public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: Jammy Huang <jammy_huang@aspeedtech.com>
To: <eajames@linux.ibm.com>, <mchehab@kernel.org>, <joel@jms.id.au>,
	<andrew@aj.id.au>, <linux-media@vger.kernel.org>,
	<openbmc@lists.ozlabs.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 1/4] media: aspeed: Correct value for h-total-pixels
Date: Fri, 17 Dec 2021 17:54:00 +0800	[thread overview]
Message-ID: <20211217095403.2618-2-jammy_huang@aspeedtech.com> (raw)
In-Reply-To: <20211217095403.2618-1-jammy_huang@aspeedtech.com>

Previous reg-field, 0x98[11:0], stands for the period of the detected
hsync signal.
Use the correct reg, 0xa0, to get h-total in pixels.

Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
---
 drivers/media/platform/aspeed-video.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index b388bc56ce81..d5f77b205175 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -166,7 +166,7 @@
 #define  VE_SRC_TB_EDGE_DET_BOT		GENMASK(28, VE_SRC_TB_EDGE_DET_BOT_SHF)
 
 #define VE_MODE_DETECT_STATUS		0x098
-#define  VE_MODE_DETECT_H_PIXELS	GENMASK(11, 0)
+#define  VE_MODE_DETECT_H_PERIOD	GENMASK(11, 0)
 #define  VE_MODE_DETECT_V_LINES_SHF	16
 #define  VE_MODE_DETECT_V_LINES		GENMASK(27, VE_MODE_DETECT_V_LINES_SHF)
 #define  VE_MODE_DETECT_STATUS_VSYNC	BIT(28)
@@ -177,6 +177,8 @@
 #define  VE_SYNC_STATUS_VSYNC_SHF	16
 #define  VE_SYNC_STATUS_VSYNC		GENMASK(27, VE_SYNC_STATUS_VSYNC_SHF)
 
+#define VE_H_TOTAL_PIXELS		0x0A0
+
 #define VE_INTERRUPT_CTRL		0x304
 #define VE_INTERRUPT_STATUS		0x308
 #define  VE_INTERRUPT_MODE_DETECT_WD	BIT(0)
@@ -938,6 +940,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 	u32 src_lr_edge;
 	u32 src_tb_edge;
 	u32 sync;
+	u32 htotal;
 	struct v4l2_bt_timings *det = &video->detected_timings;
 
 	det->width = MIN_WIDTH;
@@ -983,6 +986,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 		src_tb_edge = aspeed_video_read(video, VE_SRC_TB_EDGE_DET);
 		mds = aspeed_video_read(video, VE_MODE_DETECT_STATUS);
 		sync = aspeed_video_read(video, VE_SYNC_STATUS);
+		htotal = aspeed_video_read(video, VE_H_TOTAL_PIXELS);
 
 		video->frame_bottom = (src_tb_edge & VE_SRC_TB_EDGE_DET_BOT) >>
 			VE_SRC_TB_EDGE_DET_BOT_SHF;
@@ -999,8 +1003,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 			VE_SRC_LR_EDGE_DET_RT_SHF;
 		video->frame_left = src_lr_edge & VE_SRC_LR_EDGE_DET_LEFT;
 		det->hfrontporch = video->frame_left;
-		det->hbackporch = (mds & VE_MODE_DETECT_H_PIXELS) -
-			video->frame_right;
+		det->hbackporch = htotal - video->frame_right;
 		det->hsync = sync & VE_SYNC_STATUS_HSYNC;
 		if (video->frame_left > video->frame_right)
 			continue;
-- 
2.25.1


  reply	other threads:[~2021-12-17  9:54 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-17  9:53 [PATCH 0/4] Correct timing report Jammy Huang
2021-12-17  9:54 ` Jammy Huang [this message]
2021-12-22  0:54   ` [PATCH 1/4] media: aspeed: Correct value for h-total-pixels Joel Stanley
2021-12-17  9:54 ` [PATCH 2/4] media: aspeed: Use FIELD_GET to improve readability Jammy Huang
2021-12-22  0:59   ` Joel Stanley
2021-12-22  6:10     ` Jammy Huang
2021-12-17  9:54 ` [PATCH 3/4] media: aspeed: Correct values for detected timing Jammy Huang
2021-12-22  1:31   ` Joel Stanley
2021-12-22  6:11     ` Jammy Huang
2021-12-17  9:54 ` [PATCH 4/4] media: aspeed: Fix timing polarity incorrect Jammy Huang
2021-12-22  1:22   ` Joel Stanley
2021-12-22  6:10     ` Jammy Huang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211217095403.2618-2-jammy_huang@aspeedtech.com \
    --to=jammy_huang@aspeedtech.com \
    --cc=andrew@aj.id.au \
    --cc=eajames@linux.ibm.com \
    --cc=joel@jms.id.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=openbmc@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox