Linux Media Controller development
 help / color / mirror / Atom feed
From: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
To: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Cc: Jacopo Mondi <jacopo.mondi@ideasonboard.com>,
	 Jai Luthra <jai.luthra+renesas@ideasonboard.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	 linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	 Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Subject: Re: [PATCH v9 12/13] media: rppx1: ga: Add support for gamma out correction
Date: Wed, 3 Jun 2026 16:33:52 +0200	[thread overview]
Message-ID: <aiA7Qk9CwyN-lE7M@zed> (raw)
In-Reply-To: <20260516211320.3041412-13-niklas.soderlund+renesas@ragnatech.se>

Hi Niklas

On Sat, May 16, 2026 at 11:13:19PM +0200, Niklas Söderlund wrote:
> Extend the RPPX1 driver to allow setting the gamma out correction
> configuration parameters. It uses the RPPX1 framework for parameters and
> its writer abstraction to allow the user to control how, and when,
> configuration is applied to the RPPX1.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
> Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
> Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
> Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>

Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>

Thanks
  j

> ---
>  .../platform/dreamchip/rppx1/rpp_module.h     |  1 +
>  .../platform/dreamchip/rppx1/rpp_params.c     |  5 ++
>  .../media/platform/dreamchip/rppx1/rppx1_ga.c | 43 ++++++++++++++-
>  .../uapi/linux/media/dreamchip/rppx1-config.h | 53 ++++++++++++++++++-
>  4 files changed, 100 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/platform/dreamchip/rppx1/rpp_module.h b/drivers/media/platform/dreamchip/rppx1/rpp_module.h
> index 48b61b5c35b4..948e26d7361d 100644
> --- a/drivers/media/platform/dreamchip/rppx1/rpp_module.h
> +++ b/drivers/media/platform/dreamchip/rppx1/rpp_module.h
> @@ -54,6 +54,7 @@ union rppx1_params_block {
>  	struct rppx1_hist_params hist;
>  	struct rppx1_exm_params exm;
>  	struct rppx1_wbmeas_params wbmeas;
> +	struct rppx1_ga_params ga;
>  };
>
>  union rppx1_stats_block {
> diff --git a/drivers/media/platform/dreamchip/rppx1/rpp_params.c b/drivers/media/platform/dreamchip/rppx1/rpp_params.c
> index 8d85d0c7bff1..86d445b52504 100644
> --- a/drivers/media/platform/dreamchip/rppx1/rpp_params.c
> +++ b/drivers/media/platform/dreamchip/rppx1/rpp_params.c
> @@ -30,6 +30,8 @@ rppx1_ext_params_blocks_info[] = {
>  	RPPX1_PARAMS_BLOCK_INFO(EXM_PRE1, exm),
>  	RPPX1_PARAMS_BLOCK_INFO(EXM_PRE2, exm),
>  	RPPX1_PARAMS_BLOCK_INFO(WBMEAS_POST, wbmeas),
> +	RPPX1_PARAMS_BLOCK_INFO(GA_HV, ga),
> +	RPPX1_PARAMS_BLOCK_INFO(GA_MV, ga),
>  };
>
>  int rppx1_params(struct rppx1 *rpp, struct vb2_buffer *vb, size_t max_size,
> @@ -84,6 +86,9 @@ int rppx1_params(struct rppx1 *rpp, struct vb2_buffer *vb, size_t max_size,
>  		case RPPX1_PARAMS_BLOCK_TYPE_WBMEAS_POST:
>  			module = &rpp->post.wbmeas;
>  			break;
> +		case RPPX1_PARAMS_BLOCK_TYPE_GA_HV:
> +			module = &rpp->hv.ga;
> +			break;
>  		default:
>  			dev_warn(rpp->dev,
>  				 "Not handled RPPX1 block type: 0x%04x\n",
> diff --git a/drivers/media/platform/dreamchip/rppx1/rppx1_ga.c b/drivers/media/platform/dreamchip/rppx1/rppx1_ga.c
> index 0667672b2694..1d9c24c43f77 100644
> --- a/drivers/media/platform/dreamchip/rppx1/rppx1_ga.c
> +++ b/drivers/media/platform/dreamchip/rppx1/rppx1_ga.c
> @@ -15,9 +15,11 @@
>  #define GAMMA_OUT_MODE_REG			0x0008
>  #define GAMMA_OUT_MODE_GAMMA_OUT_EQU_SEGM	BIT(0)
>
> -#define GAMMA_OUT_Y_REG_NUM			17
>  #define GAMMA_OUT_Y_REG(n)			(0x000c + (4 * (n)))
>
> +#define GAMMA_OUT_HV_GAMMA_CURVE_MASK		GENMASK(11, 0)
> +#define GAMMA_OUT_MV_GAMMA_CURVE_MASK		GENMASK(23, 0)
> +
>  static int rppx1_ga_probe(struct rpp_module *mod)
>  {
>  	/* Version check. */
> @@ -44,7 +46,46 @@ static int rppx1_ga_start(struct rpp_module *mod,
>  	return 0;
>  }
>
> +static int
> +rppx1_ga_fill_params(struct rpp_module *mod,
> +		     const union rppx1_params_block *block,
> +		     rppx1_reg_write write, void *priv)
> +{
> +	const struct rppx1_ga_params *cfg = &block->ga;
> +	u32 mask;
> +
> +	/* If the modules is disabled, simply bypass it. */
> +	if (cfg->header.flags & V4L2_ISP_PARAMS_FL_BLOCK_DISABLE) {
> +		write(priv, mod->base + GAMMA_OUT_ENABLE_REG, 0);
> +		return 0;
> +	}
> +
> +	switch (cfg->header.type) {
> +	case RPPX1_PARAMS_BLOCK_TYPE_GA_HV:
> +		mask = GAMMA_OUT_HV_GAMMA_CURVE_MASK;
> +		break;
> +	case RPPX1_PARAMS_BLOCK_TYPE_GA_MV:
> +		mask = GAMMA_OUT_MV_GAMMA_CURVE_MASK;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	write(priv, mod->base + GAMMA_OUT_MODE_REG, cfg->mode);
> +
> +	for (unsigned int i = 0; i < RPPX1_GA_MAX_SAMPLES; i++)
> +		write(priv, mod->base + GAMMA_OUT_Y_REG(i),
> +		      cfg->gamma_y[i] & mask);
> +
> +	/* Enable module. */
> +	write(priv, mod->base + GAMMA_OUT_ENABLE_REG,
> +	      GAMMA_OUT_ENABLE_GAMMA_OUT_EN);
> +
> +	return 0;
> +}
> +
>  const struct rpp_module_ops rppx1_ga_ops = {
>  	.probe = rppx1_ga_probe,
>  	.start = rppx1_ga_start,
> +	.fill_params = rppx1_ga_fill_params,
>  };
> diff --git a/include/uapi/linux/media/dreamchip/rppx1-config.h b/include/uapi/linux/media/dreamchip/rppx1-config.h
> index 7ebcc00ace04..05faec2f68e3 100644
> --- a/include/uapi/linux/media/dreamchip/rppx1-config.h
> +++ b/include/uapi/linux/media/dreamchip/rppx1-config.h
> @@ -91,6 +91,8 @@ enum rppx1_meas_chan {
>   * @RPPX1_PARAMS_BLOCK_TYPE_CCOR_POST: POST pipe Color Correction
>   * @RPPX1_PARAMS_BLOCK_TYPE_LSC_PRE1: PRE1 pipe Lens Shading Correction
>   * @RPPX1_PARAMS_BLOCK_TYPE_LSC_PRE2: PRE2 Lens Shading Correction
> + * @RPPX1_PARAMS_BLOCK_TYPE_GA_HV: Human Vision Pipe Gamma Out Correction
> + * @RPPX1_PARAMS_BLOCK_TYPE_GA_MV: Machine Vision Gamma Out Correction
>   */
>  enum rppx1_params_block_type {
>  	RPPX1_PARAMS_BLOCK_TYPE_WBMEAS_POST,
> @@ -107,6 +109,8 @@ enum rppx1_params_block_type {
>  	RPPX1_PARAMS_BLOCK_TYPE_CCOR_POST,
>  	RPPX1_PARAMS_BLOCK_TYPE_LSC_PRE1,
>  	RPPX1_PARAMS_BLOCK_TYPE_LSC_PRE2,
> +	RPPX1_PARAMS_BLOCK_TYPE_GA_HV,
> +	RPPX1_PARAMS_BLOCK_TYPE_GA_MV,
>  };
>
>  /**
> @@ -497,6 +501,51 @@ struct rppx1_lsc_params {
>  	__u16 y_sect_size[RPPX1_LSC_NUM_SECTORS];
>  };
>
> +/* Gamma Out */
> +#define RPPX1_GA_MAX_SAMPLES 17
> +
> +/**
> + * enum rppx1_ga_seg_mode - Gamma out curve segmentation mode
> + *
> + * Segmentation mode of the 16 input sampling points for the Gamma Out
> + * Correction module.
> + *
> + * @RPPX1_GA_SEG_MODE_LOGARITHMIC: logarithmic-like segmentation mode
> + * @RPPX1_GA_SEG_MODE_EQUIDISTANT: equidistant segmentation mode
> + */
> +enum rppx1_ga_seg_mode {
> +	RPPX1_GA_SEG_MODE_LOGARITHMIC,
> +	RPPX1_GA_SEG_MODE_EQUIDISTANT
> +};
> +
> +/**
> + * struct rppx1_ga_params - Gamma Out Correction configuration
> + *
> + * The Gamma Out Correction module is available on the Human Vision Output
> + * Pipe (HV) and the Machine Vision Output Pipe (MV). Userspace selects
> + * which pipe to operate by setting the @header.type field to
> + * RPPX1_PARAMS_BLOCK_TYPE_GA_HV or RPPX1_PARAMS_BLOCK_TYPE_GA_MV.
> + *
> + * The module allows to apply a @gamma_y gamma correction curve to RGB data
> + * represented as a table of 16 entries. The 16 input sampling points can be
> + * equidistant or segmented using a logarithmic scale according to the value of
> + * @mode.
> + *
> + * The gamma curve values are 12 bits on the HV output pipe and 24 bits on the
> + * MV output pipe. Userspace is expected to provide the curve values with a
> + * bit-depth matching the one of pipe in use.
> + *
> + * @header: block header (type = RPPX1_PARAMS_BLOCK_TYPE_GA_HV or
> + *	    type = RPPX1_PARAMS_BLOCK_TYPE_GA_MV)
> + * @mode: gamma curve input segmentation mode (see rppx1_ga_seg_mode)
> + * @gamma_y: gamma out curve y-axis values
> + */
> +struct rppx1_ga_params {
> +	struct v4l2_isp_params_block_header header;
> +	__u8 mode;
> +	__u32 gamma_y[RPPX1_GA_MAX_SAMPLES];
> +};
> +
>  /**
>   * RPPX1_PARAMS_MAX_SIZE - Maximum size of all RPP-X1 parameter blocks
>   *
> @@ -517,7 +566,9 @@ struct rppx1_lsc_params {
>  	sizeof(struct rppx1_bls_params)				+	\
>  	sizeof(struct rppx1_ccor_params)			+	\
>  	sizeof(struct rppx1_lsc_params)				+	\
> -	sizeof(struct rppx1_lsc_params))
> +	sizeof(struct rppx1_lsc_params)				+	\
> +	sizeof(struct rppx1_ga_params)				+	\
> +	sizeof(struct rppx1_ga_params))
>
>  /* ---------------------------------------------------------------------------
>   * Statistics Structures
> --
> 2.54.0
>

  reply	other threads:[~2026-06-03 14:33 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-16 21:13 [PATCH v9 00/13] media: Add support for R-Car ISP using Dreamchip RPPX1 ISP Niklas Söderlund
2026-05-16 21:13 ` [PATCH v9 01/13] media: Add RPP_X1_PARAMS and RPP_X1_STATS meta formats Niklas Söderlund
2026-06-03 10:49   ` Jacopo Mondi
2026-06-03 12:48     ` Niklas Söderlund
2026-05-16 21:13 ` [PATCH v9 02/13] media: uapi: Add extensible param and stats blocks for RPPX1 Niklas Söderlund
2026-06-03 10:50   ` Jacopo Mondi
2026-06-03 12:55     ` Niklas Söderlund
2026-05-16 21:13 ` [PATCH v9 03/13] media: rppx1: Add framework to support Dreamchip RPPX1 ISP Niklas Söderlund
2026-06-03 10:56   ` Jacopo Mondi
2026-06-03 12:24   ` Jacopo Mondi
2026-06-03 13:47     ` Niklas Söderlund
2026-06-03 14:26       ` Jacopo Mondi
2026-06-03 15:17         ` Niklas Söderlund
2026-06-03 15:33           ` Jacopo Mondi
2026-05-16 21:13 ` [PATCH v9 04/13] media: rcar-isp: Add support for ISPCORE Niklas Söderlund
2026-06-03 13:15   ` Jacopo Mondi
2026-05-16 21:13 ` [PATCH v9 05/13] media: rppx1: wbmeas: Add support for white balance measurement Niklas Söderlund
2026-06-03 13:35   ` Jacopo Mondi
2026-05-16 21:13 ` [PATCH v9 06/13] media: rppx1: awbg: Add support for white balance gain settings Niklas Söderlund
2026-06-03 13:38   ` Jacopo Mondi
2026-05-16 21:13 ` [PATCH v9 07/13] media: rppx1: exm: Add support for exposure measurement Niklas Söderlund
2026-06-03 13:57   ` Jacopo Mondi
2026-05-16 21:13 ` [PATCH v9 08/13] media: rppx1: hist: Add support histogram measurement Niklas Söderlund
2026-06-03 14:11   ` Jacopo Mondi
2026-05-16 21:13 ` [PATCH v9 09/13] media: rppx1: bls: Add support for black level compensation Niklas Söderlund
2026-05-16 21:13 ` [PATCH v9 10/13] media: rppx1: ccor: Add support for color correction matrix Niklas Söderlund
2026-05-16 21:13 ` [PATCH v9 11/13] media: rppx1: lsc: Add support for lens shade correction Niklas Söderlund
2026-06-03 14:32   ` Jacopo Mondi
2026-05-16 21:13 ` [PATCH v9 12/13] media: rppx1: ga: Add support for gamma out correction Niklas Söderlund
2026-06-03 14:33   ` Jacopo Mondi [this message]
2026-05-16 21:13 ` [PATCH v9 13/13] media: rppx1: lin: Add support for gamma sensor linearization Niklas Söderlund
2026-06-03 14:36   ` Jacopo Mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aiA7Qk9CwyN-lE7M@zed \
    --to=jacopo.mondi@ideasonboard.com \
    --cc=jacopo.mondi+renesas@ideasonboard.com \
    --cc=jai.luthra+renesas@ideasonboard.com \
    --cc=kuninori.morimoto.gx@renesas.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox