90% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.50% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.28% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.22% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.22% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.43% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.41% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.41% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.96% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.42% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.24% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.22% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.25% C/N= 0.00% UCB= 0 postBER= 0 So, it seems that the changes broke something. Regards, Mauro ^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [GIT PULL FOR 3.10] DiBxxxx: fixes and improvements 2013-04-27 14:28 ` Mauro Carvalho Chehab 2013-04-28 20:28 ` Olivier GRENIE @ 2013-05-04 4:05 ` Olivier GRENIE 2013-06-02 17:03 ` Michael Krufky 1 sibling, 1 reply; 5+ messages in thread From: Olivier GRENIE @ 2013-05-04 4:05 UTC (permalink / raw) To: Mauro Carvalho Chehab Cc: linux-media@vger.kernel.org, Patrick BOETTCHER, Patrick Boettcher [-- Attachment #1: Type: text/plain, Size: 3635 bytes --] Hello Mauro, can you apply the attached patch. This patch correct the proposed patch by Patrick for the dib807x. Sorry to not have seen it before. regards, Olivier ________________________________________ From: Mauro Carvalho Chehab [mchehab@redhat.com] Sent: Saturday, April 27, 2013 4:28 PM To: Patrick Boettcher Cc: linux-media@vger.kernel.org; Olivier GRENIE; Patrick BOETTCHER Subject: Re: [GIT PULL FOR 3.10] DiBxxxx: fixes and improvements Hi Patrick, Em Mon, 22 Apr 2013 10:12:34 +0200 Patrick Boettcher <pboettcher@kernellabs.com> escreveu: > Hi Mauro, > > These patches contains some fixes and changes for the DiBcom demods and > SIPs. > > Please merge for 3.10 if possible. > > > The following changes since commit 60d509fa6a9c4653a86ad830e4c4b30360b23f0e: > > Linux 3.9-rc8 (2013-04-21 14:38:45 -0700) > > are available in the git repository at: > > git://git.linuxtv.org/pb/media_tree.git/ master Hmm... I suspect that there's something wrong with those changes. Testing it with a dib8076 usb stick seems that the code is worse than before, as it is now harder to get a lock here. With the previous code: INFO Scanning frequency #1 725142857 Carrier(0x03) Signal= 67.46% C/N= 0.00% UCB= 0 postBER= 0 Viterbi(0x05) Signal= 67.08% C/N= 0.00% UCB= 0 postBER= 2097151 Viterbi(0x07) Signal= 67.54% C/N= 0.25% UCB= 165 postBER= 0 Sync (0x0f) Signal= 67.06% C/N= 0.23% UCB= 151 postBER= 0 Lock (0x1f) Signal= 67.58% C/N= 0.24% UCB= 160 postBER= 338688 Service #0 (60320) BAND HD channel 57.1.0 Service #1 (60345) BAND 1SEG channel 57.1.1 With the new code: INFO Scanning frequency #1 725142857 (0x00) Signal= 68.80% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.78% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.69% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.82% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.29% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.27% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.28% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.27% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.55% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.50% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.43% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.65% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.75% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.29% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.28% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.25% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.43% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.46% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.43% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.90% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.50% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.28% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.22% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.22% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.43% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.41% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.41% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 68.96% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.42% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.24% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.22% C/N= 0.00% UCB= 0 postBER= 0 RF (0x01) Signal= 69.25% C/N= 0.00% UCB= 0 postBER= 0 So, it seems that the changes broke something. Regards, Mauro [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: 0001-media-dib8000-correct-previous-commit.patch --] [-- Type: text/x-patch; name="0001-media-dib8000-correct-previous-commit.patch", Size: 2404 bytes --] From 6d5679558aa99d9763fb2d638de771a8f52c94fa Mon Sep 17 00:00:00 2001 From: Olivier Grenie <olivier.grenie@parrot.com> Date: Thu, 2 May 2013 16:11:14 +0200 Subject: [PATCH] [media] dib8000: correct previous commit The intend of this patch is to correct a previous commit. This commit corrects the behavior of the dib807x. Signed-off-by: Olivier Grenie <olivier.grenie@parrot.com> --- drivers/media/dvb-frontends/dib8000.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb-frontends/dib8000.c b/drivers/media/dvb-frontends/dib8000.c index 4ba7c90..a57926b 100644 --- a/drivers/media/dvb-frontends/dib8000.c +++ b/drivers/media/dvb-frontends/dib8000.c @@ -2439,7 +2439,7 @@ static int dib8000_autosearch_start(struct dvb_frontend *fe) if (state->revision == 0x8090) internal = dib8000_read32(state, 23) / 1000; - if (state->autosearch_state == AS_SEARCHING_FFT) { + if ((state->revision >= 0x8002) && (state->autosearch_state == AS_SEARCHING_FFT)) { dib8000_write_word(state, 37, 0x0065); /* P_ctrl_pha_off_max default values */ dib8000_write_word(state, 116, 0x0000); /* P_ana_gain to 0 */ @@ -2475,7 +2475,7 @@ static int dib8000_autosearch_start(struct dvb_frontend *fe) dib8000_write_word(state, 770, (dib8000_read_word(state, 770) & 0xdfff) | (1 << 13)); /* P_restart_ccg = 1 */ dib8000_write_word(state, 770, (dib8000_read_word(state, 770) & 0xdfff) | (0 << 13)); /* P_restart_ccg = 0 */ dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x7ff) | (0 << 15) | (1 << 13)); /* P_restart_search = 0; */ - } else if (state->autosearch_state == AS_SEARCHING_GUARD) { + } else if ((state->revision >= 0x8002) && (state->autosearch_state == AS_SEARCHING_GUARD)) { state->fe[0]->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K; state->fe[0]->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8; state->fe[0]->dtv_property_cache.inversion = 0; @@ -2577,7 +2577,7 @@ static int dib8000_autosearch_irq(struct dvb_frontend *fe) struct dib8000_state *state = fe->demodulator_priv; u16 irq_pending = dib8000_read_word(state, 1284); - if (state->autosearch_state == AS_SEARCHING_FFT) { + if ((state->revision >= 0x8002) && (state->autosearch_state == AS_SEARCHING_FFT)) { if (irq_pending & 0x1) { dprintk("dib8000_autosearch_irq: max correlation result available"); return 3; -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [GIT PULL FOR 3.10] DiBxxxx: fixes and improvements 2013-05-04 4:05 ` Olivier GRENIE @ 2013-06-02 17:03 ` Michael Krufky 0 siblings, 0 replies; 5+ messages in thread From: Michael Krufky @ 2013-06-02 17:03 UTC (permalink / raw) To: Olivier GRENIE Cc: Mauro Carvalho Chehab, linux-media@vger.kernel.org, Patrick BOETTCHER, Patrick Boettcher [-- Attachment #1: Type: text/plain, Size: 4246 bytes --] Olivier, I have regenerated your patch against the most recent codebase, as your patch no longer applies. (There were changes merged on the 29th of April that broke it.) The new patch is attached, but I am reluctant to merge it, as I do not have any description of the patch, and it lacks a sign-off. Please test this patch and confirm that it produces the desired effect, then resubmit with a short description and your sign-off. Best regards, Mike Krufky On Sat, May 4, 2013 at 12:05 AM, Olivier GRENIE <olivier.grenie@parrot.com> wrote: > Hello Mauro, > can you apply the attached patch. This patch correct the proposed patch by Patrick for the dib807x. Sorry to not have seen it before. > > regards, > Olivier > > ________________________________________ > From: Mauro Carvalho Chehab [mchehab@redhat.com] > Sent: Saturday, April 27, 2013 4:28 PM > To: Patrick Boettcher > Cc: linux-media@vger.kernel.org; Olivier GRENIE; Patrick BOETTCHER > Subject: Re: [GIT PULL FOR 3.10] DiBxxxx: fixes and improvements > > Hi Patrick, > > Em Mon, 22 Apr 2013 10:12:34 +0200 > Patrick Boettcher <pboettcher@kernellabs.com> escreveu: > >> Hi Mauro, >> >> These patches contains some fixes and changes for the DiBcom demods and >> SIPs. >> >> Please merge for 3.10 if possible. >> >> >> The following changes since commit 60d509fa6a9c4653a86ad830e4c4b30360b23f0e: >> >> Linux 3.9-rc8 (2013-04-21 14:38:45 -0700) >> >> are available in the git repository at: >> >> git://git.linuxtv.org/pb/media_tree.git/ master > > Hmm... I suspect that there's something wrong with those changes. > > Testing it with a dib8076 usb stick seems that the code is worse than > before, as it is now harder to get a lock here. > > With the previous code: > > INFO Scanning frequency #1 725142857 > Carrier(0x03) Signal= 67.46% C/N= 0.00% UCB= 0 postBER= 0 > Viterbi(0x05) Signal= 67.08% C/N= 0.00% UCB= 0 postBER= 2097151 > Viterbi(0x07) Signal= 67.54% C/N= 0.25% UCB= 165 postBER= 0 > Sync (0x0f) Signal= 67.06% C/N= 0.23% UCB= 151 postBER= 0 > Lock (0x1f) Signal= 67.58% C/N= 0.24% UCB= 160 postBER= 338688 > Service #0 (60320) BAND HD channel 57.1.0 > Service #1 (60345) BAND 1SEG channel 57.1.1 > > With the new code: > > INFO Scanning frequency #1 725142857 > (0x00) Signal= 68.80% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 68.78% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 68.69% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 69.82% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 69.29% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 69.27% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 69.28% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 69.27% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 68.55% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 68.50% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 68.43% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 68.65% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 69.75% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 69.29% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 69.28% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 69.25% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 68.43% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 68.46% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 68.43% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 68.90% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 69.50% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 69.28% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 69.22% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 69.22% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 68.43% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 68.41% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 68.41% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 68.96% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 69.42% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 69.24% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 69.22% C/N= 0.00% UCB= 0 postBER= 0 > RF (0x01) Signal= 69.25% C/N= 0.00% UCB= 0 postBER= 0 > > So, it seems that the changes broke something. > > Regards, > Mauro [-- Attachment #2: 2013-05-04-040550.patch --] [-- Type: application/octet-stream, Size: 1827 bytes --] diff --git a/drivers/media/dvb-frontends/dib8000.c b/drivers/media/dvb-frontends/dib8000.c index 9053614..487c253 100644 --- a/drivers/media/dvb-frontends/dib8000.c +++ b/drivers/media/dvb-frontends/dib8000.c @@ -2445,7 +2445,8 @@ static int dib8000_autosearch_start(struct dvb_frontend *fe) if (state->revision == 0x8090) internal = dib8000_read32(state, 23) / 1000; - if (state->autosearch_state == AS_SEARCHING_FFT) { + if ((state->revision >= 0x8002) && + (state->autosearch_state == AS_SEARCHING_FFT)) { dib8000_write_word(state, 37, 0x0065); /* P_ctrl_pha_off_max default values */ dib8000_write_word(state, 116, 0x0000); /* P_ana_gain to 0 */ @@ -2481,7 +2482,8 @@ static int dib8000_autosearch_start(struct dvb_frontend *fe) dib8000_write_word(state, 770, (dib8000_read_word(state, 770) & 0xdfff) | (1 << 13)); /* P_restart_ccg = 1 */ dib8000_write_word(state, 770, (dib8000_read_word(state, 770) & 0xdfff) | (0 << 13)); /* P_restart_ccg = 0 */ dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x7ff) | (0 << 15) | (1 << 13)); /* P_restart_search = 0; */ - } else if (state->autosearch_state == AS_SEARCHING_GUARD) { + } else if ((state->revision >= 0x8002) && + (state->autosearch_state == AS_SEARCHING_GUARD)) { c->transmission_mode = TRANSMISSION_MODE_8K; c->guard_interval = GUARD_INTERVAL_1_8; c->inversion = 0; @@ -2583,7 +2585,8 @@ static int dib8000_autosearch_irq(struct dvb_frontend *fe) struct dib8000_state *state = fe->demodulator_priv; u16 irq_pending = dib8000_read_word(state, 1284); - if (state->autosearch_state == AS_SEARCHING_FFT) { + if ((state->revision >= 0x8002) && + (state->autosearch_state == AS_SEARCHING_FFT)) { if (irq_pending & 0x1) { dprintk("dib8000_autosearch_irq: max correlation result available"); return 3; ^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-06-02 17:03 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-04-22 8:12 [GIT PULL FOR 3.10] DiBxxxx: fixes and improvements Patrick Boettcher 2013-04-27 14:28 ` Mauro Carvalho Chehab 2013-04-28 20:28 ` Olivier GRENIE 2013-05-04 4:05 ` Olivier GRENIE 2013-06-02 17:03 ` Michael Krufky
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox