[PATCH V2] drm/exynos: Add fallback option to get non physically continous memory for fb

[PATCH V2] drm/exynos: Add fallback option to get non physically continous memory for fb

[Vikas Sajjan]

While trying to get boot-logo up on exynos5420 SMDK which has eDP panel
connected with resolution 2560x1600, following error occured even with
IOMMU enabled:
[0.880000] [drm:lowlevel_buffer_allocate] *ERROR* failed to allocate buffer.
[0.890000] [drm] Initialized exynos 1.0.0 20110530 on minor 0

To address the case where physically continous memory MAY NOT be a
mandatory requirement for fb, the patch adds a feature to get non physically
continous memory for fb if IOMMU is supported and if CONTIG memory allocation
fails.

Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org>
Signed-off-by: Arun Kumar <arun.kk@samsung.com>
---
changes since v1:
	 - Modified to add the fallback patch if CONTIG alloc fails as suggested
	 by Rob Clark robdclark@gmail.com and Tomasz Figa <tomasz.figa@gmail.com>.

	 - changed the commit message.
---
 drivers/gpu/drm/exynos/exynos_drm_fbdev.c |   19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
index 8e60bd6..9a4b886 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
@@ -16,6 +16,7 @@
 #include <drm/drm_crtc.h>
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_crtc_helper.h>
+#include <drm/exynos_drm.h>
 
 #include "exynos_drm_drv.h"
 #include "exynos_drm_fb.h"
@@ -165,11 +166,21 @@ static int exynos_drm_fbdev_create(struct drm_fb_helper *helper,
 
 	size = mode_cmd.pitches[0] * mode_cmd.height;
 
-	/* 0 means to allocate physically continuous memory */
-	exynos_gem_obj = exynos_drm_gem_create(dev, 0, size);
+	exynos_gem_obj = exynos_drm_gem_create(dev, EXYNOS_BO_CONTIG, size);
 	if (IS_ERR(exynos_gem_obj)) {
-		ret = PTR_ERR(exynos_gem_obj);
-		goto err_release_framebuffer;
+		/*
+		 * If IOMMU is supported then try to get buffer from
+		 * non-continous memory area
+		 */
+		if (is_drm_iommu_supported(dev))
+			exynos_gem_obj = exynos_drm_gem_create(dev,
+						EXYNOS_BO_NONCONTIG, size);
+		if (IS_ERR(exynos_gem_obj)) {
+			ret = PTR_ERR(exynos_gem_obj);
+			goto err_release_framebuffer;
+		}
+		dev_warn(&pdev->dev, "exynos_gem_obj for FB is allocated with\n"
+				"non physically continuous memory\n");
 	}
 
 	exynos_fbdev->exynos_gem_obj = exynos_gem_obj;
-- 
1.7.9.5

Re: [PATCH V2] drm/exynos: Add fallback option to get non physically continous memory for fb

[Rob Clark]

On Mon, Aug 5, 2013 at 5:44 AM, Vikas Sajjan <vikas.sajjan@linaro.org> wrote:
> While trying to get boot-logo up on exynos5420 SMDK which has eDP panel
> connected with resolution 2560x1600, following error occured even with
> IOMMU enabled:
> [0.880000] [drm:lowlevel_buffer_allocate] *ERROR* failed to allocate buffer.
> [0.890000] [drm] Initialized exynos 1.0.0 20110530 on minor 0
>
> To address the case where physically continous memory MAY NOT be a
> mandatory requirement for fb, the patch adds a feature to get non physically
> continous memory for fb if IOMMU is supported and if CONTIG memory allocation
> fails.


Reviewed-by: Rob Clark <robdclark@gmail.com>

>
> Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org>
> Signed-off-by: Arun Kumar <arun.kk@samsung.com>
> ---
> changes since v1:
>          - Modified to add the fallback patch if CONTIG alloc fails as suggested
>          by Rob Clark robdclark@gmail.com and Tomasz Figa <tomasz.figa@gmail.com>.
>
>          - changed the commit message.
> ---
>  drivers/gpu/drm/exynos/exynos_drm_fbdev.c |   19 +++++++++++++++----
>  1 file changed, 15 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
> index 8e60bd6..9a4b886 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
> @@ -16,6 +16,7 @@
>  #include <drm/drm_crtc.h>
>  #include <drm/drm_fb_helper.h>
>  #include <drm/drm_crtc_helper.h>
> +#include <drm/exynos_drm.h>
>
>  #include "exynos_drm_drv.h"
>  #include "exynos_drm_fb.h"
> @@ -165,11 +166,21 @@ static int exynos_drm_fbdev_create(struct drm_fb_helper *helper,
>
>         size = mode_cmd.pitches[0] * mode_cmd.height;
>
> -       /* 0 means to allocate physically continuous memory */
> -       exynos_gem_obj = exynos_drm_gem_create(dev, 0, size);
> +       exynos_gem_obj = exynos_drm_gem_create(dev, EXYNOS_BO_CONTIG, size);
>         if (IS_ERR(exynos_gem_obj)) {
> -               ret = PTR_ERR(exynos_gem_obj);
> -               goto err_release_framebuffer;
> +               /*
> +                * If IOMMU is supported then try to get buffer from
> +                * non-continous memory area
> +                */
> +               if (is_drm_iommu_supported(dev))
> +                       exynos_gem_obj = exynos_drm_gem_create(dev,
> +                                               EXYNOS_BO_NONCONTIG, size);
> +               if (IS_ERR(exynos_gem_obj)) {
> +                       ret = PTR_ERR(exynos_gem_obj);
> +                       goto err_release_framebuffer;
> +               }
> +               dev_warn(&pdev->dev, "exynos_gem_obj for FB is allocated with\n"
> +                               "non physically continuous memory\n");
>         }
>
>         exynos_fbdev->exynos_gem_obj = exynos_gem_obj;
> --
> 1.7.9.5
>

Re: [PATCH V2] drm/exynos: Add fallback option to get non physically continous memory for fb

[Tomasz Figa]

On Monday 05 of August 2013 15:14:42 Vikas Sajjan wrote:
> While trying to get boot-logo up on exynos5420 SMDK which has eDP panel
> connected with resolution 2560x1600, following error occured even with
> IOMMU enabled:
> [0.880000] [drm:lowlevel_buffer_allocate] *ERROR* failed to allocate
> buffer. [0.890000] [drm] Initialized exynos 1.0.0 20110530 on minor 0
> 
> To address the case where physically continous memory MAY NOT be a
> mandatory requirement for fb, the patch adds a feature to get non
> physically continous memory for fb if IOMMU is supported and if CONTIG
> memory allocation fails.
> 
> Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org>
> Signed-off-by: Arun Kumar <arun.kk@samsung.com>
> ---
> changes since v1:
> 	 - Modified to add the fallback patch if CONTIG alloc fails as suggested
> by Rob Clark robdclark@gmail.com and Tomasz Figa
> <tomasz.figa@gmail.com>.
> 
> 	 - changed the commit message.
> ---
>  drivers/gpu/drm/exynos/exynos_drm_fbdev.c |   19 +++++++++++++++----
>  1 file changed, 15 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
> b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c index 8e60bd6..9a4b886
> 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
> @@ -16,6 +16,7 @@
>  #include <drm/drm_crtc.h>
>  #include <drm/drm_fb_helper.h>
>  #include <drm/drm_crtc_helper.h>
> +#include <drm/exynos_drm.h>
> 
>  #include "exynos_drm_drv.h"
>  #include "exynos_drm_fb.h"
> @@ -165,11 +166,21 @@ static int exynos_drm_fbdev_create(struct
> drm_fb_helper *helper,
> 
>  	size = mode_cmd.pitches[0] * mode_cmd.height;
> 
> -	/* 0 means to allocate physically continuous memory */
> -	exynos_gem_obj = exynos_drm_gem_create(dev, 0, size);
> +	exynos_gem_obj = exynos_drm_gem_create(dev, EXYNOS_BO_CONTIG, size);

You can put the fallback here like this:
	if (IS_ERR(exynos_gem_obj) && is_drm_iommu_supported(dev)) {
		/*
		 * If IOMMU is supported then try to get buffer from
		 * non-continous memory area
		 */
		dev_warn(&pdev->dev, "contiguous FB allocation failed, falling back to non-contiguous\n");
		exynos_gem_obj = exynos_drm_gem_create(dev,
										EXYNOS_BO_NONCONTIG, size);
	}

>  	if (IS_ERR(exynos_gem_obj)) {
> -		ret = PTR_ERR(exynos_gem_obj);
> -		goto err_release_framebuffer;

And then you can leave this original check untouched, reducing the
diffstat and unnecessary code indentation.

> +		/*
> +		 * If IOMMU is supported then try to get buffer from
> +		 * non-continous memory area
> +		 */
> +		if (is_drm_iommu_supported(dev))
> +			exynos_gem_obj = exynos_drm_gem_create(dev,
> +						EXYNOS_BO_NONCONTIG, size);
> +		if (IS_ERR(exynos_gem_obj)) {
> +			ret = PTR_ERR(exynos_gem_obj);
> +			goto err_release_framebuffer;
> +		}
> +		dev_warn(&pdev->dev, "exynos_gem_obj for FB is allocated with\n"
> +				"non physically continuous memory\n");

Please don't split messages into multiple lines, because this makes
grepping for them harder (and checkpatch complains).

Best regards,
Tomasz