linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: Sakari Ailus <sakari.ailus@linux.intel.com>,
	Rui Miguel Silva <rmfrfs@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Kate Hsuan <hpa@redhat.com>,
	Kieran Bingham <kieran.bingham@ideasonboard.com>,
	linux-media@vger.kernel.org
Subject: [PATCH resend 4/4] media: hi556: Add support for avdd regulator
Date: Mon, 15 Apr 2024 11:41:33 +0200	[thread overview]
Message-ID: <20240415094133.210580-5-hdegoede@redhat.com> (raw)
In-Reply-To: <20240415094133.210580-1-hdegoede@redhat.com>

On some ACPI platforms, such as Chromebooks the ACPI methods to
change the power-state (_PS0 and _PS3) fully take care of powering
on/off the sensor.

On other ACPI platforms, such as e.g. various HP models with IPU6 +
hi556 sensor, the sensor driver must control the avdd regulator itself.

Add support for having the driver control the sensor's avdd regulator.
Note this relies on the regulator-core providing a dummy regulator
(which it does by default) on platforms where Linux is not aware of
the avdd regulator.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/media/i2c/hi556.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/media/i2c/hi556.c b/drivers/media/i2c/hi556.c
index b783e0f56687..5641c249d4b1 100644
--- a/drivers/media/i2c/hi556.c
+++ b/drivers/media/i2c/hi556.c
@@ -9,6 +9,7 @@
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-fwnode.h>
@@ -638,6 +639,7 @@ struct hi556 {
 	/* GPIOs, clocks, etc. */
 	struct gpio_desc *reset_gpio;
 	struct clk *clk;
+	struct regulator *avdd;
 
 	/* Current mode */
 	const struct hi556_mode *cur_mode;
@@ -1286,8 +1288,17 @@ static int hi556_suspend(struct device *dev)
 {
 	struct v4l2_subdev *sd = dev_get_drvdata(dev);
 	struct hi556 *hi556 = to_hi556(sd);
+	int ret;
 
 	gpiod_set_value_cansleep(hi556->reset_gpio, 1);
+
+	ret = regulator_disable(hi556->avdd);
+	if (ret) {
+		dev_err(dev, "failed to disable avdd: %d\n", ret);
+		gpiod_set_value_cansleep(hi556->reset_gpio, 0);
+		return ret;
+	}
+
 	clk_disable_unprepare(hi556->clk);
 	return 0;
 }
@@ -1302,6 +1313,13 @@ static int hi556_resume(struct device *dev)
 	if (ret)
 		return ret;
 
+	ret = regulator_enable(hi556->avdd);
+	if (ret) {
+		dev_err(dev, "failed to enable avdd: %d\n", ret);
+		clk_disable_unprepare(hi556->clk);
+		return ret;
+	}
+
 	gpiod_set_value_cansleep(hi556->reset_gpio, 0);
 	usleep_range(5000, 5500);
 	return 0;
@@ -1337,6 +1355,12 @@ static int hi556_probe(struct i2c_client *client)
 		return dev_err_probe(&client->dev, PTR_ERR(hi556->clk),
 				     "failed to get clock\n");
 
+	/* The regulator core will provide a "dummy" regulator if necessary */
+	hi556->avdd = devm_regulator_get(&client->dev, "avdd");
+	if (IS_ERR(hi556->avdd))
+		return dev_err_probe(&client->dev, PTR_ERR(hi556->avdd),
+				     "failed to get avdd regulator\n");
+
 	full_power = acpi_dev_state_d0(&client->dev);
 	if (full_power) {
 		/* Ensure non ACPI managed resources are enabled */
-- 
2.44.0


      parent reply	other threads:[~2024-04-15  9:41 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-15  9:41 [PATCH resend 0/4] media: hi556: Add reset / clk / regulator support Hans de Goede
2024-04-15  9:41 ` [PATCH resend 1/4] media: hi556: Return -EPROBE_DEFER if no endpoint is found Hans de Goede
2024-04-15 11:25   ` Sakari Ailus
2024-04-15  9:41 ` [PATCH resend 2/4] media: hi556: Add support for reset GPIO Hans de Goede
2024-04-15  9:41 ` [PATCH resend 3/4] media: hi556: Add support for external clock Hans de Goede
2024-04-15  9:41 ` Hans de Goede [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240415094133.210580-5-hdegoede@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=hpa@redhat.com \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=rmfrfs@gmail.com \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).