[PATCH 14/41] Documentation: dt: media: fix spelling mistake

[PATCH 14/41] Documentation: dt: media: fix spelling mistake

[Eric Engestrom]

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
---
 Documentation/devicetree/bindings/media/xilinx/video.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/media/xilinx/video.txt b/Documentation/devicetree/bindings/media/xilinx/video.txt
index cbd46fa..68ac210 100644
--- a/Documentation/devicetree/bindings/media/xilinx/video.txt
+++ b/Documentation/devicetree/bindings/media/xilinx/video.txt
@@ -20,7 +20,7 @@ The following properties are common to all Xilinx video IP cores.
 - xlnx,video-format: This property represents a video format transmitted on an
   AXI bus between video IP cores, using its VF code as defined in "AXI4-Stream
   Video IP and System Design Guide" [UG934]. How the format relates to the IP
-  core is decribed in the IP core bindings documentation.
+  core is described in the IP core bindings documentation.
 
 - xlnx,video-width: This property qualifies the video format with the sample
   width expressed as a number of bits per pixel component. All components must
-- 
2.8.0

Re: [PATCH 14/41] Documentation: dt: media: fix spelling mistake

[Rob Herring]

On Mon, Apr 25, 2016 at 01:24:11AM +0100, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <eric@engestrom.ch>

Applied, thanks.

Rob

> ---
>  Documentation/devicetree/bindings/media/xilinx/video.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/xilinx/video.txt b/Documentation/devicetree/bindings/media/xilinx/video.txt
> index cbd46fa..68ac210 100644
> --- a/Documentation/devicetree/bindings/media/xilinx/video.txt
> +++ b/Documentation/devicetree/bindings/media/xilinx/video.txt
> @@ -20,7 +20,7 @@ The following properties are common to all Xilinx video IP cores.
>  - xlnx,video-format: This property represents a video format transmitted on an
>    AXI bus between video IP cores, using its VF code as defined in "AXI4-Stream
>    Video IP and System Design Guide" [UG934]. How the format relates to the IP
> -  core is decribed in the IP core bindings documentation.
> +  core is described in the IP core bindings documentation.
>  
>  - xlnx,video-width: This property qualifies the video format with the sample
>    width expressed as a number of bits per pixel component. All components must
> -- 
> 2.8.0
> 

[PATCH 23/41] Documentation: DocBook: fix spelling mistake

[Eric Engestrom]

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
---
 Documentation/DocBook/media/dvb/net.xml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/DocBook/media/dvb/net.xml b/Documentation/DocBook/media/dvb/net.xml
index d2e44b7..da095ed 100644
--- a/Documentation/DocBook/media/dvb/net.xml
+++ b/Documentation/DocBook/media/dvb/net.xml
@@ -15,7 +15,7 @@
     that are present on the transport stream. This is done through
     <constant>/dev/dvb/adapter?/net?</constant> device node.
     The data will be available via virtual <constant>dvb?_?</constant>
-    network interfaces, and will be controled/routed via the standard
+    network interfaces, and will be controlled/routed via the standard
     ip tools (like ip, route, netstat, ifconfig, etc).</para>
 <para> Data types and and ioctl definitions are defined via
     <constant>linux/dvb/net.h</constant> header.</para>
-- 
2.8.0

[PATCH 37/41] Documentation: video4linux: fix spelling mistakes

[Eric Engestrom]

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
---
 Documentation/video4linux/vivid.txt | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/video4linux/vivid.txt b/Documentation/video4linux/vivid.txt
index e35d376..8da5d2a 100644
--- a/Documentation/video4linux/vivid.txt
+++ b/Documentation/video4linux/vivid.txt
@@ -294,7 +294,7 @@ the result will be.
 
 These inputs support all combinations of the field setting. Special care has
 been taken to faithfully reproduce how fields are handled for the different
-TV standards. This is particularly noticable when generating a horizontally
+TV standards. This is particularly noticeable when generating a horizontally
 moving image so the temporal effect of using interlaced formats becomes clearly
 visible. For 50 Hz standards the top field is the oldest and the bottom field
 is the newest in time. For 60 Hz standards that is reversed: the bottom field
@@ -313,7 +313,7 @@ will be SMPTE-170M.
 The pixel aspect ratio will depend on the TV standard. The video aspect ratio
 can be selected through the 'Standard Aspect Ratio' Vivid control.
 Choices are '4x3', '16x9' which will give letterboxed widescreen video and
-'16x9 Anomorphic' which will give full screen squashed anamorphic widescreen
+'16x9 Anamorphic' which will give full screen squashed anamorphic widescreen
 video that will need to be scaled accordingly.
 
 The TV 'tuner' supports a frequency range of 44-958 MHz. Channels are available
@@ -862,7 +862,7 @@ RDS Radio Text:
 RDS Stereo:
 RDS Artificial Head:
 RDS Compressed:
-RDS Dymanic PTY:
+RDS Dynamic PTY:
 RDS Traffic Announcement:
 RDS Traffic Program:
 RDS Music: these are all controls that set the RDS data that is transmitted by
-- 
2.8.0