[PATCH v4 4/4] media: imagination: e5010: Enable autosuspend for runtime PM

[Brandon Brnich <b-brnich@ti.com>]

Current implementation only has one call to turn the device on -
start_streaming. This can waste power of device as the device can be in
STREAM_ON state, but no buffers are actually being submitted.

Need to set last_context_run to NULL in resume hook. This will trigger
QP value updates during next call to device_run.

Signed-off-by: Brandon Brnich <b-brnich@ti.com>
---
 .../platform/imagination/e5010-jpeg-enc.c     | 41 ++++++++++---------
 1 file changed, 21 insertions(+), 20 deletions(-)

diff --git a/drivers/media/platform/imagination/e5010-jpeg-enc.c b/drivers/media/platform/imagination/e5010-jpeg-enc.c
index 488f5d7e4c9d5..79347014562bd 100644
--- a/drivers/media/platform/imagination/e5010-jpeg-enc.c
+++ b/drivers/media/platform/imagination/e5010-jpeg-enc.c
@@ -976,6 +976,7 @@ static irqreturn_t e5010_irq(int irq, void *data)
 
 	v4l2_m2m_job_finish(e5010->m2m_dev, ctx->fh.m2m_ctx);
 	dprintk(e5010, 3, "ctx: 0x%p Finish job\n", ctx);
+	pm_runtime_put_autosuspend(e5010->dev);
 
 job_unlock:
 	spin_unlock(&e5010->hw_lock);
@@ -1105,6 +1106,11 @@ static int e5010_probe(struct platform_device *pdev)
 		goto fail_after_video_register_device;
 	}
 
+	ret = e5010_init_device(e5010);
+	if (ret) {
+		dev_err_probe(dev, ret, "failed to init device\n");
+		goto fail_after_clock_enable;
+	}
 
 	ret = video_register_device(e5010->vdev, VFL_TYPE_VIDEO, 0);
 	if (ret) {
@@ -1112,7 +1118,11 @@ static int e5010_probe(struct platform_device *pdev)
 		goto fail_after_clock_enable;
 	}
 
+	pm_runtime_set_autosuspend_delay(dev, 100);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
+	pm_runtime_idle(dev);
 
 	v4l2_info(&e5010->v4l2_dev, "Device registered as /dev/video%d\n",
 		  e5010->vdev->num);
@@ -1299,31 +1309,13 @@ static int e5010_encoder_cmd(struct file *file, void *priv,
 static int e5010_start_streaming(struct vb2_queue *q, unsigned int count)
 {
 	struct e5010_context *ctx = vb2_get_drv_priv(q);
-	int ret;
 
 	struct e5010_q_data *queue = get_queue(ctx, q->type);
 
 	v4l2_m2m_update_start_streaming_state(ctx->fh.m2m_ctx, q);
 	queue->sequence = 0;
 
-	ret = pm_runtime_resume_and_get(ctx->e5010->dev);
-	if (ret < 0) {
-		v4l2_err(&ctx->e5010->v4l2_dev, "failed to power up jpeg\n");
-		goto fail;
-	}
-
-	ret = e5010_init_device(ctx->e5010);
-	if (ret) {
-		v4l2_err(&ctx->e5010->v4l2_dev, "failed to Enable e5010 device\n");
-		goto fail;
-	}
-
 	return 0;
-
-fail:
-	e5010_vb2_buffers_return(q, VB2_BUF_STATE_QUEUED);
-
-	return ret;
 }
 
 static void e5010_stop_streaming(struct vb2_queue *q)
@@ -1339,8 +1331,6 @@ static void e5010_stop_streaming(struct vb2_queue *q)
 	    v4l2_m2m_has_stopped(ctx->fh.m2m_ctx)) {
 		v4l2_event_queue_fh(&ctx->fh, &e5010_eos_event);
 	}
-
-	pm_runtime_put_sync(ctx->e5010->dev);
 }
 
 static void e5010_device_run(void *priv)
@@ -1353,7 +1343,15 @@ static void e5010_device_run(void *priv)
 	unsigned long flags;
 	int num_planes = ctx->out_queue.fmt->num_planes;
 
+	ret = pm_runtime_resume_and_get(e5010->dev);
+	if (ret < 0) {
+		dev_err(e5010->dev, "Device failed to turn on\n");
+		v4l2_m2m_job_finish(e5010->m2m_dev, ctx->fh.m2m_ctx);
+		return;
+	}
+
 	spin_lock_irqsave(&e5010->hw_lock, flags);
+
 	s_vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
 	WARN_ON(!s_vb);
 	d_vb = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
@@ -1484,6 +1482,7 @@ static void e5010_device_run(void *priv)
 	e5010_reset(e5010->dev, e5010->core_base, e5010->mmu_base);
 
 no_ready_buf_err:
+	pm_runtime_put_autosuspend(e5010->dev);
 	if (s_vb) {
 		v4l2_m2m_src_buf_remove_by_buf(ctx->fh.m2m_ctx, s_vb);
 		v4l2_m2m_buf_done(s_vb, VB2_BUF_STATE_ERROR);
@@ -1518,6 +1517,8 @@ static int e5010_runtime_resume(struct device *dev)
 		return ret;
 	}
 
+	e5010->last_context_run = NULL;
+
 	return 0;
 }
 
-- 
2.43.0