From: Helen Koike <helen.koike@collabora.com>
To: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
Cc: linux-media@vger.kernel.org, kernel@collabora.com,
linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
hans.verkuil@cisco.com, skhan@linuxfoundation.org,
mchehab@kernel.org
Subject: Re: [PATCH v2 2/3] media: staging: rkisp1: use v4l2_pipeline_stream_{enable,disable} helpers
Date: Tue, 7 Apr 2020 17:51:08 -0300 [thread overview]
Message-ID: <152f9441-75cf-b400-d57e-e8e003890943@collabora.com> (raw)
In-Reply-To: <20200407193453.GF1716317@oden.dyn.berto.se>
On 4/7/20 4:34 PM, Niklas Söderlund wrote:
> Hi Helen,
>
> Thanks for your work.
>
> On 2020-04-03 18:33:11 -0300, Helen Koike wrote:
>> Use v4l2_pipeline_stream_{enable,disable} to call .s_stream() subdevice
>> callbacks through the pipeline.
>>
>> Tested by streaming on RockPi4 with imx219 and on Scarlet Chromebook.
>>
>> Signed-off-by: Helen Koike <helen.koike@collabora.com>
>>
>> ---
>>
>> Changes in v2:
>> - rebase on top of new helpers prototypes
>>
>> drivers/staging/media/rkisp1/rkisp1-capture.c | 76 +------------------
>> 1 file changed, 3 insertions(+), 73 deletions(-)
>>
>> diff --git a/drivers/staging/media/rkisp1/rkisp1-capture.c b/drivers/staging/media/rkisp1/rkisp1-capture.c
>> index 24fe6a7888aa4..0c2a357c4a12a 100644
>> --- a/drivers/staging/media/rkisp1/rkisp1-capture.c
>> +++ b/drivers/staging/media/rkisp1/rkisp1-capture.c
>> @@ -838,71 +838,6 @@ static void rkisp1_return_all_buffers(struct rkisp1_capture *cap,
>> spin_unlock_irqrestore(&cap->buf.lock, flags);
>> }
>>
>> -/*
>> - * rkisp1_pipeline_sink_walk - Walk through the pipeline and call cb
>> - * @from: entity at which to start pipeline walk
>> - * @until: entity at which to stop pipeline walk
>> - *
>> - * Walk the entities chain starting at the pipeline video node and stop
>> - * all subdevices in the chain.
>> - *
>> - * If the until argument isn't NULL, stop the pipeline walk when reaching the
>> - * until entity. This is used to disable a partially started pipeline due to a
>> - * subdev start error.
>> - */
>> -static int rkisp1_pipeline_sink_walk(struct media_entity *from,
>> - struct media_entity *until,
>> - int (*cb)(struct media_entity *from,
>> - struct media_entity *curr))
>> -{
>> - struct media_entity *entity = from;
>> - struct media_pad *pad;
>> - unsigned int i;
>> - int ret;
>> -
>> - while (1) {
>> - pad = NULL;
>> - /* Find remote source pad */
>> - for (i = 0; i < entity->num_pads; i++) {
>> - struct media_pad *spad = &entity->pads[i];
>> -
>> - if (!(spad->flags & MEDIA_PAD_FL_SINK))
>> - continue;
>> - pad = media_entity_remote_pad(spad);
>> - if (pad && is_media_entity_v4l2_subdev(pad->entity))
>> - break;
>> - }
>> - if (!pad || !is_media_entity_v4l2_subdev(pad->entity))
>> - break;
>> -
>> - entity = pad->entity;
>> - if (entity == until)
>> - break;
>> -
>> - ret = cb(from, entity);
>> - if (ret)
>> - return ret;
>> - }
>> -
>> - return 0;
>> -}
>> -
>> -static int rkisp1_pipeline_disable_cb(struct media_entity *from,
>> - struct media_entity *curr)
>> -{
>> - struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(curr);
>> -
>> - return v4l2_subdev_call(sd, video, s_stream, false);
>> -}
>> -
>> -static int rkisp1_pipeline_enable_cb(struct media_entity *from,
>> - struct media_entity *curr)
>> -{
>> - struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(curr);
>> -
>> - return v4l2_subdev_call(sd, video, s_stream, true);
>> -}
>> -
>> static void rkisp1_stream_stop(struct rkisp1_capture *cap)
>> {
>> int ret;
>> @@ -929,11 +864,7 @@ static void rkisp1_vb2_stop_streaming(struct vb2_queue *queue)
>>
>> rkisp1_stream_stop(cap);
>> media_pipeline_stop(&node->vdev.entity);
>> - ret = rkisp1_pipeline_sink_walk(&node->vdev.entity, NULL,
>> - rkisp1_pipeline_disable_cb);
>> - if (ret)
>> - dev_err(rkisp1->dev,
>> - "pipeline stream-off failed error:%d\n", ret);
>> + v4l2_pipeline_stream_disable(&node->vdev);
>>
>> rkisp1_return_all_buffers(cap, VB2_BUF_STATE_ERROR);
>>
>> @@ -1005,8 +936,7 @@ rkisp1_vb2_start_streaming(struct vb2_queue *queue, unsigned int count)
>> rkisp1_stream_start(cap);
>>
>> /* start sub-devices */
>> - ret = rkisp1_pipeline_sink_walk(entity, NULL,
>> - rkisp1_pipeline_enable_cb);
>> + ret = v4l2_pipeline_stream_enable(&cap->vnode.vdev);
>> if (ret)
>> goto err_stop_stream;
>>
>> @@ -1019,7 +949,7 @@ rkisp1_vb2_start_streaming(struct vb2_queue *queue, unsigned int count)
>> return 0;
>>
>> err_pipe_disable:
>> - rkisp1_pipeline_sink_walk(entity, NULL, rkisp1_pipeline_disable_cb);
>> + v4l2_pipeline_stream_disable(entity, &cap->rkisp1->pipe);
>
> This does not match the prototype for v4l2_pipeline_stream_disable() or
> am I missing something ?
You are right, I must have messed with my branches, because I'm sure I compiled and tested it.
Thanks for catching this.
Helen
>
>> err_stop_stream:
>> rkisp1_stream_stop(cap);
>> v4l2_pipeline_pm_put(entity);
>> --
>> 2.26.0
>>
>
next prev parent reply other threads:[~2020-04-07 20:51 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-03 21:33 [PATCH v2 0/3] media: add v4l2_pipeline_stream_{enable,disable} helpers Helen Koike
2020-04-03 21:33 ` [PATCH v2 1/3] media: v4l2-common: add helper functions to call s_stream() callbacks Helen Koike
2020-04-04 23:01 ` kbuild test robot
2020-04-05 0:23 ` kbuild test robot
2020-04-07 19:24 ` Niklas Söderlund
2020-04-07 20:49 ` Helen Koike
2020-04-03 21:33 ` [PATCH v2 2/3] media: staging: rkisp1: use v4l2_pipeline_stream_{enable,disable} helpers Helen Koike
2020-04-04 23:54 ` kbuild test robot
2020-04-07 19:34 ` Niklas Söderlund
2020-04-07 20:51 ` Helen Koike [this message]
2020-04-03 21:33 ` [PATCH v2 3/3] media: vimc: " Helen Koike
2020-04-07 19:36 ` [PATCH v2 0/3] media: add " Niklas Söderlund
2020-04-08 0:05 ` Helen Koike
2020-04-08 0:15 ` Niklas Söderlund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=152f9441-75cf-b400-d57e-e8e003890943@collabora.com \
--to=helen.koike@collabora.com \
--cc=hans.verkuil@cisco.com \
--cc=kernel@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mchehab@kernel.org \
--cc=niklas.soderlund@ragnatech.se \
--cc=skhan@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox