From: Hungyu Lin <dennylin0707@gmail.com>
To: Vikash Garodia <vikash.garodia@oss.qualcomm.com>,
Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>,
Abhinav Kumar <abhinav.kumar@linux.dev>,
Bryan O'Donoghue <bod@kernel.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>,
Stefan Schmidt <stefan.schmidt@linaro.org>,
Hans Verkuil <hverkuil@kernel.org>,
linux-media@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org, Hungyu Lin <dennylin0707@gmail.com>
Subject: [PATCH v6] media: qcom: iris: move OPP handling to VPU power transaction
Date: Wed, 29 Jul 2026 01:10:01 +0000 [thread overview]
Message-ID: <20260729011001.16999-1-dennylin0707@gmail.com> (raw)
The power-domain helpers currently update the OPP for core->dev while
enabling or disabling one functional power domain. This makes a
transaction-wide performance state depend on a low-level helper and can
leave the maximum OPP selected when a later power-domain resume fails.
Move the maximum OPP request to iris_vpu_power_on(), after the ICC vote
and before powering on the controller and hardware. Unwind the OPP vote
together with the ICC vote on failures.
Keep the power-domain helpers limited to runtime PM and use
pm_runtime_resume_and_get() so a failed resume does not leave the usage
counter incremented.
Fixes: bb8a95aa038e ("media: iris: implement power management")
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
---
Changes in v6:
- Move OPP handling from the power-domain helpers to
iris_vpu_power_on().
- Request the maximum OPP before powering on the controller and
hardware.
- Add OPP cleanup to the VPU power-on error path.
- Keep the power-domain helpers limited to runtime PM operations.
- Replace pm_runtime_get_sync() with pm_runtime_resume_and_get().
- Rename the patch to reflect the new approach.
Changes in v5:
- Add an error path to roll back the OPP vote when
pm_runtime_resume_and_get() fails.
.../media/platform/qcom/iris/iris_resources.c | 16 +---------------
.../media/platform/qcom/iris/iris_vpu_common.c | 8 +++++++-
2 files changed, 8 insertions(+), 16 deletions(-)
diff --git a/drivers/media/platform/qcom/iris/iris_resources.c b/drivers/media/platform/qcom/iris/iris_resources.c
index df9b7badf0c6..5cccbf0636b0 100644
--- a/drivers/media/platform/qcom/iris/iris_resources.c
+++ b/drivers/media/platform/qcom/iris/iris_resources.c
@@ -104,39 +104,25 @@ int iris_enable_power_domains(struct iris_core *core, enum platform_pm_domain_ty
{
int pd_index = iris_get_pd_index_by_type(core, pd_type);
struct device *pd_dev;
- int ret;
if (pd_index < 0)
return pd_index;
pd_dev = core->pmdomain_tbl->pd_devs[pd_index];
- ret = iris_opp_set_rate(core->dev, ULONG_MAX);
- if (ret)
- return ret;
-
- ret = pm_runtime_get_sync(pd_dev);
- if (ret < 0)
- return ret;
-
- return ret;
+ return pm_runtime_resume_and_get(pd_dev);
}
int iris_disable_power_domains(struct iris_core *core, enum platform_pm_domain_type pd_type)
{
int pd_index = iris_get_pd_index_by_type(core, pd_type);
struct device *pd_dev;
- int ret;
if (pd_index < 0)
return pd_index;
pd_dev = core->pmdomain_tbl->pd_devs[pd_index];
- ret = iris_opp_set_rate(core->dev, 0);
- if (ret)
- return ret;
-
pm_runtime_put_sync(pd_dev);
return 0;
diff --git a/drivers/media/platform/qcom/iris/iris_vpu_common.c b/drivers/media/platform/qcom/iris/iris_vpu_common.c
index ac9881e2cdc2..5209c32933db 100644
--- a/drivers/media/platform/qcom/iris/iris_vpu_common.c
+++ b/drivers/media/platform/qcom/iris/iris_vpu_common.c
@@ -472,10 +472,14 @@ int iris_vpu_power_on(struct iris_core *core)
if (ret)
goto err;
- ret = core->iris_platform_data->vpu_ops->power_on_controller(core);
+ ret = iris_opp_set_rate(core->dev, ULONG_MAX);
if (ret)
goto err_unvote_icc;
+ ret = core->iris_platform_data->vpu_ops->power_on_controller(core);
+ if (ret)
+ goto err_opp;
+
ret = core->iris_platform_data->vpu_ops->power_on_hw(core);
if (ret)
goto err_power_off_ctrl;
@@ -495,6 +499,8 @@ int iris_vpu_power_on(struct iris_core *core)
err_power_off_ctrl:
core->iris_platform_data->vpu_ops->power_off_controller(core);
+err_opp:
+ iris_opp_set_rate(core->dev, 0);
err_unvote_icc:
iris_unset_icc_bw(core);
err:
--
2.43.0
next reply other threads:[~2026-07-29 1:10 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-29 1:10 Hungyu Lin [this message]
2026-08-19 11:28 ` [PATCH v6] media: qcom: iris: move OPP handling to VPU power transaction Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260729011001.16999-1-dennylin0707@gmail.com \
--to=dennylin0707@gmail.com \
--cc=abhinav.kumar@linux.dev \
--cc=bod@kernel.org \
--cc=dikshita.agarwal@oss.qualcomm.com \
--cc=hverkuil@kernel.org \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=stefan.schmidt@linaro.org \
--cc=vikash.garodia@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox