Linux Media Controller development
 help / color / mirror / Atom feed
From: Dan Carpenter <dan.carpenter@oracle.com>
To: ming.qian@nxp.com
Cc: linux-media@vger.kernel.org
Subject: [bug report] media: amphion: add vpu core driver
Date: Wed, 9 Mar 2022 13:43:37 +0300	[thread overview]
Message-ID: <20220309104337.GA29869@kili> (raw)

Hello Ming Qian,

The patch 9f599f351e86: "media: amphion: add vpu core driver" from
Feb 24, 2022, leads to the following Smatch static checker warning:

	drivers/media/platform/amphion/vpu_core.c:654 vpu_core_probe()
	warn: pm_runtime_get_sync() also returns 1 on success

drivers/media/platform/amphion/vpu_core.c
    577 static int vpu_core_probe(struct platform_device *pdev)
    578 {
    579         struct device *dev = &pdev->dev;
    580         struct vpu_core *core;
    581         struct vpu_dev *vpu = dev_get_drvdata(dev->parent);
    582         struct vpu_shared_addr *iface;
    583         u32 iface_data_size;
    584         int ret;
    585 
    586         dev_dbg(dev, "probe\n");
    587         if (!vpu)
    588                 return -EINVAL;
    589         core = devm_kzalloc(dev, sizeof(*core), GFP_KERNEL);
    590         if (!core)
    591                 return -ENOMEM;
    592 
    593         core->pdev = pdev;
    594         core->dev = dev;
    595         platform_set_drvdata(pdev, core);
    596         core->vpu = vpu;
    597         INIT_LIST_HEAD(&core->instances);
    598         mutex_init(&core->lock);
    599         mutex_init(&core->cmd_lock);
    600         init_completion(&core->cmp);
    601         init_waitqueue_head(&core->ack_wq);
    602         core->state = VPU_CORE_DEINIT;
    603 
    604         core->res = of_device_get_match_data(dev);
    605         if (!core->res)
    606                 return -ENODEV;
    607 
    608         core->type = core->res->type;
    609         core->id = of_alias_get_id(dev->of_node, "vpu_core");
    610         if (core->id < 0) {
    611                 dev_err(dev, "can't get vpu core id\n");
    612                 return core->id;
    613         }
    614         dev_info(core->dev, "[%d] = %s\n", core->id, vpu_core_type_desc(core->type));
    615         ret = vpu_core_parse_dt(core, dev->of_node);
    616         if (ret)
    617                 return ret;
    618 
    619         core->base = devm_platform_ioremap_resource(pdev, 0);
    620         if (IS_ERR(core->base))
    621                 return PTR_ERR(core->base);
    622 
    623         if (!vpu_iface_check_codec(core)) {
    624                 dev_err(core->dev, "is not supported\n");
    625                 return -EINVAL;
    626         }
    627 
    628         ret = vpu_mbox_init(core);
    629         if (ret)
    630                 return ret;
    631 
    632         iface = devm_kzalloc(dev, sizeof(*iface), GFP_KERNEL);
    633         if (!iface)
    634                 return -ENOMEM;
    635 
    636         iface_data_size = vpu_iface_get_data_size(core);
    637         if (iface_data_size) {
    638                 iface->priv = devm_kzalloc(dev, iface_data_size, GFP_KERNEL);
    639                 if (!iface->priv)
    640                         return -ENOMEM;
    641         }
    642 
    643         ret = vpu_iface_init(core, iface, &core->rpc, core->fw.phys);
    644         if (ret) {
    645                 dev_err(core->dev, "init iface fail, ret = %d\n", ret);
    646                 return ret;
    647         }
    648 
    649         vpu_iface_config_system(core, vpu->res->mreg_base, vpu->base);
    650         vpu_iface_set_log_buf(core, &core->log);
    651 
    652         pm_runtime_enable(dev);
    653         ret = pm_runtime_get_sync(dev);
--> 654         if (ret) {
                    ^^^
This isn't right.

    655                 pm_runtime_put_noidle(dev);
    656                 pm_runtime_set_suspended(dev);
    657                 goto err_runtime_disable;
    658         }

The documentation for pm_runtime_get_sync() suggests using
pm_runtime_resume_and_get() instead.  I think you can just do

	ret = pm_runtime_resume_and_get(dev);
	if (ret)
		goto err_runtime_disable;

    659 
    660         ret = vpu_core_register(dev->parent, core);
    661         if (ret)
    662                 goto err_core_register;
    663         core->parent = dev->parent;
    664 
    665         pm_runtime_put_sync(dev);
    666         vpu_core_create_dbgfs_file(core);
    667 
    668         return 0;
    669 
    670 err_core_register:
    671         pm_runtime_put_sync(dev);
    672 err_runtime_disable:
    673         pm_runtime_disable(dev);
    674 
    675         return ret;
    676 }

regards,
dan carpenter

             reply	other threads:[~2022-03-09 10:44 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-09 10:43 Dan Carpenter [this message]
2022-03-09 10:45 ` [bug report] media: amphion: add vpu core driver Dan Carpenter
2022-03-09 13:33 ` Hans Verkuil
2022-03-09 15:20   ` Dan Carpenter
2022-03-09 15:43     ` Hans Verkuil
2022-03-10  1:54 ` [EXT] " Ming Qian

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220309104337.GA29869@kili \
    --to=dan.carpenter@oracle.com \
    --cc=linux-media@vger.kernel.org \
    --cc=ming.qian@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox