From: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
To: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>,
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>,
linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Subject: Re: [PATCH v2 04/11] media: rcar-csi2: Use the subdev active state
Date: Wed, 8 May 2024 18:18:53 +0200 [thread overview]
Message-ID: <20240508161853.GB2573154@ragnatech.se> (raw)
In-Reply-To: <20240506164941.110389-5-jacopo.mondi@ideasonboard.com>
Hi Jacopo,
I really like this patch, the active state is a nice idea. It works as
expected on Gen3, but produces a NULL pointer dereference when booted on
Gen4.
[ 0.547783] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
[ 0.548942] Mem abort info:
[ 0.549328] ESR = 0x0000000096000044
[ 0.549813] EC = 0x25: DABT (current EL), IL = 32 bits
[ 0.550495] SET = 0, FnV = 0
[ 0.550889] EA = 0, S1PTW = 0
[ 0.551294] FSC = 0x04: level 0 translation fault
[ 0.551919] Data abort info:
[ 0.552291] ISV = 0, ISS = 0x00000044, ISS2 = 0x00000000
[ 0.552993] CM = 0, WnR = 1, TnD = 0, TagAccess = 0
[ 0.553660] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 0.554342] [0000000000000010] user address but active_mm is swapper
[ 0.555178] Internal error: Oops: 0000000096000044 [#1] PREEMPT SMP
[ 0.555976] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.9.0-rc2-arm64-renesas-00321-gfba919e351c6 #123
[ 0.557150] Hardware name: Renesas White Hawk Single board based on r8a779g2 (DT)
[ 0.558093] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.558971] pc : rcsi2_init_state+0x40/0x74
[ 0.559513] lr : rcsi2_init_state+0x40/0x74
[ 0.560043] sp : ffff80008258ba60
[ 0.560461] x29: ffff80008258ba60 x28: 0000000000000000 x27: ffff0006bf007538
[ 0.561365] x26: ffff000440cd54a0 x25: ffff000440cd5758 x24: ffff8000812dff08
[ 0.562265] x23: 0000043800000780 x22: 000000010000100a x21: 0000000000000008
[ 0.563166] x20: ffff000440924e00 x19: 0000000000000002 x18: ffffffffffffffff
[ 0.564066] x17: ffff00044244bc00 x16: 0000000000000100 x15: 0000000000000028
[ 0.564966] x14: 0000000000002104 x13: 0000000000000001 x12: 0000000000000001
[ 0.565866] x11: ffff800081af8390 x10: ffff800081a41808 x9 : ffff800082157000
[ 0.566766] x8 : 0000000000000004 x7 : ffff800081a41340 x6 : ffff80008210e110
[ 0.567667] x5 : ffff0004409d58f8 x4 : ffff800081ae3808 x3 : 0000000000000000
[ 0.568567] x2 : 0000000000000000 x1 : 0000000000000002 x0 : 0000000000000000
[ 0.569467] Call trace:
[ 0.569778] rcsi2_init_state+0x40/0x74
[ 0.570264] __v4l2_subdev_state_alloc+0x8c/0x110
[ 0.570862] __v4l2_subdev_init_finalize+0x14/0x34
[ 0.571467] rcsi2_probe+0x370/0x508
[ 0.571921] platform_probe+0x64/0xbc
[ 0.572389] really_probe+0xb8/0x294
[ 0.572843] __driver_probe_device+0x74/0x124
[ 0.573394] driver_probe_device+0x3c/0x15c
[ 0.573923] __driver_attach+0xec/0x1c4
[ 0.574408] bus_for_each_dev+0x74/0xcc
[ 0.574894] driver_attach+0x20/0x28
[ 0.575347] bus_add_driver+0xe0/0x1e0
[ 0.575821] driver_register+0x58/0x114
[ 0.576307] __platform_driver_register+0x24/0x2c
[ 0.576902] rcar_csi2_pdrv_init+0x18/0x20
[ 0.577425] do_one_initcall+0x80/0x2e8
[ 0.577912] kernel_init_freeable+0x238/0x34c
[ 0.578462] kernel_init+0x20/0x1c8
[ 0.578907] ret_from_fork+0x10/0x20
[ 0.579366] Code: 2a1303e1 aa1403e0 52800002 97ff22d0 (a9017c1f)
[ 0.580136] ---[ end trace 0000000000000000 ]---
[ 0.580736] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 0.581705] SMP: stopping secondary CPUs
[ 0.582205] Kernel Offset: disabled
[ 0.582645] CPU features: 0x0,00000003,80100528,4200700b
[ 0.583316] Memory Limit: none
[ 0.583703] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
On 2024-05-06 18:49:32 +0200, Jacopo Mondi wrote:
> Create the subdevice state with v4l2_subdev_init_finalize() and
> implement the init_state() operation to guarantee the state is initialized.
>
> Store the current image format in the subdev active state and remove it
> from the driver private structure.
>
> To guarantee the same image format is applied to all 4 source pads,
> propagate the format from the sink pad to the sources, disallowing
> changing format on a source pad.
>
> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> ---
> drivers/media/platform/renesas/rcar-csi2.c | 138 +++++++++++----------
> 1 file changed, 75 insertions(+), 63 deletions(-)
>
> diff --git a/drivers/media/platform/renesas/rcar-csi2.c b/drivers/media/platform/renesas/rcar-csi2.c
> index 2d464e43a5be..7a9c4007386f 100644
> --- a/drivers/media/platform/renesas/rcar-csi2.c
> +++ b/drivers/media/platform/renesas/rcar-csi2.c
> @@ -587,7 +587,8 @@ enum rcar_csi2_pads {
> struct rcar_csi2_info {
> int (*init_phtw)(struct rcar_csi2 *priv, unsigned int mbps);
> int (*phy_post_init)(struct rcar_csi2 *priv);
> - int (*start_receiver)(struct rcar_csi2 *priv);
> + int (*start_receiver)(struct rcar_csi2 *priv,
> + struct v4l2_subdev_state *state);
> void (*enter_standby)(struct rcar_csi2 *priv);
> const struct rcsi2_mbps_reg *hsfreqrange;
> unsigned int csi0clkfreqrange;
> @@ -613,8 +614,6 @@ struct rcar_csi2 {
>
> int channel_vc[4];
>
> - struct mutex lock; /* Protects mf and stream_count. */
> - struct v4l2_mbus_framefmt mf;
> int stream_count;
>
> bool cphy;
> @@ -808,20 +807,25 @@ static int rcsi2_get_active_lanes(struct rcar_csi2 *priv,
> return 0;
> }
>
> -static int rcsi2_start_receiver_gen3(struct rcar_csi2 *priv)
> +static int rcsi2_start_receiver_gen3(struct rcar_csi2 *priv,
> + struct v4l2_subdev_state *state)
> {
> const struct rcar_csi2_format *format;
> u32 phycnt, vcdt = 0, vcdt2 = 0, fld = 0;
> + const struct v4l2_mbus_framefmt *fmt;
> unsigned int lanes;
> unsigned int i;
> int mbps, ret;
>
> + /* Use the format on the sink pad to compute the receiver config. */
> + fmt = v4l2_subdev_state_get_format(state, RCAR_CSI2_SINK);
> +
> dev_dbg(priv->dev, "Input size (%ux%u%c)\n",
> - priv->mf.width, priv->mf.height,
> - priv->mf.field == V4L2_FIELD_NONE ? 'p' : 'i');
> + fmt->width, fmt->height,
> + fmt->field == V4L2_FIELD_NONE ? 'p' : 'i');
>
> /* Code is validated in set_fmt. */
> - format = rcsi2_code_to_fmt(priv->mf.code);
> + format = rcsi2_code_to_fmt(fmt->code);
> if (!format)
> return -EINVAL;
>
> @@ -849,11 +853,11 @@ static int rcsi2_start_receiver_gen3(struct rcar_csi2 *priv)
> vcdt2 |= vcdt_part << ((i % 2) * 16);
> }
>
> - if (priv->mf.field == V4L2_FIELD_ALTERNATE) {
> + if (fmt->field == V4L2_FIELD_ALTERNATE) {
> fld = FLD_DET_SEL(1) | FLD_FLD_EN4 | FLD_FLD_EN3 | FLD_FLD_EN2
> | FLD_FLD_EN;
>
> - if (priv->mf.height == 240)
> + if (fmt->height == 240)
> fld |= FLD_FLD_NUM(0);
> else
> fld |= FLD_FLD_NUM(1);
> @@ -1049,15 +1053,18 @@ static int rcsi2_c_phy_setting_v4h(struct rcar_csi2 *priv, int msps)
> return 0;
> }
>
> -static int rcsi2_start_receiver_v4h(struct rcar_csi2 *priv)
> +static int rcsi2_start_receiver_v4h(struct rcar_csi2 *priv,
> + struct v4l2_subdev_state *state)
> {
> const struct rcar_csi2_format *format;
> + const struct v4l2_mbus_framefmt *fmt;
> unsigned int lanes;
> int msps;
> int ret;
>
> - /* Calculate parameters */
> - format = rcsi2_code_to_fmt(priv->mf.code);
> + /* Use the format on the sink pad to compute the receiver config. */
> + fmt = v4l2_subdev_state_get_format(state, RCAR_CSI2_SINK);
> + format = rcsi2_code_to_fmt(fmt->code);
> if (!format)
> return -EINVAL;
>
> @@ -1114,7 +1121,7 @@ static int rcsi2_start_receiver_v4h(struct rcar_csi2 *priv)
> return 0;
> }
>
> -static int rcsi2_start(struct rcar_csi2 *priv)
> +static int rcsi2_start(struct rcar_csi2 *priv, struct v4l2_subdev_state *state)
> {
> int ret;
>
> @@ -1122,7 +1129,7 @@ static int rcsi2_start(struct rcar_csi2 *priv)
> if (ret < 0)
> return ret;
>
> - ret = priv->info->start_receiver(priv);
> + ret = priv->info->start_receiver(priv, state);
> if (ret) {
> rcsi2_enter_standby(priv);
> return ret;
> @@ -1146,17 +1153,16 @@ static void rcsi2_stop(struct rcar_csi2 *priv)
> static int rcsi2_s_stream(struct v4l2_subdev *sd, int enable)
> {
> struct rcar_csi2 *priv = sd_to_csi2(sd);
> + struct v4l2_subdev_state *state;
> int ret = 0;
>
> - mutex_lock(&priv->lock);
> + if (!priv->remote)
> + return -ENODEV;
>
> - if (!priv->remote) {
> - ret = -ENODEV;
> - goto out;
> - }
> + state = v4l2_subdev_lock_and_get_active_state(&priv->subdev);
>
> if (enable && priv->stream_count == 0) {
> - ret = rcsi2_start(priv);
> + ret = rcsi2_start(priv, state);
> if (ret)
> goto out;
> } else if (!enable && priv->stream_count == 1) {
> @@ -1165,49 +1171,26 @@ static int rcsi2_s_stream(struct v4l2_subdev *sd, int enable)
>
> priv->stream_count += enable ? 1 : -1;
> out:
> - mutex_unlock(&priv->lock);
> + v4l2_subdev_unlock_state(state);
>
> return ret;
> }
>
> static int rcsi2_set_pad_format(struct v4l2_subdev *sd,
> - struct v4l2_subdev_state *sd_state,
> + struct v4l2_subdev_state *state,
> struct v4l2_subdev_format *format)
> {
> - struct rcar_csi2 *priv = sd_to_csi2(sd);
> - struct v4l2_mbus_framefmt *framefmt;
> -
> - mutex_lock(&priv->lock);
> + if (format->pad > RCAR_CSI2_SINK)
> + return v4l2_subdev_get_fmt(sd, state, format);
>
> if (!rcsi2_code_to_fmt(format->format.code))
> format->format.code = rcar_csi2_formats[0].code;
>
> - if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> - priv->mf = format->format;
> - } else {
> - framefmt = v4l2_subdev_state_get_format(sd_state, 0);
> - *framefmt = format->format;
> - }
> -
> - mutex_unlock(&priv->lock);
> -
> - return 0;
> -}
> -
> -static int rcsi2_get_pad_format(struct v4l2_subdev *sd,
> - struct v4l2_subdev_state *sd_state,
> - struct v4l2_subdev_format *format)
> -{
> - struct rcar_csi2 *priv = sd_to_csi2(sd);
> -
> - mutex_lock(&priv->lock);
> -
> - if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
> - format->format = priv->mf;
> - else
> - format->format = *v4l2_subdev_state_get_format(sd_state, 0);
> + *v4l2_subdev_state_get_format(state, format->pad) = format->format;
>
> - mutex_unlock(&priv->lock);
> + /* Propagate the format to the source pads. */
> + for (unsigned int i = RCAR_CSI2_SOURCE_VC0; i < NR_OF_RCAR_CSI2_PAD; i++)
> + *v4l2_subdev_state_get_format(state, i) = format->format;
>
> return 0;
> }
> @@ -1218,7 +1201,7 @@ static const struct v4l2_subdev_video_ops rcar_csi2_video_ops = {
>
> static const struct v4l2_subdev_pad_ops rcar_csi2_pad_ops = {
> .set_fmt = rcsi2_set_pad_format,
> - .get_fmt = rcsi2_get_pad_format,
> + .get_fmt = v4l2_subdev_get_fmt,
> };
>
> static const struct v4l2_subdev_ops rcar_csi2_subdev_ops = {
> @@ -1226,6 +1209,30 @@ static const struct v4l2_subdev_ops rcar_csi2_subdev_ops = {
> .pad = &rcar_csi2_pad_ops,
> };
>
> +static int rcsi2_init_state(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state)
> +{
> + static const struct v4l2_mbus_framefmt rcar_csi2_default_fmt = {
> + .width = 1920,
> + .height = 1080,
> + .code = MEDIA_BUS_FMT_RGB888_1X24,
> + .colorspace = V4L2_COLORSPACE_SRGB,
> + .field = V4L2_FIELD_NONE,
> + .ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT,
> + .quantization = V4L2_QUANTIZATION_DEFAULT,
> + .xfer_func = V4L2_XFER_FUNC_DEFAULT,
> + };
> +
> + for (unsigned int i = RCAR_CSI2_SINK; i < NR_OF_RCAR_CSI2_PAD; i++)
> + *v4l2_subdev_state_get_format(state, i) = rcar_csi2_default_fmt;
> +
> + return 0;
> +}
> +
> +static const struct v4l2_subdev_internal_ops rcar_csi2_internal_ops = {
> + .init_state = rcsi2_init_state,
> +};
> +
> static irqreturn_t rcsi2_irq(int irq, void *data)
> {
> struct rcar_csi2 *priv = data;
> @@ -1251,14 +1258,17 @@ static irqreturn_t rcsi2_irq(int irq, void *data)
>
> static irqreturn_t rcsi2_irq_thread(int irq, void *data)
> {
> + struct v4l2_subdev_state *state;
> struct rcar_csi2 *priv = data;
>
> - mutex_lock(&priv->lock);
> + state = v4l2_subdev_lock_and_get_active_state(&priv->subdev);
> +
> rcsi2_stop(priv);
> usleep_range(1000, 2000);
> - if (rcsi2_start(priv))
> + if (rcsi2_start(priv, state))
> dev_warn(priv->dev, "Failed to restart CSI-2 receiver\n");
> - mutex_unlock(&priv->lock);
> +
> + v4l2_subdev_unlock_state(state);
>
> return IRQ_HANDLED;
> }
> @@ -1870,23 +1880,23 @@ static int rcsi2_probe(struct platform_device *pdev)
>
> priv->dev = &pdev->dev;
>
> - mutex_init(&priv->lock);
> priv->stream_count = 0;
>
> ret = rcsi2_probe_resources(priv, pdev);
> if (ret) {
> dev_err(priv->dev, "Failed to get resources\n");
> - goto error_mutex;
> + return ret;
> }
>
> platform_set_drvdata(pdev, priv);
>
> ret = rcsi2_parse_dt(priv);
> if (ret)
> - goto error_mutex;
> + return ret;
>
> priv->subdev.owner = THIS_MODULE;
> priv->subdev.dev = &pdev->dev;
> + priv->subdev.internal_ops = &rcar_csi2_internal_ops;
> v4l2_subdev_init(&priv->subdev, &rcar_csi2_subdev_ops);
> v4l2_set_subdevdata(&priv->subdev, &pdev->dev);
> snprintf(priv->subdev.name, sizeof(priv->subdev.name), "%s %s",
> @@ -1912,21 +1922,25 @@ static int rcsi2_probe(struct platform_device *pdev)
>
> pm_runtime_enable(&pdev->dev);
>
> + ret = v4l2_subdev_init_finalize(&priv->subdev);
> + if (ret)
> + goto error_pm_runtime;
> +
> ret = v4l2_async_register_subdev(&priv->subdev);
> if (ret < 0)
> - goto error_pm_runtime;
> + goto error_subdev;
>
> dev_info(priv->dev, "%d lanes found\n", priv->lanes);
>
> return 0;
>
> +error_subdev:
> + v4l2_subdev_cleanup(&priv->subdev);
> error_pm_runtime:
> pm_runtime_disable(&pdev->dev);
> error_async:
> v4l2_async_nf_unregister(&priv->notifier);
> v4l2_async_nf_cleanup(&priv->notifier);
> -error_mutex:
> - mutex_destroy(&priv->lock);
>
> return ret;
> }
> @@ -1941,8 +1955,6 @@ static void rcsi2_remove(struct platform_device *pdev)
> v4l2_subdev_cleanup(&priv->subdev);
>
> pm_runtime_disable(&pdev->dev);
> -
> - mutex_destroy(&priv->lock);
> }
>
> static struct platform_driver rcar_csi2_pdrv = {
> --
> 2.44.0
>
--
Kind Regards,
Niklas Söderlund
next prev parent reply other threads:[~2024-05-08 16:18 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-06 16:49 [PATCH v2 00/11] media: renesas: rcar-csi2: Use the subdev active state Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 01/11] media: rcar-vin: Fix YUYV8_1X16 handling for CSI-2 Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 02/11] media: rcar-csi2: Disable runtime_pm in probe error Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 03/11] media: rcar-csi2: Cleanup subdevice in remove() Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 04/11] media: rcar-csi2: Use the subdev active state Jacopo Mondi
2024-05-08 16:18 ` Niklas Söderlund [this message]
2024-05-09 7:25 ` Jacopo Mondi
2024-05-09 11:06 ` [PATCH v2.1 " Jacopo Mondi
2024-05-09 11:24 ` Niklas Söderlund
2024-05-09 11:32 ` Jacopo Mondi
2024-05-09 12:14 ` [PATCH v2.2 " Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 05/11] media: adv748x-csi2: Implement enum_mbus_codes Jacopo Mondi
2024-05-09 12:42 ` Laurent Pinchart
2024-05-09 13:44 ` Jacopo Mondi
2024-05-09 14:32 ` Laurent Pinchart
2024-05-06 16:49 ` [PATCH v2 06/11] media: adv748x-csi2: Validate the image format Jacopo Mondi
2024-05-09 12:44 ` Laurent Pinchart
2024-05-06 16:49 ` [PATCH v2 07/11] media: adv748x-csi2: Use the subdev active state Jacopo Mondi
2024-05-09 12:45 ` Laurent Pinchart
2024-05-06 16:49 ` [PATCH v2 08/11] media: adv748x-afe: Use 1X16 media bus code Jacopo Mondi
2024-05-09 12:47 ` Laurent Pinchart
2024-05-06 16:49 ` [PATCH v2 09/11] media: max9286: Fix enum_mbus_code Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 10/11] media: max9286: Use the subdev active state Jacopo Mondi
2024-05-09 14:35 ` Laurent Pinchart
2024-05-09 15:19 ` Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 11/11] media: max9286: Use frame interval from subdev state Jacopo Mondi
2024-05-09 12:51 ` Laurent Pinchart
2024-05-09 13:45 ` Jacopo Mondi
2024-05-09 14:11 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240508161853.GB2573154@ragnatech.se \
--to=niklas.soderlund+renesas@ragnatech.se \
--cc=jacopo.mondi@ideasonboard.com \
--cc=kieran.bingham+renesas@ideasonboard.com \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=tomi.valkeinen@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox