public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: Mathis Foerst <mathis.foerst@mt.com>
To: linux-kernel@vger.kernel.org
Cc: Mathis Foerst <mathis.foerst@mt.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	linux-media@vger.kernel.org, devicetree@vger.kernel.org,
	manuel.traut@mt.com, mathis.foerst@zuehlke.com
Subject: [PATCH v2 4/7] media: mt9m114: Factor out mt9m114_configure_pa
Date: Tue,  4 Mar 2025 11:36:44 +0100	[thread overview]
Message-ID: <20250304103647.34235-5-mathis.foerst@mt.com> (raw)
In-Reply-To: <20250304103647.34235-1-mathis.foerst@mt.com>

The function mt9m114_configure writes the configuration registers of both,
the pixel array (pa) and the image flow processor (ifp).
This is undesirable if only the config of the pa should be changed without
affecting the ifp.

Factor out the function mt9m114_configure_pa() that just writes the
pa-configuration.

Signed-off-by: Mathis Foerst <mathis.foerst@mt.com>
---
 drivers/media/i2c/mt9m114.c | 49 +++++++++++++++++++++++--------------
 1 file changed, 30 insertions(+), 19 deletions(-)

diff --git a/drivers/media/i2c/mt9m114.c b/drivers/media/i2c/mt9m114.c
index 104b146a5d11..a91bacc1421f 100644
--- a/drivers/media/i2c/mt9m114.c
+++ b/drivers/media/i2c/mt9m114.c
@@ -789,39 +789,22 @@ static int mt9m114_initialize(struct mt9m114 *sensor)
 	return 0;
 }
 
-static int mt9m114_configure(struct mt9m114 *sensor,
-			     struct v4l2_subdev_state *pa_state,
-			     struct v4l2_subdev_state *ifp_state)
+static int mt9m114_configure_pa(struct mt9m114 *sensor, struct v4l2_subdev_state *pa_state)
 {
 	const struct v4l2_mbus_framefmt *pa_format;
 	const struct v4l2_rect *pa_crop;
-	const struct mt9m114_format_info *ifp_info;
-	const struct v4l2_mbus_framefmt *ifp_format;
-	const struct v4l2_rect *ifp_crop;
-	const struct v4l2_rect *ifp_compose;
-	unsigned int hratio, vratio;
-	u64 output_format;
 	u64 read_mode;
+	unsigned int hratio, vratio;
 	int ret = 0;
 
 	pa_format = v4l2_subdev_state_get_format(pa_state, 0);
 	pa_crop = v4l2_subdev_state_get_crop(pa_state, 0);
 
-	ifp_format = v4l2_subdev_state_get_format(ifp_state, 1);
-	ifp_info = mt9m114_format_info(sensor, 1, ifp_format->code);
-	ifp_crop = v4l2_subdev_state_get_crop(ifp_state, 0);
-	ifp_compose = v4l2_subdev_state_get_compose(ifp_state, 0);
-
 	ret = cci_read(sensor->regmap, MT9M114_CAM_SENSOR_CONTROL_READ_MODE,
 		       &read_mode, NULL);
 	if (ret < 0)
 		return ret;
 
-	ret = cci_read(sensor->regmap, MT9M114_CAM_OUTPUT_FORMAT,
-		       &output_format, NULL);
-	if (ret < 0)
-		return ret;
-
 	hratio = pa_crop->width / pa_format->width;
 	vratio = pa_crop->height / pa_format->height;
 
@@ -853,6 +836,34 @@ static int mt9m114_configure(struct mt9m114 *sensor,
 	cci_write(sensor->regmap, MT9M114_CAM_SENSOR_CONTROL_READ_MODE,
 		  read_mode, &ret);
 
+	return ret;
+}
+
+static int mt9m114_configure(struct mt9m114 *sensor,
+			     struct v4l2_subdev_state *pa_state,
+			     struct v4l2_subdev_state *ifp_state)
+{
+	const struct mt9m114_format_info *ifp_info;
+	const struct v4l2_mbus_framefmt *ifp_format;
+	const struct v4l2_rect *ifp_crop;
+	const struct v4l2_rect *ifp_compose;
+	u64 output_format;
+	int ret = 0;
+
+	ifp_format = v4l2_subdev_state_get_format(ifp_state, 1);
+	ifp_info = mt9m114_format_info(sensor, 1, ifp_format->code);
+	ifp_crop = v4l2_subdev_state_get_crop(ifp_state, 0);
+	ifp_compose = v4l2_subdev_state_get_compose(ifp_state, 0);
+
+	ret = cci_read(sensor->regmap, MT9M114_CAM_OUTPUT_FORMAT,
+		       &output_format, NULL);
+	if (ret < 0)
+		return ret;
+
+	ret = mt9m114_configure_pa(sensor, pa_state);
+	if (ret < 0)
+		return ret;
+
 	/*
 	 * Color pipeline (IFP) cropping and scaling. Subtract 4 from the left
 	 * and top coordinates to compensate for the lines and columns removed
-- 
2.34.1


  parent reply	other threads:[~2025-03-04 10:38 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-04 10:36 [PATCH v2 0/7] MT9M114 driver bugfix and improvements Mathis Foerst
2025-03-04 10:36 ` [PATCH v2 1/7] media: dt-bindings: mt9m114: Add pad-slew-rate DT-binding Mathis Foerst
2025-03-05  7:21   ` Krzysztof Kozlowski
2025-03-04 10:36 ` [PATCH v2 2/7] media: mt9m114: Add get_mbus_config Mathis Foerst
2025-03-04 10:36 ` [PATCH v2 3/7] media: mt9m114: Bypass PLL if required Mathis Foerst
2025-03-04 10:36 ` Mathis Foerst [this message]
2025-03-04 10:36 ` [PATCH v2 5/7] media: mt9m114: Allow set_selection while streaming Mathis Foerst
2025-03-04 10:36 ` [PATCH v2 6/7] media: mt9m114: Fix deadlock in get_frame_interval/set_frame_interval Mathis Foerst
2025-03-04 10:36 ` [PATCH v2 7/7] media: mt9m114: Set pad-slew-rate Mathis Foerst

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250304103647.34235-5-mathis.foerst@mt.com \
    --to=mathis.foerst@mt.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=manuel.traut@mt.com \
    --cc=mathis.foerst@zuehlke.com \
    --cc=mchehab@kernel.org \
    --cc=robh@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox