* ISPsupport @ 2012-09-11 3:00 John Tobias 2012-09-26 11:33 ` ISPsupport Laurent Pinchart 0 siblings, 1 reply; 4+ messages in thread From: John Tobias @ 2012-09-11 3:00 UTC (permalink / raw) To: linux-media Hi all, I tried devel-ISPSUPPORT-IPIPE and devel-ISPSUPPORT, the kernel detected my image sensor (ov5650). But, when I execute the "yavta /dev/video0 -c4 -n1 -s2592x1944 -fSGRBG10 -Fov5650-2592x1944-#.bin" I was getting "Unable to start streaming: Invalid argument (22).". I would like to know if anyone here can guide me a bit in order to have a working environment?. Regards, John ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ISPsupport 2012-09-11 3:00 ISPsupport John Tobias @ 2012-09-26 11:33 ` Laurent Pinchart 2012-09-27 21:32 ` ISPsupport John Tobias 0 siblings, 1 reply; 4+ messages in thread From: Laurent Pinchart @ 2012-09-26 11:33 UTC (permalink / raw) To: John Tobias; +Cc: linux-media Hi John, On Monday 10 September 2012 20:00:54 John Tobias wrote: > Hi all, > > I tried devel-ISPSUPPORT-IPIPE and devel-ISPSUPPORT, It would help you you told use what hardware you're running on, what kernel version you're using, and what devel-ISPSUPPORT-IPIPE and devel-ISPSUPPORT are. > the kernel > detected my image sensor (ov5650). But, when I execute the "yavta > /dev/video0 -c4 -n1 -s2592x1944 -fSGRBG10 -Fov5650-2592x1944-#.bin" I > was getting "Unable to start streaming: Invalid argument (22).". > > I would like to know if anyone here can guide me a bit in order to > have a working environment?. -- Regards, Laurent Pinchart ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ISPsupport 2012-09-26 11:33 ` ISPsupport Laurent Pinchart @ 2012-09-27 21:32 ` John Tobias 2012-09-27 21:53 ` ISPsupport Gary Thomas 0 siblings, 1 reply; 4+ messages in thread From: John Tobias @ 2012-09-27 21:32 UTC (permalink / raw) To: Laurent Pinchart; +Cc: linux-media Hi Laurent, I am using Pandaboard ES. I got it working now, although I am still trying to figure out how to use the pipe, resizer, uyvy output instead of SGRBG10. Do you have some example for creating a pipe/link in media-ctl from SGRBG10 to UYVY?. Regards, John On Wed, Sep 26, 2012 at 4:33 AM, Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > Hi John, > > On Monday 10 September 2012 20:00:54 John Tobias wrote: >> Hi all, >> >> I tried devel-ISPSUPPORT-IPIPE and devel-ISPSUPPORT, > > It would help you you told use what hardware you're running on, what kernel > version you're using, and what devel-ISPSUPPORT-IPIPE and devel-ISPSUPPORT > are. > >> the kernel >> detected my image sensor (ov5650). But, when I execute the "yavta >> /dev/video0 -c4 -n1 -s2592x1944 -fSGRBG10 -Fov5650-2592x1944-#.bin" I >> was getting "Unable to start streaming: Invalid argument (22).". >> >> I would like to know if anyone here can guide me a bit in order to >> have a working environment?. > > -- > Regards, > > Laurent Pinchart > ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ISPsupport 2012-09-27 21:32 ` ISPsupport John Tobias @ 2012-09-27 21:53 ` Gary Thomas 0 siblings, 0 replies; 4+ messages in thread From: Gary Thomas @ 2012-09-27 21:53 UTC (permalink / raw) To: John Tobias; +Cc: Laurent Pinchart, linux-media On 2012-09-27 15:32, John Tobias wrote: > Hi Laurent, > > I am using Pandaboard ES. I got it working now, although I am still > trying to figure out how to use the pipe, resizer, uyvy output instead > of SGRBG10. > Do you have some example for creating a pipe/link in media-ctl from > SGRBG10 to UYVY?. You can try this, but I wasn't able to make it work & TI haven't been any help figuring out why (the media-control based pipelines are not officially supported by TI) media-ctl -r media-ctl -l '"OMAP4 ISS CSI2a":1 -> "OMAP4 ISS ISP IPIPEIF":0 [1]' media-ctl -l '"OMAP4 ISS ISP IPIPEIF":2 -> "OMAP4 ISS ISP IPIPE":0 [1]' media-ctl -l '"OMAP4 ISS ISP IPIPE":1 -> "OMAP4 ISS ISP resizer":0 [1]' media-ctl -l '"OMAP4 ISS ISP resizer":1 -> "OMAP4 ISS ISP resizer a output":0 [1]' media-ctl -V '"ov5650 3-0036":0 [SGRBG10 2592x1944]' media-ctl -V '"OMAP4 ISS CSI2a":0 [SGRBG10 2592x1944]' media-ctl -V '"OMAP4 ISS ISP IPIPEIF":0 [SGRBG10 2592x1944]' media-ctl -V '"OMAP4 ISS ISP IPIPE":0 [SGRBG10 2592x1944]' media-ctl -f '"OMAP4 ISS ISP resizer":0 [UYVY 2592x1944]' If you can make it go, please let me/us know how! > On Wed, Sep 26, 2012 at 4:33 AM, Laurent Pinchart > <laurent.pinchart@ideasonboard.com> wrote: >> Hi John, >> >> On Monday 10 September 2012 20:00:54 John Tobias wrote: >>> Hi all, >>> >>> I tried devel-ISPSUPPORT-IPIPE and devel-ISPSUPPORT, >> >> It would help you you told use what hardware you're running on, what kernel >> version you're using, and what devel-ISPSUPPORT-IPIPE and devel-ISPSUPPORT >> are. >> >>> the kernel >>> detected my image sensor (ov5650). But, when I execute the "yavta >>> /dev/video0 -c4 -n1 -s2592x1944 -fSGRBG10 -Fov5650-2592x1944-#.bin" I >>> was getting "Unable to start streaming: Invalid argument (22).". >>> >>> I would like to know if anyone here can guide me a bit in order to >>> have a working environment?. >> >> -- >> Regards, >> >> Laurent Pinchart >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-09-27 22:01 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-09-11 3:00 ISPsupport John Tobias 2012-09-26 11:33 ` ISPsupport Laurent Pinchart 2012-09-27 21:32 ` ISPsupport John Tobias 2012-09-27 21:53 ` ISPsupport Gary Thomas
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox