From: Hans de Goede <hdegoede@redhat.com>
To: Sakari Ailus <sakari.ailus@linux.intel.com>,
Rui Miguel Silva <rmfrfs@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Kate Hsuan <hpa@redhat.com>,
Kieran Bingham <kieran.bingham@ideasonboard.com>,
linux-media@vger.kernel.org
Subject: [PATCH resend 3/4] media: hi556: Add support for external clock
Date: Mon, 15 Apr 2024 11:41:32 +0200 [thread overview]
Message-ID: <20240415094133.210580-4-hdegoede@redhat.com> (raw)
In-Reply-To: <20240415094133.210580-1-hdegoede@redhat.com>
On some ACPI platforms, such as Chromebooks the ACPI methods to
change the power-state (_PS0 and _PS3) fully take care of powering
on/off the sensor.
On other ACPI platforms, such as e.g. various HP models with IPU6 +
hi556 sensor, the sensor driver must control the sensor's clock itself.
Add support for having the driver control an optional clock.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/media/i2c/hi556.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/media/i2c/hi556.c b/drivers/media/i2c/hi556.c
index f5a39b83598b..b783e0f56687 100644
--- a/drivers/media/i2c/hi556.c
+++ b/drivers/media/i2c/hi556.c
@@ -3,6 +3,7 @@
#include <asm/unaligned.h>
#include <linux/acpi.h>
+#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
@@ -636,6 +637,7 @@ struct hi556 {
/* GPIOs, clocks, etc. */
struct gpio_desc *reset_gpio;
+ struct clk *clk;
/* Current mode */
const struct hi556_mode *cur_mode;
@@ -1286,6 +1288,7 @@ static int hi556_suspend(struct device *dev)
struct hi556 *hi556 = to_hi556(sd);
gpiod_set_value_cansleep(hi556->reset_gpio, 1);
+ clk_disable_unprepare(hi556->clk);
return 0;
}
@@ -1293,6 +1296,11 @@ static int hi556_resume(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
struct hi556 *hi556 = to_hi556(sd);
+ int ret;
+
+ ret = clk_prepare_enable(hi556->clk);
+ if (ret)
+ return ret;
gpiod_set_value_cansleep(hi556->reset_gpio, 0);
usleep_range(5000, 5500);
@@ -1324,6 +1332,11 @@ static int hi556_probe(struct i2c_client *client)
return dev_err_probe(&client->dev, PTR_ERR(hi556->reset_gpio),
"failed to get reset GPIO\n");
+ hi556->clk = devm_clk_get_optional(&client->dev, "clk");
+ if (IS_ERR(hi556->clk))
+ return dev_err_probe(&client->dev, PTR_ERR(hi556->clk),
+ "failed to get clock\n");
+
full_power = acpi_dev_state_d0(&client->dev);
if (full_power) {
/* Ensure non ACPI managed resources are enabled */
--
2.44.0
next prev parent reply other threads:[~2024-04-15 9:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-15 9:41 [PATCH resend 0/4] media: hi556: Add reset / clk / regulator support Hans de Goede
2024-04-15 9:41 ` [PATCH resend 1/4] media: hi556: Return -EPROBE_DEFER if no endpoint is found Hans de Goede
2024-04-15 11:25 ` Sakari Ailus
2024-04-15 9:41 ` [PATCH resend 2/4] media: hi556: Add support for reset GPIO Hans de Goede
2024-04-15 9:41 ` Hans de Goede [this message]
2024-04-15 9:41 ` [PATCH resend 4/4] media: hi556: Add support for avdd regulator Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240415094133.210580-4-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=hpa@redhat.com \
--cc=kieran.bingham@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=rmfrfs@gmail.com \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox