Linux Media Controller development
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Cc: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
	"Sakari Ailus" <sakari.ailus@linux.intel.com>,
	"Kieran Bingham" <kieran.bingham+renesas@ideasonboard.com>,
	"Tomi Valkeinen" <tomi.valkeinen@ideasonboard.com>,
	linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH v2 07/11] media: adv748x-csi2: Use the subdev active state
Date: Thu, 9 May 2024 15:45:44 +0300	[thread overview]
Message-ID: <20240509124544.GD17123@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20240506164941.110389-8-jacopo.mondi@ideasonboard.com>

Hi Jacopo,

Thank you for the patch.

On Mon, May 06, 2024 at 06:49:35PM +0200, Jacopo Mondi wrote:
> Initialize and use the subdev active state to store the subdevice
> format.
> 
> This simplifies the implementation of the get_fmt and set_fmt pad
> operations.
> 
> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  drivers/media/i2c/adv748x/adv748x-csi2.c | 107 +++++++++--------------
>  drivers/media/i2c/adv748x/adv748x.h      |   1 -
>  2 files changed, 42 insertions(+), 66 deletions(-)
> 
> diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
> index 3f22dc426d7a..76b5eefdc2a7 100644
> --- a/drivers/media/i2c/adv748x/adv748x-csi2.c
> +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
> @@ -6,7 +6,6 @@
>   */
>  
>  #include <linux/module.h>
> -#include <linux/mutex.h>
>  
>  #include <media/v4l2-ctrls.h>
>  #include <media/v4l2-device.h>
> @@ -71,7 +70,33 @@ static int adv748x_csi2_register_link(struct adv748x_csi2 *tx,
>  
>  /* -----------------------------------------------------------------------------
>   * v4l2_subdev_internal_ops
> - *
> + */
> +
> +static int adv748x_csi2_init_state(struct v4l2_subdev *sd,
> +				   struct v4l2_subdev_state *state)
> +{
> +	static const struct v4l2_mbus_framefmt adv748x_csi2_default_fmt = {
> +		.width		= 1280,
> +		.height		= 720,
> +		.code		= MEDIA_BUS_FMT_UYVY8_1X16,
> +		.colorspace	= V4L2_COLORSPACE_SRGB,
> +		.field		= V4L2_FIELD_NONE,
> +		.ycbcr_enc	= V4L2_YCBCR_ENC_DEFAULT,
> +		.quantization	= V4L2_QUANTIZATION_DEFAULT,
> +		.xfer_func	= V4L2_XFER_FUNC_DEFAULT,
> +	};
> +	struct v4l2_mbus_framefmt *fmt;
> +
> +	fmt = v4l2_subdev_state_get_format(state, ADV748X_CSI2_SINK);
> +	*fmt = adv748x_csi2_default_fmt;
> +
> +	fmt = v4l2_subdev_state_get_format(state, ADV748X_CSI2_SOURCE);
> +	*fmt = adv748x_csi2_default_fmt;
> +
> +	return 0;
> +}
> +
> +/*
>   * We use the internal registered operation to be able to ensure that our
>   * incremental subdevices (not connected in the forward path) can be registered
>   * against the resulting video path and media device.
> @@ -121,6 +146,7 @@ static int adv748x_csi2_registered(struct v4l2_subdev *sd)
>  }
>  
>  static const struct v4l2_subdev_internal_ops adv748x_csi2_internal_ops = {
> +	.init_state = adv748x_csi2_init_state,
>  	.registered = adv748x_csi2_registered,
>  };
>  
> @@ -173,41 +199,6 @@ static int adv748x_csi2_enum_mbus_code(struct v4l2_subdev *sd,
>  	return 0;
>  }
>  
> -static struct v4l2_mbus_framefmt *
> -adv748x_csi2_get_pad_format(struct v4l2_subdev *sd,
> -			    struct v4l2_subdev_state *sd_state,
> -			    unsigned int pad, u32 which)
> -{
> -	struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
> -
> -	if (which == V4L2_SUBDEV_FORMAT_TRY)
> -		return v4l2_subdev_state_get_format(sd_state, pad);
> -
> -	return &tx->format;
> -}
> -
> -static int adv748x_csi2_get_format(struct v4l2_subdev *sd,
> -				   struct v4l2_subdev_state *sd_state,
> -				   struct v4l2_subdev_format *sdformat)
> -{
> -	struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
> -	struct adv748x_state *state = tx->state;
> -	struct v4l2_mbus_framefmt *mbusformat;
> -
> -	mbusformat = adv748x_csi2_get_pad_format(sd, sd_state, sdformat->pad,
> -						 sdformat->which);
> -	if (!mbusformat)
> -		return -EINVAL;
> -
> -	mutex_lock(&state->mutex);
> -
> -	sdformat->format = *mbusformat;
> -
> -	mutex_unlock(&state->mutex);
> -
> -	return 0;
> -}
> -
>  static bool adv748x_csi2_is_fmt_supported(struct adv748x_csi2 *tx,
>  					  unsigned int code)
>  {
> @@ -230,9 +221,10 @@ static int adv748x_csi2_set_format(struct v4l2_subdev *sd,
>  				   struct v4l2_subdev_format *sdformat)
>  {
>  	struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
> -	struct adv748x_state *state = tx->state;
>  	struct v4l2_mbus_framefmt *mbusformat;
> -	int ret = 0;
> +
> +	if (sdformat->pad == ADV748X_CSI2_SOURCE)
> +		return v4l2_subdev_get_fmt(sd, sd_state, sdformat);
>  
>  	/*
>  	 * Make sure the format is supported, if not default it to
> @@ -241,34 +233,14 @@ static int adv748x_csi2_set_format(struct v4l2_subdev *sd,
>  	if (!adv748x_csi2_is_fmt_supported(tx, sdformat->format.code))
>  		sdformat->format.code = MEDIA_BUS_FMT_UYVY8_1X16;
>  
> -	mbusformat = adv748x_csi2_get_pad_format(sd, sd_state, sdformat->pad,
> -						 sdformat->which);
> -	if (!mbusformat)
> -		return -EINVAL;
> -
> -	mutex_lock(&state->mutex);
> -
> -	if (sdformat->pad == ADV748X_CSI2_SOURCE) {
> -		const struct v4l2_mbus_framefmt *sink_fmt;
> -
> -		sink_fmt = adv748x_csi2_get_pad_format(sd, sd_state,
> -						       ADV748X_CSI2_SINK,
> -						       sdformat->which);
> -
> -		if (!sink_fmt) {
> -			ret = -EINVAL;
> -			goto unlock;
> -		}
> -
> -		sdformat->format = *sink_fmt;
> -	}
> -
> +	mbusformat = v4l2_subdev_state_get_format(sd_state, sdformat->pad);
>  	*mbusformat = sdformat->format;
>  
> -unlock:
> -	mutex_unlock(&state->mutex);
> +	/* Propagate format to the source pad. */
> +	mbusformat = v4l2_subdev_state_get_format(sd_state, ADV748X_CSI2_SOURCE);
> +	*mbusformat = sdformat->format;
>  
> -	return ret;
> +	return 0;
>  }
>  
>  static int adv748x_csi2_get_mbus_config(struct v4l2_subdev *sd, unsigned int pad,
> @@ -287,7 +259,7 @@ static int adv748x_csi2_get_mbus_config(struct v4l2_subdev *sd, unsigned int pad
>  
>  static const struct v4l2_subdev_pad_ops adv748x_csi2_pad_ops = {
>  	.enum_mbus_code = adv748x_csi2_enum_mbus_code,
> -	.get_fmt = adv748x_csi2_get_format,
> +	.get_fmt = v4l2_subdev_get_fmt,
>  	.set_fmt = adv748x_csi2_set_format,
>  	.get_mbus_config = adv748x_csi2_get_mbus_config,
>  };
> @@ -379,6 +351,11 @@ int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx)
>  	if (ret)
>  		goto err_cleanup_subdev;
>  
> +	tx->sd.state_lock = &state->mutex;
> +	ret = v4l2_subdev_init_finalize(&tx->sd);
> +	if (ret)
> +		goto err_free_ctrl;
> +
>  	ret = v4l2_async_register_subdev(&tx->sd);
>  	if (ret)
>  		goto err_free_ctrl;
> diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
> index d2b5e722e997..9bc0121d0eff 100644
> --- a/drivers/media/i2c/adv748x/adv748x.h
> +++ b/drivers/media/i2c/adv748x/adv748x.h
> @@ -75,7 +75,6 @@ enum adv748x_csi2_pads {
>  
>  struct adv748x_csi2 {
>  	struct adv748x_state *state;
> -	struct v4l2_mbus_framefmt format;
>  	unsigned int page;
>  	unsigned int port;
>  	unsigned int num_lanes;

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2024-05-09 12:45 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-06 16:49 [PATCH v2 00/11] media: renesas: rcar-csi2: Use the subdev active state Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 01/11] media: rcar-vin: Fix YUYV8_1X16 handling for CSI-2 Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 02/11] media: rcar-csi2: Disable runtime_pm in probe error Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 03/11] media: rcar-csi2: Cleanup subdevice in remove() Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 04/11] media: rcar-csi2: Use the subdev active state Jacopo Mondi
2024-05-08 16:18   ` Niklas Söderlund
2024-05-09  7:25     ` Jacopo Mondi
2024-05-09 11:06   ` [PATCH v2.1 " Jacopo Mondi
2024-05-09 11:24     ` Niklas Söderlund
2024-05-09 11:32       ` Jacopo Mondi
2024-05-09 12:14   ` [PATCH v2.2 " Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 05/11] media: adv748x-csi2: Implement enum_mbus_codes Jacopo Mondi
2024-05-09 12:42   ` Laurent Pinchart
2024-05-09 13:44     ` Jacopo Mondi
2024-05-09 14:32       ` Laurent Pinchart
2024-05-06 16:49 ` [PATCH v2 06/11] media: adv748x-csi2: Validate the image format Jacopo Mondi
2024-05-09 12:44   ` Laurent Pinchart
2024-05-06 16:49 ` [PATCH v2 07/11] media: adv748x-csi2: Use the subdev active state Jacopo Mondi
2024-05-09 12:45   ` Laurent Pinchart [this message]
2024-05-06 16:49 ` [PATCH v2 08/11] media: adv748x-afe: Use 1X16 media bus code Jacopo Mondi
2024-05-09 12:47   ` Laurent Pinchart
2024-05-06 16:49 ` [PATCH v2 09/11] media: max9286: Fix enum_mbus_code Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 10/11] media: max9286: Use the subdev active state Jacopo Mondi
2024-05-09 14:35   ` Laurent Pinchart
2024-05-09 15:19     ` Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 11/11] media: max9286: Use frame interval from subdev state Jacopo Mondi
2024-05-09 12:51   ` Laurent Pinchart
2024-05-09 13:45     ` Jacopo Mondi
2024-05-09 14:11       ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240509124544.GD17123@pendragon.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=jacopo.mondi@ideasonboard.com \
    --cc=kieran.bingham+renesas@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    --cc=sakari.ailus@linux.intel.com \
    --cc=tomi.valkeinen@ideasonboard.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox