Re: [PATCH v9 02/13] media: uapi: Add extensible param and stats blocks for RPPX1

["Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>]

Hi Jacopo,

Thanks for your review.

On 2026-06-03 12:50:08 +0200, Jacopo Mondi wrote:
> Hi Niklas
> 
> On Sat, May 16, 2026 at 11:13:09PM +0200, Niklas Söderlund wrote:
> > From: Jai Luthra <jai.luthra@ideasonboard.com>
> >
> > Add the scaffolding for the parameters and statistics buffers for
> > Dreamchip RPPX1. The parameters for each ISP function block will be
> > added together with the logic for it.
> >
> > In addition to the scaffolding add a common struct that describes the
> > measurement window. This struct is not specific to any block and will
> > used by many of them.
> >
> > Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
> > [Niklas: Commit message]
> > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> > ---
> >  .../uapi/linux/media/dreamchip/rppx1-config.h | 66 +++++++++++++++++++
> >  1 file changed, 66 insertions(+)
> >  create mode 100644 include/uapi/linux/media/dreamchip/rppx1-config.h
> >
> > diff --git a/include/uapi/linux/media/dreamchip/rppx1-config.h b/include/uapi/linux/media/dreamchip/rppx1-config.h
> > new file mode 100644
> > index 000000000000..26627be6f483
> > --- /dev/null
> > +++ b/include/uapi/linux/media/dreamchip/rppx1-config.h
> > @@ -0,0 +1,66 @@
> > +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
> > +/*
> > + * Dreamchip RPP-X1 ISP Driver - Userspace API
> > + *
> > + * Copyright (C) 2026 Renesas Electronics Corp.
> > + * Copyright (C) 2026 Ideas on Board Oy
> > + * Copyright (C) 2026 Ragnatech AB
> > + */
> > +
> > +#ifndef __UAPI_RPP_X1_CONFIG_H
> > +#define __UAPI_RPP_X1_CONFIG_H
> > +
> > +#include <linux/types.h>
> 
> v4l2-isp.h already includes this one

Thanks.

> 
> > +#include <linux/media/v4l2-isp.h>
> > +
> > +/**
> > + * struct rppx1_window - Measurement window
> > + *
> > + * RPP-X1 measurement window. Different blocks use a window or multiple
> > + * windows for measurement purposes. This defines a common type for all of
> > + * them. The number of relevant bits depends on the block where the window is
> > + * used and is specified in the per-block description
> > + *
> > + * @h_offs: horizontal offset from the left of the frame in pixels
> > + * @v_offs: vertical offset from the top of the frame in pixels
> > + * @h_size: horizontal size of the window in pixels
> > + * @v_size: vertical size of the window in pixels
> > + */
> > +struct rppx1_window {
> > +	__u16 h_offs;
> > +	__u16 v_offs;
> > +	__u16 h_size;
> > +	__u16 v_size;
> > +};
> > +
> > +/* ---------------------------------------------------------------------------
> > + * Parameter Structures
> > + *
> > + * Native RPP-X1 precision. Fields use __u32 where the hardware provides
> > + * wider-than-8-bit results.
> > + */
> > +
> > +/**
> > + * RPPX1_PARAMS_MAX_SIZE - Maximum size of all RPP-X1 parameter blocks
> > + *
> > + * Some types are reported twice as the same block might be instantiated in
> > + * multiple pipes.
> > + */
> > +#define RPPX1_PARAMS_MAX_SIZE 0
> > +
> > +/* ---------------------------------------------------------------------------
> > + * Statistics Structures
> > + *
> > + * Native RPP-X1 precision. Fields use __u32 where the hardware provides
> > + * wider-than-8-bit results.
> > + */
> > +
> > +/**
> > + * RPPX1_STATS_MAX_SIZE - Maximum size of all RPP-X1 statistics
> > + *
> > + * Some types are reported twice as the same block might be instantiated in
> > + * multiple pipes.
> > + */
> > +#define RPPX1_STATS_MAX_SIZE 0
> > +
> > +#endif /* __UAPI_RPP_X1_CONFIG_H */
> 
> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
> 
> Thanks
>   j
> 
> > --
> > 2.54.0
> >

-- 
Kind Regards,
Niklas Söderlund