[PATCH v7 27/36] drm: rcar-du: fix common struct sg_table related issues

[PATCH v7 27/36] drm: rcar-du: fix common struct sg_table related issues

[Marek Szyprowski]

The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().

struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).

It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.

To avoid such issues, lets use a common dma-mapping wrappers operating
directly on the struct sg_table objects and use scatterlist page
iterators where possible. This, almost always, hides references to the
nents and orig_nents entries, making the code robust, easier to follow
and copy/paste safe.

dma_map_sgtable() function returns zero or an error code, so adjust the
return value check for the vsp1_du_map_sg() function.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/gpu/drm/rcar-du/rcar_du_vsp.c  | 3 +--
 drivers/media/platform/vsp1/vsp1_drm.c | 8 ++++----
 2 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
index f1a81c9b184d..a27bff999649 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
@@ -197,9 +197,8 @@ int rcar_du_vsp_map_fb(struct rcar_du_vsp *vsp, struct drm_framebuffer *fb,
 			goto fail;
 
 		ret = vsp1_du_map_sg(vsp->vsp, sgt);
-		if (!ret) {
+		if (ret) {
 			sg_free_table(sgt);
-			ret = -ENOMEM;
 			goto fail;
 		}
 	}
diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c
index a4a45d68a6ef..86d5e3f4b1ff 100644
--- a/drivers/media/platform/vsp1/vsp1_drm.c
+++ b/drivers/media/platform/vsp1/vsp1_drm.c
@@ -912,8 +912,8 @@ int vsp1_du_map_sg(struct device *dev, struct sg_table *sgt)
 	 * skip cache sync. This will need to be revisited when support for
 	 * non-coherent buffers will be added to the DU driver.
 	 */
-	return dma_map_sg_attrs(vsp1->bus_master, sgt->sgl, sgt->nents,
-				DMA_TO_DEVICE, DMA_ATTR_SKIP_CPU_SYNC);
+	return dma_map_sgtable(vsp1->bus_master, sgt, DMA_TO_DEVICE,
+			       DMA_ATTR_SKIP_CPU_SYNC);
 }
 EXPORT_SYMBOL_GPL(vsp1_du_map_sg);
 
@@ -921,8 +921,8 @@ void vsp1_du_unmap_sg(struct device *dev, struct sg_table *sgt)
 {
 	struct vsp1_device *vsp1 = dev_get_drvdata(dev);
 
-	dma_unmap_sg_attrs(vsp1->bus_master, sgt->sgl, sgt->nents,
-			   DMA_TO_DEVICE, DMA_ATTR_SKIP_CPU_SYNC);
+	dma_unmap_sgtable(vsp1->bus_master, sgt, DMA_TO_DEVICE,
+			  DMA_ATTR_SKIP_CPU_SYNC);
 }
 EXPORT_SYMBOL_GPL(vsp1_du_unmap_sg);
 
-- 
2.17.1

[PATCH v7 28/36] dmabuf: fix common struct sg_table related issues

[Marek Szyprowski]

The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().

struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).

It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.

To avoid such issues, lets use a common dma-mapping wrappers operating
directly on the struct sg_table objects and use scatterlist page
iterators where possible. This, almost always, hides references to the
nents and orig_nents entries, making the code robust, easier to follow
and copy/paste safe.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
---
 drivers/dma-buf/heaps/heap-helpers.c | 13 ++++++-------
 drivers/dma-buf/udmabuf.c            |  7 +++----
 2 files changed, 9 insertions(+), 11 deletions(-)

diff --git a/drivers/dma-buf/heaps/heap-helpers.c b/drivers/dma-buf/heaps/heap-helpers.c
index 9f964ca3f59c..d0696cf937af 100644
--- a/drivers/dma-buf/heaps/heap-helpers.c
+++ b/drivers/dma-buf/heaps/heap-helpers.c
@@ -140,13 +140,12 @@ struct sg_table *dma_heap_map_dma_buf(struct dma_buf_attachment *attachment,
 				      enum dma_data_direction direction)
 {
 	struct dma_heaps_attachment *a = attachment->priv;
-	struct sg_table *table;
-
-	table = &a->table;
+	struct sg_table *table = &a->table;
+	int ret;
 
-	if (!dma_map_sg(attachment->dev, table->sgl, table->nents,
-			direction))
-		table = ERR_PTR(-ENOMEM);
+	ret = dma_map_sgtable(attachment->dev, table, direction, 0);
+	if (ret)
+		table = ERR_PTR(ret);
 	return table;
 }
 
@@ -154,7 +153,7 @@ static void dma_heap_unmap_dma_buf(struct dma_buf_attachment *attachment,
 				   struct sg_table *table,
 				   enum dma_data_direction direction)
 {
-	dma_unmap_sg(attachment->dev, table->sgl, table->nents, direction);
+	dma_unmap_sgtable(attachment->dev, table, direction, 0);
 }
 
 static vm_fault_t dma_heap_vm_fault(struct vm_fault *vmf)
diff --git a/drivers/dma-buf/udmabuf.c b/drivers/dma-buf/udmabuf.c
index acb26c627d27..89e293bd9252 100644
--- a/drivers/dma-buf/udmabuf.c
+++ b/drivers/dma-buf/udmabuf.c
@@ -63,10 +63,9 @@ static struct sg_table *get_sg_table(struct device *dev, struct dma_buf *buf,
 					GFP_KERNEL);
 	if (ret < 0)
 		goto err;
-	if (!dma_map_sg(dev, sg->sgl, sg->nents, direction)) {
-		ret = -EINVAL;
+	ret = dma_map_sgtable(dev, sg, direction, 0);
+	if (ret < 0)
 		goto err;
-	}
 	return sg;
 
 err:
@@ -78,7 +77,7 @@ static struct sg_table *get_sg_table(struct device *dev, struct dma_buf *buf,
 static void put_sg_table(struct device *dev, struct sg_table *sg,
 			 enum dma_data_direction direction)
 {
-	dma_unmap_sg(dev, sg->sgl, sg->nents, direction);
+	dma_unmap_sgtable(dev, sg, direction, 0);
 	sg_free_table(sg);
 	kfree(sg);
 }
-- 
2.17.1

[PATCH v7 31/36] staging: tegra-vde: fix common struct sg_table related issues

[Marek Szyprowski]

The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().

struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).

It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.

To avoid such issues, lets use a common dma-mapping wrappers operating
directly on the struct sg_table objects and use scatterlist page
iterators where possible. This, almost always, hides references to the
nents and orig_nents entries, making the code robust, easier to follow
and copy/paste safe.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/staging/media/tegra-vde/iommu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/media/tegra-vde/iommu.c b/drivers/staging/media/tegra-vde/iommu.c
index 6af863d92123..adf8dc7ee25c 100644
--- a/drivers/staging/media/tegra-vde/iommu.c
+++ b/drivers/staging/media/tegra-vde/iommu.c
@@ -36,8 +36,8 @@ int tegra_vde_iommu_map(struct tegra_vde *vde,
 
 	addr = iova_dma_addr(&vde->iova, iova);
 
-	size = iommu_map_sg(vde->domain, addr, sgt->sgl, sgt->nents,
-			    IOMMU_READ | IOMMU_WRITE);
+	size = iommu_map_sgtable(vde->domain, addr, sgt,
+				 IOMMU_READ | IOMMU_WRITE);
 	if (!size) {
 		__free_iova(&vde->iova, iova);
 		return -ENXIO;
-- 
2.17.1

Re: [PATCH v7 31/36] staging: tegra-vde: fix common struct sg_table related issues

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 2655 bytes --]

Hi Marek,

I love your patch! Yet something to improve:

[auto build test ERROR on next-20200618]
[also build test ERROR on v5.8-rc1]
[cannot apply to linuxtv-media/master staging/staging-testing drm-exynos/exynos-drm-next drm-intel/for-linux-next linus/master v5.8-rc1 v5.7 v5.7-rc7]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use  as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Marek-Szyprowski/DRM-fix-struct-sg_table-nents-vs-orig_nents-misuse/20200619-184302
base:    ce2cc8efd7a40cbd17841add878cb691d0ce0bba
config: c6x-allyesconfig (attached as .config)
compiler: c6x-elf-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=c6x 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   drivers/staging/media/tegra-vde/iommu.c: In function 'tegra_vde_iommu_map':
>> drivers/staging/media/tegra-vde/iommu.c:39:9: error: implicit declaration of function 'iommu_map_sgtable'; did you mean 'dma_map_sgtable'? [-Werror=implicit-function-declaration]
      39 |  size = iommu_map_sgtable(vde->domain, addr, sgt,
         |         ^~~~~~~~~~~~~~~~~
         |         dma_map_sgtable
   cc1: some warnings being treated as errors

vim +39 drivers/staging/media/tegra-vde/iommu.c

    18	
    19	int tegra_vde_iommu_map(struct tegra_vde *vde,
    20				struct sg_table *sgt,
    21				struct iova **iovap,
    22				size_t size)
    23	{
    24		struct iova *iova;
    25		unsigned long shift;
    26		unsigned long end;
    27		dma_addr_t addr;
    28	
    29		end = vde->domain->geometry.aperture_end;
    30		size = iova_align(&vde->iova, size);
    31		shift = iova_shift(&vde->iova);
    32	
    33		iova = alloc_iova(&vde->iova, size >> shift, end >> shift, true);
    34		if (!iova)
    35			return -ENOMEM;
    36	
    37		addr = iova_dma_addr(&vde->iova, iova);
    38	
  > 39		size = iommu_map_sgtable(vde->domain, addr, sgt,
    40					 IOMMU_READ | IOMMU_WRITE);
    41		if (!size) {
    42			__free_iova(&vde->iova, iova);
    43			return -ENXIO;
    44		}
    45	
    46		*iovap = iova;
    47	
    48		return 0;
    49	}
    50	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 53670 bytes --]

Re: [PATCH v7 31/36] staging: tegra-vde: fix common struct sg_table related issues

[Dmitry Osipenko]

В Fri, 19 Jun 2020 12:36:31 +0200
Marek Szyprowski <m.szyprowski@samsung.com> пишет:

> The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg()
> function returns the number of the created entries in the DMA address
> space. However the subsequent calls to the
> dma_sync_sg_for_{device,cpu}() and dma_unmap_sg must be called with
> the original number of the entries passed to the dma_map_sg().
> 
> struct sg_table is a common structure used for describing a
> non-contiguous memory buffer, used commonly in the DRM and graphics
> subsystems. It consists of a scatterlist with memory pages and DMA
> addresses (sgl entry), as well as the number of scatterlist entries:
> CPU pages (orig_nents entry) and DMA mapped pages (nents entry).
> 
> It turned out that it was a common mistake to misuse nents and
> orig_nents entries, calling DMA-mapping functions with a wrong number
> of entries or ignoring the number of mapped entries returned by the
> dma_map_sg() function.
> 
> To avoid such issues, lets use a common dma-mapping wrappers operating
> directly on the struct sg_table objects and use scatterlist page
> iterators where possible. This, almost always, hides references to the
> nents and orig_nents entries, making the code robust, easier to follow
> and copy/paste safe.
> 
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
> ---
>  drivers/staging/media/tegra-vde/iommu.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/staging/media/tegra-vde/iommu.c
> b/drivers/staging/media/tegra-vde/iommu.c index
> 6af863d92123..adf8dc7ee25c 100644 ---
> a/drivers/staging/media/tegra-vde/iommu.c +++
> b/drivers/staging/media/tegra-vde/iommu.c @@ -36,8 +36,8 @@ int
> tegra_vde_iommu_map(struct tegra_vde *vde, 
>  	addr = iova_dma_addr(&vde->iova, iova);
>  
> -	size = iommu_map_sg(vde->domain, addr, sgt->sgl, sgt->nents,
> -			    IOMMU_READ | IOMMU_WRITE);
> +	size = iommu_map_sgtable(vde->domain, addr, sgt,
> +				 IOMMU_READ | IOMMU_WRITE);
>  	if (!size) {
>  		__free_iova(&vde->iova, iova);
>  		return -ENXIO;

Ahh, I saw the build failure report. You're changing the DMA API in
this series, while DMA API isn't used by this driver, it uses IOMMU
API. Hence there is no need to touch this code. Similar problem in the
host1x driver patch.

Re: [PATCH v7 31/36] staging: tegra-vde: fix common struct sg_table related issues

[Marek Szyprowski]

On 21.06.2020 06:00, Dmitry Osipenko wrote:
> В Fri, 19 Jun 2020 12:36:31 +0200
> Marek Szyprowski <m.szyprowski@samsung.com> пишет:
>
>> The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg()
>> function returns the number of the created entries in the DMA address
>> space. However the subsequent calls to the
>> dma_sync_sg_for_{device,cpu}() and dma_unmap_sg must be called with
>> the original number of the entries passed to the dma_map_sg().
>>
>> struct sg_table is a common structure used for describing a
>> non-contiguous memory buffer, used commonly in the DRM and graphics
>> subsystems. It consists of a scatterlist with memory pages and DMA
>> addresses (sgl entry), as well as the number of scatterlist entries:
>> CPU pages (orig_nents entry) and DMA mapped pages (nents entry).
>>
>> It turned out that it was a common mistake to misuse nents and
>> orig_nents entries, calling DMA-mapping functions with a wrong number
>> of entries or ignoring the number of mapped entries returned by the
>> dma_map_sg() function.
>>
>> To avoid such issues, lets use a common dma-mapping wrappers operating
>> directly on the struct sg_table objects and use scatterlist page
>> iterators where possible. This, almost always, hides references to the
>> nents and orig_nents entries, making the code robust, easier to follow
>> and copy/paste safe.
>>
>> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
>> Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
>> ---
>>   drivers/staging/media/tegra-vde/iommu.c | 4 ++--
>>   1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/staging/media/tegra-vde/iommu.c
>> b/drivers/staging/media/tegra-vde/iommu.c index
>> 6af863d92123..adf8dc7ee25c 100644 ---
>> a/drivers/staging/media/tegra-vde/iommu.c +++
>> b/drivers/staging/media/tegra-vde/iommu.c @@ -36,8 +36,8 @@ int
>> tegra_vde_iommu_map(struct tegra_vde *vde,
>>   	addr = iova_dma_addr(&vde->iova, iova);
>>   
>> -	size = iommu_map_sg(vde->domain, addr, sgt->sgl, sgt->nents,
>> -			    IOMMU_READ | IOMMU_WRITE);
>> +	size = iommu_map_sgtable(vde->domain, addr, sgt,
>> +				 IOMMU_READ | IOMMU_WRITE);
>>   	if (!size) {
>>   		__free_iova(&vde->iova, iova);
>>   		return -ENXIO;
> Ahh, I saw the build failure report. You're changing the DMA API in
> this series, while DMA API isn't used by this driver, it uses IOMMU
> API. Hence there is no need to touch this code. Similar problem in the
> host1x driver patch.

The issue is caused by the lack of iommu_map_sgtable() stub when no 
IOMMU support is configured. I've posted a patch for this:

https://lore.kernel.org/lkml/20200630081756.18526-1-m.szyprowski@samsung.com/

The patch for this driver is fine, we have to wait until the above fix 
gets merged and then it can be applied during the next release cycle.

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

Re: [PATCH v7 31/36] staging: tegra-vde: fix common struct sg_table related issues

[Dmitry Osipenko]

30.06.2020 13:07, Marek Szyprowski пишет:
> On 21.06.2020 06:00, Dmitry Osipenko wrote:
>> В Fri, 19 Jun 2020 12:36:31 +0200
>> Marek Szyprowski <m.szyprowski@samsung.com> пишет:
>>
>>> The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg()
>>> function returns the number of the created entries in the DMA address
>>> space. However the subsequent calls to the
>>> dma_sync_sg_for_{device,cpu}() and dma_unmap_sg must be called with
>>> the original number of the entries passed to the dma_map_sg().
>>>
>>> struct sg_table is a common structure used for describing a
>>> non-contiguous memory buffer, used commonly in the DRM and graphics
>>> subsystems. It consists of a scatterlist with memory pages and DMA
>>> addresses (sgl entry), as well as the number of scatterlist entries:
>>> CPU pages (orig_nents entry) and DMA mapped pages (nents entry).
>>>
>>> It turned out that it was a common mistake to misuse nents and
>>> orig_nents entries, calling DMA-mapping functions with a wrong number
>>> of entries or ignoring the number of mapped entries returned by the
>>> dma_map_sg() function.
>>>
>>> To avoid such issues, lets use a common dma-mapping wrappers operating
>>> directly on the struct sg_table objects and use scatterlist page
>>> iterators where possible. This, almost always, hides references to the
>>> nents and orig_nents entries, making the code robust, easier to follow
>>> and copy/paste safe.
>>>
>>> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
>>> Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
>>> ---
>>>   drivers/staging/media/tegra-vde/iommu.c | 4 ++--
>>>   1 file changed, 2 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/staging/media/tegra-vde/iommu.c
>>> b/drivers/staging/media/tegra-vde/iommu.c index
>>> 6af863d92123..adf8dc7ee25c 100644 ---
>>> a/drivers/staging/media/tegra-vde/iommu.c +++
>>> b/drivers/staging/media/tegra-vde/iommu.c @@ -36,8 +36,8 @@ int
>>> tegra_vde_iommu_map(struct tegra_vde *vde,
>>>   	addr = iova_dma_addr(&vde->iova, iova);
>>>   
>>> -	size = iommu_map_sg(vde->domain, addr, sgt->sgl, sgt->nents,
>>> -			    IOMMU_READ | IOMMU_WRITE);
>>> +	size = iommu_map_sgtable(vde->domain, addr, sgt,
>>> +				 IOMMU_READ | IOMMU_WRITE);
>>>   	if (!size) {
>>>   		__free_iova(&vde->iova, iova);
>>>   		return -ENXIO;
>> Ahh, I saw the build failure report. You're changing the DMA API in
>> this series, while DMA API isn't used by this driver, it uses IOMMU
>> API. Hence there is no need to touch this code. Similar problem in the
>> host1x driver patch.
> 
> The issue is caused by the lack of iommu_map_sgtable() stub when no 
> IOMMU support is configured. I've posted a patch for this:
> 
> https://lore.kernel.org/lkml/20200630081756.18526-1-m.szyprowski@samsung.com/
> 
> The patch for this driver is fine, we have to wait until the above fix 
> gets merged and then it can be applied during the next release cycle.

Thank you for the clarification!

[PATCH v7 35/36] media: pci: fix common ALSA DMA-mapping related codes

[Marek Szyprowski]

The Documentation/DMA-API-HOWTO.txt states that dma_map_sg returns the
numer of the created entries in the DMA address space. However the
subsequent calls to dma_sync_sg_for_{device,cpu} and dma_unmap_sg must be
called with the original number of entries passed to dma_map_sg. The
sg_table->nents in turn holds the result of the dma_map_sg call as stated
in include/linux/scatterlist.h. Adapt the code to obey those rules.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/media/pci/cx23885/cx23885-alsa.c | 2 +-
 drivers/media/pci/cx25821/cx25821-alsa.c | 2 +-
 drivers/media/pci/cx88/cx88-alsa.c       | 2 +-
 drivers/media/pci/saa7134/saa7134-alsa.c | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/media/pci/cx23885/cx23885-alsa.c b/drivers/media/pci/cx23885/cx23885-alsa.c
index df44ed7393a0..3f366e4e4685 100644
--- a/drivers/media/pci/cx23885/cx23885-alsa.c
+++ b/drivers/media/pci/cx23885/cx23885-alsa.c
@@ -129,7 +129,7 @@ static int cx23885_alsa_dma_unmap(struct cx23885_audio_dev *dev)
 	if (!buf->sglen)
 		return 0;
 
-	dma_unmap_sg(&dev->pci->dev, buf->sglist, buf->sglen, PCI_DMA_FROMDEVICE);
+	dma_unmap_sg(&dev->pci->dev, buf->sglist, buf->nr_pages, PCI_DMA_FROMDEVICE);
 	buf->sglen = 0;
 	return 0;
 }
diff --git a/drivers/media/pci/cx25821/cx25821-alsa.c b/drivers/media/pci/cx25821/cx25821-alsa.c
index 301616426d8a..c40304d33776 100644
--- a/drivers/media/pci/cx25821/cx25821-alsa.c
+++ b/drivers/media/pci/cx25821/cx25821-alsa.c
@@ -193,7 +193,7 @@ static int cx25821_alsa_dma_unmap(struct cx25821_audio_dev *dev)
 	if (!buf->sglen)
 		return 0;
 
-	dma_unmap_sg(&dev->pci->dev, buf->sglist, buf->sglen, PCI_DMA_FROMDEVICE);
+	dma_unmap_sg(&dev->pci->dev, buf->sglist, buf->nr_pages, PCI_DMA_FROMDEVICE);
 	buf->sglen = 0;
 	return 0;
 }
diff --git a/drivers/media/pci/cx88/cx88-alsa.c b/drivers/media/pci/cx88/cx88-alsa.c
index 7d7aceecc985..3c6fe6ceb0b7 100644
--- a/drivers/media/pci/cx88/cx88-alsa.c
+++ b/drivers/media/pci/cx88/cx88-alsa.c
@@ -332,7 +332,7 @@ static int cx88_alsa_dma_unmap(struct cx88_audio_dev *dev)
 	if (!buf->sglen)
 		return 0;
 
-	dma_unmap_sg(&dev->pci->dev, buf->sglist, buf->sglen,
+	dma_unmap_sg(&dev->pci->dev, buf->sglist, buf->nr_pages,
 		     PCI_DMA_FROMDEVICE);
 	buf->sglen = 0;
 	return 0;
diff --git a/drivers/media/pci/saa7134/saa7134-alsa.c b/drivers/media/pci/saa7134/saa7134-alsa.c
index 544ca57eee75..398c47ff473d 100644
--- a/drivers/media/pci/saa7134/saa7134-alsa.c
+++ b/drivers/media/pci/saa7134/saa7134-alsa.c
@@ -313,7 +313,7 @@ static int saa7134_alsa_dma_unmap(struct saa7134_dev *dev)
 	if (!dma->sglen)
 		return 0;
 
-	dma_unmap_sg(&dev->pci->dev, dma->sglist, dma->sglen, PCI_DMA_FROMDEVICE);
+	dma_unmap_sg(&dev->pci->dev, dma->sglist, dma->nr_pages, PCI_DMA_FROMDEVICE);
 	dma->sglen = 0;
 	return 0;
 }
-- 
2.17.1

[PATCH v7 36/36] videobuf2: use sgtable-based scatterlist wrappers

[Marek Szyprowski]

Use recently introduced common wrappers operating directly on the struct
sg_table objects and scatterlist page iterators to make the code a bit
more compact, robust, easier to follow and copy/paste safe.

No functional change, because the code already properly did all the
scaterlist related calls.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 .../common/videobuf2/videobuf2-dma-contig.c   | 34 ++++++++-----------
 .../media/common/videobuf2/videobuf2-dma-sg.c | 32 +++++++----------
 .../common/videobuf2/videobuf2-vmalloc.c      | 12 +++----
 3 files changed, 31 insertions(+), 47 deletions(-)

diff --git a/drivers/media/common/videobuf2/videobuf2-dma-contig.c b/drivers/media/common/videobuf2/videobuf2-dma-contig.c
index f4b4a7c135eb..0a16a85f0284 100644
--- a/drivers/media/common/videobuf2/videobuf2-dma-contig.c
+++ b/drivers/media/common/videobuf2/videobuf2-dma-contig.c
@@ -53,10 +53,10 @@ static unsigned long vb2_dc_get_contiguous_size(struct sg_table *sgt)
 	unsigned int i;
 	unsigned long size = 0;
 
-	for_each_sg(sgt->sgl, s, sgt->nents, i) {
+	for_each_sgtable_dma_sg(sgt, s, i) {
 		if (sg_dma_address(s) != expected)
 			break;
-		expected = sg_dma_address(s) + sg_dma_len(s);
+		expected += sg_dma_len(s);
 		size += sg_dma_len(s);
 	}
 	return size;
@@ -99,8 +99,7 @@ static void vb2_dc_prepare(void *buf_priv)
 	if (!sgt || buf->db_attach)
 		return;
 
-	dma_sync_sg_for_device(buf->dev, sgt->sgl, sgt->orig_nents,
-			       buf->dma_dir);
+	dma_sync_sgtable_for_device(buf->dev, sgt, buf->dma_dir);
 }
 
 static void vb2_dc_finish(void *buf_priv)
@@ -112,7 +111,7 @@ static void vb2_dc_finish(void *buf_priv)
 	if (!sgt || buf->db_attach)
 		return;
 
-	dma_sync_sg_for_cpu(buf->dev, sgt->sgl, sgt->orig_nents, buf->dma_dir);
+	dma_sync_sgtable_for_cpu(buf->dev, sgt, buf->dma_dir);
 }
 
 /*********************************************/
@@ -273,8 +272,8 @@ static void vb2_dc_dmabuf_ops_detach(struct dma_buf *dbuf,
 		 * memory locations do not require any explicit cache
 		 * maintenance prior or after being used by the device.
 		 */
-		dma_unmap_sg_attrs(db_attach->dev, sgt->sgl, sgt->orig_nents,
-				   attach->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
+		dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir,
+				  DMA_ATTR_SKIP_CPU_SYNC);
 	sg_free_table(sgt);
 	kfree(attach);
 	db_attach->priv = NULL;
@@ -299,8 +298,8 @@ static struct sg_table *vb2_dc_dmabuf_ops_map(
 
 	/* release any previous cache */
 	if (attach->dma_dir != DMA_NONE) {
-		dma_unmap_sg_attrs(db_attach->dev, sgt->sgl, sgt->orig_nents,
-				   attach->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
+		dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir,
+				  DMA_ATTR_SKIP_CPU_SYNC);
 		attach->dma_dir = DMA_NONE;
 	}
 
@@ -308,9 +307,8 @@ static struct sg_table *vb2_dc_dmabuf_ops_map(
 	 * mapping to the client with new direction, no cache sync
 	 * required see comment in vb2_dc_dmabuf_ops_detach()
 	 */
-	sgt->nents = dma_map_sg_attrs(db_attach->dev, sgt->sgl, sgt->orig_nents,
-				      dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
-	if (!sgt->nents) {
+	if (dma_map_sgtable(db_attach->dev, sgt, dma_dir,
+			    DMA_ATTR_SKIP_CPU_SYNC)) {
 		pr_err("failed to map scatterlist\n");
 		mutex_unlock(lock);
 		return ERR_PTR(-EIO);
@@ -423,8 +421,8 @@ static void vb2_dc_put_userptr(void *buf_priv)
 		 * No need to sync to CPU, it's already synced to the CPU
 		 * since the finish() memop will have been called before this.
 		 */
-		dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
-				   buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
+		dma_unmap_sgtable(buf->dev, sgt, buf->dma_dir,
+				  DMA_ATTR_SKIP_CPU_SYNC);
 		pages = frame_vector_pages(buf->vec);
 		/* sgt should exist only if vector contains pages... */
 		BUG_ON(IS_ERR(pages));
@@ -521,9 +519,8 @@ static void *vb2_dc_get_userptr(struct device *dev, unsigned long vaddr,
 	 * No need to sync to the device, this will happen later when the
 	 * prepare() memop is called.
 	 */
-	sgt->nents = dma_map_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
-				      buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
-	if (sgt->nents <= 0) {
+	if (dma_map_sgtable(buf->dev, sgt, buf->dma_dir,
+			    DMA_ATTR_SKIP_CPU_SYNC)) {
 		pr_err("failed to map scatterlist\n");
 		ret = -EIO;
 		goto fail_sgt_init;
@@ -545,8 +542,7 @@ static void *vb2_dc_get_userptr(struct device *dev, unsigned long vaddr,
 	return buf;
 
 fail_map_sg:
-	dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
-			   buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
+	dma_unmap_sgtable(buf->dev, sgt, buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
 
 fail_sgt_init:
 	sg_free_table(sgt);
diff --git a/drivers/media/common/videobuf2/videobuf2-dma-sg.c b/drivers/media/common/videobuf2/videobuf2-dma-sg.c
index 92072a08af25..08c40311eea0 100644
--- a/drivers/media/common/videobuf2/videobuf2-dma-sg.c
+++ b/drivers/media/common/videobuf2/videobuf2-dma-sg.c
@@ -142,9 +142,8 @@ static void *vb2_dma_sg_alloc(struct device *dev, unsigned long dma_attrs,
 	 * No need to sync to the device, this will happen later when the
 	 * prepare() memop is called.
 	 */
-	sgt->nents = dma_map_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
-				      buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
-	if (!sgt->nents)
+	if (dma_map_sgtable(buf->dev, sgt, buf->dma_dir,
+			    DMA_ATTR_SKIP_CPU_SYNC))
 		goto fail_map;
 
 	buf->handler.refcount = &buf->refcount;
@@ -180,8 +179,8 @@ static void vb2_dma_sg_put(void *buf_priv)
 	if (refcount_dec_and_test(&buf->refcount)) {
 		dprintk(1, "%s: Freeing buffer of %d pages\n", __func__,
 			buf->num_pages);
-		dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
-				   buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
+		dma_unmap_sgtable(buf->dev, sgt, buf->dma_dir,
+				  DMA_ATTR_SKIP_CPU_SYNC);
 		if (buf->vaddr)
 			vm_unmap_ram(buf->vaddr, buf->num_pages);
 		sg_free_table(buf->dma_sgt);
@@ -202,8 +201,7 @@ static void vb2_dma_sg_prepare(void *buf_priv)
 	if (buf->db_attach)
 		return;
 
-	dma_sync_sg_for_device(buf->dev, sgt->sgl, sgt->orig_nents,
-			       buf->dma_dir);
+	dma_sync_sgtable_for_device(buf->dev, sgt, buf->dma_dir);
 }
 
 static void vb2_dma_sg_finish(void *buf_priv)
@@ -215,7 +213,7 @@ static void vb2_dma_sg_finish(void *buf_priv)
 	if (buf->db_attach)
 		return;
 
-	dma_sync_sg_for_cpu(buf->dev, sgt->sgl, sgt->orig_nents, buf->dma_dir);
+	dma_sync_sgtable_for_cpu(buf->dev, sgt, buf->dma_dir);
 }
 
 static void *vb2_dma_sg_get_userptr(struct device *dev, unsigned long vaddr,
@@ -258,9 +256,8 @@ static void *vb2_dma_sg_get_userptr(struct device *dev, unsigned long vaddr,
 	 * No need to sync to the device, this will happen later when the
 	 * prepare() memop is called.
 	 */
-	sgt->nents = dma_map_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
-				      buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
-	if (!sgt->nents)
+	if (dma_map_sgtable(buf->dev, sgt, buf->dma_dir,
+			    DMA_ATTR_SKIP_CPU_SYNC))
 		goto userptr_fail_map;
 
 	return buf;
@@ -286,8 +283,7 @@ static void vb2_dma_sg_put_userptr(void *buf_priv)
 
 	dprintk(1, "%s: Releasing userspace buffer of %d pages\n",
 	       __func__, buf->num_pages);
-	dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents, buf->dma_dir,
-			   DMA_ATTR_SKIP_CPU_SYNC);
+	dma_unmap_sgtable(buf->dev, sgt, buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
 	if (buf->vaddr)
 		vm_unmap_ram(buf->vaddr, buf->num_pages);
 	sg_free_table(buf->dma_sgt);
@@ -410,8 +406,7 @@ static void vb2_dma_sg_dmabuf_ops_detach(struct dma_buf *dbuf,
 
 	/* release the scatterlist cache */
 	if (attach->dma_dir != DMA_NONE)
-		dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
-			attach->dma_dir);
+		dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir, 0);
 	sg_free_table(sgt);
 	kfree(attach);
 	db_attach->priv = NULL;
@@ -436,15 +431,12 @@ static struct sg_table *vb2_dma_sg_dmabuf_ops_map(
 
 	/* release any previous cache */
 	if (attach->dma_dir != DMA_NONE) {
-		dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
-			attach->dma_dir);
+		dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir, 0);
 		attach->dma_dir = DMA_NONE;
 	}
 
 	/* mapping to the client with new direction */
-	sgt->nents = dma_map_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
-				dma_dir);
-	if (!sgt->nents) {
+	if (dma_map_sgtable(db_attach->dev, sgt, dma_dir, 0)) {
 		pr_err("failed to map scatterlist\n");
 		mutex_unlock(lock);
 		return ERR_PTR(-EIO);
diff --git a/drivers/media/common/videobuf2/videobuf2-vmalloc.c b/drivers/media/common/videobuf2/videobuf2-vmalloc.c
index c66fda4a65e4..bf5ac63a5742 100644
--- a/drivers/media/common/videobuf2/videobuf2-vmalloc.c
+++ b/drivers/media/common/videobuf2/videobuf2-vmalloc.c
@@ -229,7 +229,7 @@ static int vb2_vmalloc_dmabuf_ops_attach(struct dma_buf *dbuf,
 		kfree(attach);
 		return ret;
 	}
-	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+	for_each_sgtable_sg(sgt, sg, i) {
 		struct page *page = vmalloc_to_page(vaddr);
 
 		if (!page) {
@@ -259,8 +259,7 @@ static void vb2_vmalloc_dmabuf_ops_detach(struct dma_buf *dbuf,
 
 	/* release the scatterlist cache */
 	if (attach->dma_dir != DMA_NONE)
-		dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
-			attach->dma_dir);
+		dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir, 0);
 	sg_free_table(sgt);
 	kfree(attach);
 	db_attach->priv = NULL;
@@ -285,15 +284,12 @@ static struct sg_table *vb2_vmalloc_dmabuf_ops_map(
 
 	/* release any previous cache */
 	if (attach->dma_dir != DMA_NONE) {
-		dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
-			attach->dma_dir);
+		dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir, 0);
 		attach->dma_dir = DMA_NONE;
 	}
 
 	/* mapping to the client with new direction */
-	sgt->nents = dma_map_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
-				dma_dir);
-	if (!sgt->nents) {
+	if (dma_map_sgtable(db_attach->dev, sgt, dma_dir, 0)) {
 		pr_err("failed to map scatterlist\n");
 		mutex_unlock(lock);
 		return ERR_PTR(-EIO);
-- 
2.17.1

[PATCH v8] videobuf2: use sgtable-based scatterlist wrappers

[Marek Szyprowski]

Use recently introduced common wrappers operating directly on the struct
sg_table objects and scatterlist page iterators to make the code a bit
more compact, robust, easier to follow and copy/paste safe.

No functional change, because the code already properly did all the
scaterlist related calls.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
v8:
- rebased after recent changes in the code
---
 .../common/videobuf2/videobuf2-dma-contig.c   | 34 ++++++++-----------
 .../media/common/videobuf2/videobuf2-dma-sg.c | 32 +++++++----------
 .../common/videobuf2/videobuf2-vmalloc.c      | 12 +++----
 3 files changed, 31 insertions(+), 47 deletions(-)

diff --git a/drivers/media/common/videobuf2/videobuf2-dma-contig.c b/drivers/media/common/videobuf2/videobuf2-dma-contig.c
index ec3446cc45b8..1b242d844dde 100644
--- a/drivers/media/common/videobuf2/videobuf2-dma-contig.c
+++ b/drivers/media/common/videobuf2/videobuf2-dma-contig.c
@@ -58,10 +58,10 @@ static unsigned long vb2_dc_get_contiguous_size(struct sg_table *sgt)
 	unsigned int i;
 	unsigned long size = 0;
 
-	for_each_sg(sgt->sgl, s, sgt->nents, i) {
+	for_each_sgtable_dma_sg(sgt, s, i) {
 		if (sg_dma_address(s) != expected)
 			break;
-		expected = sg_dma_address(s) + sg_dma_len(s);
+		expected += sg_dma_len(s);
 		size += sg_dma_len(s);
 	}
 	return size;
@@ -103,8 +103,7 @@ static void vb2_dc_prepare(void *buf_priv)
 	if (!sgt)
 		return;
 
-	dma_sync_sg_for_device(buf->dev, sgt->sgl, sgt->orig_nents,
-			       buf->dma_dir);
+	dma_sync_sgtable_for_device(buf->dev, sgt, buf->dma_dir);
 }
 
 static void vb2_dc_finish(void *buf_priv)
@@ -115,7 +114,7 @@ static void vb2_dc_finish(void *buf_priv)
 	if (!sgt)
 		return;
 
-	dma_sync_sg_for_cpu(buf->dev, sgt->sgl, sgt->orig_nents, buf->dma_dir);
+	dma_sync_sgtable_for_cpu(buf->dev, sgt, buf->dma_dir);
 }
 
 /*********************************************/
@@ -275,8 +274,8 @@ static void vb2_dc_dmabuf_ops_detach(struct dma_buf *dbuf,
 		 * memory locations do not require any explicit cache
 		 * maintenance prior or after being used by the device.
 		 */
-		dma_unmap_sg_attrs(db_attach->dev, sgt->sgl, sgt->orig_nents,
-				   attach->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
+		dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir,
+				  DMA_ATTR_SKIP_CPU_SYNC);
 	sg_free_table(sgt);
 	kfree(attach);
 	db_attach->priv = NULL;
@@ -301,8 +300,8 @@ static struct sg_table *vb2_dc_dmabuf_ops_map(
 
 	/* release any previous cache */
 	if (attach->dma_dir != DMA_NONE) {
-		dma_unmap_sg_attrs(db_attach->dev, sgt->sgl, sgt->orig_nents,
-				   attach->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
+		dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir,
+				  DMA_ATTR_SKIP_CPU_SYNC);
 		attach->dma_dir = DMA_NONE;
 	}
 
@@ -310,9 +309,8 @@ static struct sg_table *vb2_dc_dmabuf_ops_map(
 	 * mapping to the client with new direction, no cache sync
 	 * required see comment in vb2_dc_dmabuf_ops_detach()
 	 */
-	sgt->nents = dma_map_sg_attrs(db_attach->dev, sgt->sgl, sgt->orig_nents,
-				      dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
-	if (!sgt->nents) {
+	if (dma_map_sgtable(db_attach->dev, sgt, dma_dir,
+			    DMA_ATTR_SKIP_CPU_SYNC)) {
 		pr_err("failed to map scatterlist\n");
 		mutex_unlock(lock);
 		return ERR_PTR(-EIO);
@@ -455,8 +453,8 @@ static void vb2_dc_put_userptr(void *buf_priv)
 		 * No need to sync to CPU, it's already synced to the CPU
 		 * since the finish() memop will have been called before this.
 		 */
-		dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
-				   buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
+		dma_unmap_sgtable(buf->dev, sgt, buf->dma_dir,
+				  DMA_ATTR_SKIP_CPU_SYNC);
 		pages = frame_vector_pages(buf->vec);
 		/* sgt should exist only if vector contains pages... */
 		BUG_ON(IS_ERR(pages));
@@ -553,9 +551,8 @@ static void *vb2_dc_get_userptr(struct device *dev, unsigned long vaddr,
 	 * No need to sync to the device, this will happen later when the
 	 * prepare() memop is called.
 	 */
-	sgt->nents = dma_map_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
-				      buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
-	if (sgt->nents <= 0) {
+	if (dma_map_sgtable(buf->dev, sgt, buf->dma_dir,
+			    DMA_ATTR_SKIP_CPU_SYNC)) {
 		pr_err("failed to map scatterlist\n");
 		ret = -EIO;
 		goto fail_sgt_init;
@@ -577,8 +574,7 @@ static void *vb2_dc_get_userptr(struct device *dev, unsigned long vaddr,
 	return buf;
 
 fail_map_sg:
-	dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
-			   buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
+	dma_unmap_sgtable(buf->dev, sgt, buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
 
 fail_sgt_init:
 	sg_free_table(sgt);
diff --git a/drivers/media/common/videobuf2/videobuf2-dma-sg.c b/drivers/media/common/videobuf2/videobuf2-dma-sg.c
index 0a40e00f0d7e..0dd3b19025e0 100644
--- a/drivers/media/common/videobuf2/videobuf2-dma-sg.c
+++ b/drivers/media/common/videobuf2/videobuf2-dma-sg.c
@@ -148,9 +148,8 @@ static void *vb2_dma_sg_alloc(struct device *dev, unsigned long dma_attrs,
 	 * No need to sync to the device, this will happen later when the
 	 * prepare() memop is called.
 	 */
-	sgt->nents = dma_map_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
-				      buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
-	if (!sgt->nents)
+	if (dma_map_sgtable(buf->dev, sgt, buf->dma_dir,
+			    DMA_ATTR_SKIP_CPU_SYNC))
 		goto fail_map;
 
 	buf->handler.refcount = &buf->refcount;
@@ -186,8 +185,8 @@ static void vb2_dma_sg_put(void *buf_priv)
 	if (refcount_dec_and_test(&buf->refcount)) {
 		dprintk(1, "%s: Freeing buffer of %d pages\n", __func__,
 			buf->num_pages);
-		dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
-				   buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
+		dma_unmap_sgtable(buf->dev, sgt, buf->dma_dir,
+				  DMA_ATTR_SKIP_CPU_SYNC);
 		if (buf->vaddr)
 			vm_unmap_ram(buf->vaddr, buf->num_pages);
 		sg_free_table(buf->dma_sgt);
@@ -204,8 +203,7 @@ static void vb2_dma_sg_prepare(void *buf_priv)
 	struct vb2_dma_sg_buf *buf = buf_priv;
 	struct sg_table *sgt = buf->dma_sgt;
 
-	dma_sync_sg_for_device(buf->dev, sgt->sgl, sgt->orig_nents,
-			       buf->dma_dir);
+	dma_sync_sgtable_for_device(buf->dev, sgt, buf->dma_dir);
 }
 
 static void vb2_dma_sg_finish(void *buf_priv)
@@ -213,7 +211,7 @@ static void vb2_dma_sg_finish(void *buf_priv)
 	struct vb2_dma_sg_buf *buf = buf_priv;
 	struct sg_table *sgt = buf->dma_sgt;
 
-	dma_sync_sg_for_cpu(buf->dev, sgt->sgl, sgt->orig_nents, buf->dma_dir);
+	dma_sync_sgtable_for_cpu(buf->dev, sgt, buf->dma_dir);
 }
 
 static void *vb2_dma_sg_get_userptr(struct device *dev, unsigned long vaddr,
@@ -256,9 +254,8 @@ static void *vb2_dma_sg_get_userptr(struct device *dev, unsigned long vaddr,
 	 * No need to sync to the device, this will happen later when the
 	 * prepare() memop is called.
 	 */
-	sgt->nents = dma_map_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
-				      buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
-	if (!sgt->nents)
+	if (dma_map_sgtable(buf->dev, sgt, buf->dma_dir,
+			    DMA_ATTR_SKIP_CPU_SYNC))
 		goto userptr_fail_map;
 
 	return buf;
@@ -284,8 +281,7 @@ static void vb2_dma_sg_put_userptr(void *buf_priv)
 
 	dprintk(1, "%s: Releasing userspace buffer of %d pages\n",
 	       __func__, buf->num_pages);
-	dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents, buf->dma_dir,
-			   DMA_ATTR_SKIP_CPU_SYNC);
+	dma_unmap_sgtable(buf->dev, sgt, buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
 	if (buf->vaddr)
 		vm_unmap_ram(buf->vaddr, buf->num_pages);
 	sg_free_table(buf->dma_sgt);
@@ -408,8 +404,7 @@ static void vb2_dma_sg_dmabuf_ops_detach(struct dma_buf *dbuf,
 
 	/* release the scatterlist cache */
 	if (attach->dma_dir != DMA_NONE)
-		dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
-			attach->dma_dir);
+		dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir, 0);
 	sg_free_table(sgt);
 	kfree(attach);
 	db_attach->priv = NULL;
@@ -434,15 +429,12 @@ static struct sg_table *vb2_dma_sg_dmabuf_ops_map(
 
 	/* release any previous cache */
 	if (attach->dma_dir != DMA_NONE) {
-		dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
-			attach->dma_dir);
+		dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir, 0);
 		attach->dma_dir = DMA_NONE;
 	}
 
 	/* mapping to the client with new direction */
-	sgt->nents = dma_map_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
-				dma_dir);
-	if (!sgt->nents) {
+	if (dma_map_sgtable(db_attach->dev, sgt, dma_dir, 0)) {
 		pr_err("failed to map scatterlist\n");
 		mutex_unlock(lock);
 		return ERR_PTR(-EIO);
diff --git a/drivers/media/common/videobuf2/videobuf2-vmalloc.c b/drivers/media/common/videobuf2/videobuf2-vmalloc.c
index c66fda4a65e4..bf5ac63a5742 100644
--- a/drivers/media/common/videobuf2/videobuf2-vmalloc.c
+++ b/drivers/media/common/videobuf2/videobuf2-vmalloc.c
@@ -229,7 +229,7 @@ static int vb2_vmalloc_dmabuf_ops_attach(struct dma_buf *dbuf,
 		kfree(attach);
 		return ret;
 	}
-	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+	for_each_sgtable_sg(sgt, sg, i) {
 		struct page *page = vmalloc_to_page(vaddr);
 
 		if (!page) {
@@ -259,8 +259,7 @@ static void vb2_vmalloc_dmabuf_ops_detach(struct dma_buf *dbuf,
 
 	/* release the scatterlist cache */
 	if (attach->dma_dir != DMA_NONE)
-		dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
-			attach->dma_dir);
+		dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir, 0);
 	sg_free_table(sgt);
 	kfree(attach);
 	db_attach->priv = NULL;
@@ -285,15 +284,12 @@ static struct sg_table *vb2_vmalloc_dmabuf_ops_map(
 
 	/* release any previous cache */
 	if (attach->dma_dir != DMA_NONE) {
-		dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
-			attach->dma_dir);
+		dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir, 0);
 		attach->dma_dir = DMA_NONE;
 	}
 
 	/* mapping to the client with new direction */
-	sgt->nents = dma_map_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
-				dma_dir);
-	if (!sgt->nents) {
+	if (dma_map_sgtable(db_attach->dev, sgt, dma_dir, 0)) {
 		pr_err("failed to map scatterlist\n");
 		mutex_unlock(lock);
 		return ERR_PTR(-EIO);
-- 
2.17.1