major brakethrough on HVR4000

major brakethrough on HVR4000

[Lars Schotte]

i have played w/ szap-s2 parameters and I got tuning, BUT not a picture
yet, so that only means that it can tune in, as long as i have no
picture and not a usable stream for dvb-s2 again, it means NOTHING.

here the output of:
./szap-s2 -O 20 -C 23 -M 5 -S 1 -r -c ~/.mplayer/channels.conf "arte
HD(ZDFvision)"
....
zapping to 449 'arte HD(ZDFvision)':
delivery DVB-S2, modulation 8PSK
sat 0, frequency 11361 MHz H, symbolrate 22000000, coderate 2/3,
rolloff 0.20 vpid 0x1842, apid 0x184d, sid 0x2b70
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 1f | signal dac0 | snr 0000 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK status 1f | signal dac0 | snr 0000 | ber 00000000 | unc
00000000 | FE_HAS_LOCK status 1f | signal dac0 | snr fb33 | ber
00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal dac0 | snr
fb33 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal
dac0 | snr fb33 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f |
signal dac0 | snr fb33 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal db40 | snr fb33 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK status 1f | signal dac0 | snr fb33 | ber 00000000 | unc
00000000 | FE_HAS_LOCK status 1f | signal dac0 | snr fccd | ber
00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal dac0 | snr
fccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal
dac0 | snr fccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f |
signal dac0 | snr fccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal dac0 | snr fccd | ber 00000000 | unc 00000000 |
FE_HAS_LOCK status 1f | signal db40 | snr fccd | ber 00000000 | unc
00000000 | FE_HAS_LOCK

- and this coderate 2/3 setting was it that made the difference.