public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
* [PATCH] media: replace bellow -> below
@ 2015-05-08 12:01 Mauro Carvalho Chehab
  2015-05-08 12:05 ` Laurent Pinchart
  0 siblings, 1 reply; 2+ messages in thread
From: Mauro Carvalho Chehab @ 2015-05-08 12:01 UTC (permalink / raw)
  To: Linux Media Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, Markus Elfring,
	David Härdeman, Shuah Khan, Hans Verkuil, Cheolhyun Park,
	Benoit Taine, Prabhakar Lad, Laurent Pinchart, Sakari Ailus

Bellow is yelling. Ok, sometimes the code is yells a lot, but
but this is not the case there ;)

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

diff --git a/drivers/media/common/siano/smsir.c b/drivers/media/common/siano/smsir.c
index 1d60d200d9ab..41f2a3939979 100644
--- a/drivers/media/common/siano/smsir.c
+++ b/drivers/media/common/siano/smsir.c
@@ -78,7 +78,7 @@ int sms_ir_init(struct smscore_device_t *coredev)
 	dev->dev.parent = coredev->device;
 
 #if 0
-	/* TODO: properly initialize the parameters bellow */
+	/* TODO: properly initialize the parameters below */
 	dev->input_id.bustype = BUS_USB;
 	dev->input_id.version = 1;
 	dev->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
diff --git a/drivers/media/dvb-frontends/drx39xyj/drxj.c b/drivers/media/dvb-frontends/drx39xyj/drxj.c
index 61f76038442a..52245354bf04 100644
--- a/drivers/media/dvb-frontends/drx39xyj/drxj.c
+++ b/drivers/media/dvb-frontends/drx39xyj/drxj.c
@@ -9541,7 +9541,7 @@ ctrl_get_qam_sig_quality(struct drx_demod_instance *demod)
 	/* ----------------------------------------- */
 	/* Pre Viterbi Symbol Error Rate Calculation */
 	/* ----------------------------------------- */
-	/* pre viterbi SER is good if it is bellow 0.025 */
+	/* pre viterbi SER is good if it is below 0.025 */
 
 	/* get the register value */
 	/*   no of quadrature symbol errors */
diff --git a/drivers/media/dvb-frontends/drxk_hard.c b/drivers/media/dvb-frontends/drxk_hard.c
index d46cf5f7cd2e..ad35264a3819 100644
--- a/drivers/media/dvb-frontends/drxk_hard.c
+++ b/drivers/media/dvb-frontends/drxk_hard.c
@@ -544,7 +544,7 @@ error:
 static int init_state(struct drxk_state *state)
 {
 	/*
-	 * FIXME: most (all?) of the values bellow should be moved into
+	 * FIXME: most (all?) of the values below should be moved into
 	 * struct drxk_config, as they are probably board-specific
 	 */
 	u32 ul_vsb_if_agc_mode = DRXK_AGC_CTRL_AUTO;
diff --git a/drivers/media/dvb-frontends/tda10021.c b/drivers/media/dvb-frontends/tda10021.c
index 1bff7f457e19..28d987068048 100644
--- a/drivers/media/dvb-frontends/tda10021.c
+++ b/drivers/media/dvb-frontends/tda10021.c
@@ -258,7 +258,7 @@ static int tda10021_set_parameters(struct dvb_frontend *fe)
 	}
 
 	/*
-	 * gcc optimizes the code bellow the same way as it would code:
+	 * gcc optimizes the code below the same way as it would code:
 	 *           "if (qam > 5) return -EINVAL;"
 	 * Yet, the code is clearer, as it shows what QAM standards are
 	 * supported by the driver, and avoids the usage of magic numbers on
diff --git a/drivers/media/dvb-frontends/tda10023.c b/drivers/media/dvb-frontends/tda10023.c
index ca1e0d54b69a..f92fbbbb4a71 100644
--- a/drivers/media/dvb-frontends/tda10023.c
+++ b/drivers/media/dvb-frontends/tda10023.c
@@ -331,7 +331,7 @@ static int tda10023_set_parameters(struct dvb_frontend *fe)
 	}
 
 	/*
-	 * gcc optimizes the code bellow the same way as it would code:
+	 * gcc optimizes the code below the same way as it would code:
 	 *		 "if (qam > 5) return -EINVAL;"
 	 * Yet, the code is clearer, as it shows what QAM standards are
 	 * supported by the driver, and avoids the usage of magic numbers on
diff --git a/drivers/media/i2c/tvaudio.c b/drivers/media/i2c/tvaudio.c
index 070c152da95a..0c50e5285cf6 100644
--- a/drivers/media/i2c/tvaudio.c
+++ b/drivers/media/i2c/tvaudio.c
@@ -272,7 +272,7 @@ static int chip_cmd(struct CHIPSTATE *chip, char *name, audiocmd *cmd)
 		return -EINVAL;
 	}
 
-	/* FIXME: it seems that the shadow bytes are wrong bellow !*/
+	/* FIXME: it seems that the shadow bytes are wrong below !*/
 
 	/* update our shadow register set; print bytes if (debug > 0) */
 	v4l2_dbg(1, debug, sd, "chip_cmd(%s): reg=%d, data:",
diff --git a/drivers/media/tuners/tuner-xc2028.c b/drivers/media/tuners/tuner-xc2028.c
index d12f5e4ad8bf..4e941f00b600 100644
--- a/drivers/media/tuners/tuner-xc2028.c
+++ b/drivers/media/tuners/tuner-xc2028.c
@@ -1094,7 +1094,7 @@ static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */,
 		 * Still need tests for XC3028L (firmware 3.2 or upper)
 		 * So, for now, let's just comment the per-firmware
 		 * version of this change. Reports with xc3028l working
-		 * with and without the lines bellow are welcome
+		 * with and without the lines below are welcome
 		 */
 
 		if (priv->firm_version < 0x0302) {
-- 
2.1.0


^ permalink raw reply related	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2015-05-08 12:05 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-05-08 12:01 [PATCH] media: replace bellow -> below Mauro Carvalho Chehab
2015-05-08 12:05 ` Laurent Pinchart

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox