Re: [RFC PATCH 5/6] V4L menu: move all platform drivers to the bottom of the menu.

[Mauro Carvalho Chehab <mchehab@infradead.org>]

Em 31-08-2011 10:38, Hans Verkuil escreveu:
> From: Hans Verkuil <hans.verkuil@cisco.com>

IMO, a submenu for those drivers makes sense.

> 
> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
> ---
>  drivers/media/video/Kconfig |  106 ++++++++++++++++++++++---------------------
>  1 files changed, 55 insertions(+), 51 deletions(-)
> 
> diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
> index 5beff36..d14da37 100644
> --- a/drivers/media/video/Kconfig
> +++ b/drivers/media/video/Kconfig
> @@ -630,25 +630,6 @@ config USB_S2255
>  
>  endif # V4L_USB_DRIVERS
>  
> -config VIDEO_SH_VOU
> -	tristate "SuperH VOU video output driver"
> -	depends on VIDEO_DEV && ARCH_SHMOBILE
> -	select VIDEOBUF_DMA_CONTIG
> -	help
> -	  Support for the Video Output Unit (VOU) on SuperH SoCs.
> -
> -config VIDEO_VIU
> -	tristate "Freescale VIU Video Driver"
> -	depends on VIDEO_V4L2 && PPC_MPC512x
> -	select VIDEOBUF_DMA_CONTIG
> -	default y
> -	---help---
> -	  Support for Freescale VIU video driver. This device captures
> -	  video data, or overlays video on DIU frame buffer.
> -
> -	  Say Y here if you want to enable VIU device on MPC5121e Rev2+.
> -	  In doubt, say N.
> -
>  config VIDEO_VIVI
>  	tristate "Virtual Video Driver"
>  	depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
> @@ -663,20 +644,8 @@ config VIDEO_VIVI
>  	  Say Y here if you want to test video apps or debug V4L devices.
>  	  In doubt, say N.
>  
> -source "drivers/media/video/davinci/Kconfig"
> -
> -source "drivers/media/video/omap/Kconfig"
> -
>  source "drivers/media/video/bt8xx/Kconfig"
>  
> -config VIDEO_VINO
> -	tristate "SGI Vino Video For Linux"
> -	depends on I2C && SGI_IP22 && VIDEO_V4L2
> -	select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
> -	help
> -	  Say Y here to build in support for the Vino video input system found
> -	  on SGI Indy machines.
> -
>  source "drivers/media/video/zoran/Kconfig"
>  
>  config VIDEO_MEYE
> @@ -695,16 +664,6 @@ config VIDEO_MEYE
>  
>  source "drivers/media/video/saa7134/Kconfig"
>  
> -config VIDEO_TIMBERDALE
> -	tristate "Support for timberdale Video In/LogiWIN"
> -	depends on VIDEO_V4L2 && I2C && DMADEVICES
> -	select DMA_ENGINE
> -	select TIMB_DMA
> -	select VIDEO_ADV7180
> -	select VIDEOBUF_DMA_CONTIG
> -	---help---
> -	  Add support for the Video In peripherial of the timberdale FPGA.
> -
>  source "drivers/media/video/cx88/Kconfig"
>  
>  source "drivers/media/video/cx23885/Kconfig"
> @@ -719,6 +678,61 @@ source "drivers/media/video/saa7164/Kconfig"
>  
>  source "drivers/media/video/marvell-ccic/Kconfig"
>  
> +config VIDEO_VIA_CAMERA
> +	tristate "VIAFB camera controller support"
> +	depends on FB_VIA
> +	select VIDEOBUF_DMA_SG
> +	select VIDEO_OV7670
> +	help
> +	   Driver support for the integrated camera controller in VIA
> +	   Chrome9 chipsets.  Currently only tested on OLPC xo-1.5 systems
> +	   with ov7670 sensors.
> +
> +#
> +# Platform multimedia device configuration
> +#
> +
> +source "drivers/media/video/davinci/Kconfig"
> +
> +source "drivers/media/video/omap/Kconfig"
> +
> +config VIDEO_SH_VOU
> +	tristate "SuperH VOU video output driver"
> +	depends on VIDEO_DEV && ARCH_SHMOBILE
> +	select VIDEOBUF_DMA_CONTIG
> +	help
> +	  Support for the Video Output Unit (VOU) on SuperH SoCs.
> +
> +config VIDEO_VIU
> +	tristate "Freescale VIU Video Driver"
> +	depends on VIDEO_V4L2 && PPC_MPC512x
> +	select VIDEOBUF_DMA_CONTIG
> +	default y
> +	---help---
> +	  Support for Freescale VIU video driver. This device captures
> +	  video data, or overlays video on DIU frame buffer.
> +
> +	  Say Y here if you want to enable VIU device on MPC5121e Rev2+.
> +	  In doubt, say N.
> +
> +config VIDEO_TIMBERDALE
> +	tristate "Support for timberdale Video In/LogiWIN"
> +	depends on VIDEO_V4L2 && I2C && DMADEVICES
> +	select DMA_ENGINE
> +	select TIMB_DMA
> +	select VIDEO_ADV7180
> +	select VIDEOBUF_DMA_CONTIG
> +	---help---
> +	  Add support for the Video In peripherial of the timberdale FPGA.
> +
> +config VIDEO_VINO
> +	tristate "SGI Vino Video For Linux"
> +	depends on I2C && SGI_IP22 && VIDEO_V4L2
> +	select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
> +	help
> +	  Say Y here to build in support for the Vino video input system found
> +	  on SGI Indy machines.
> +
>  config VIDEO_M32R_AR
>  	tristate "AR devices"
>  	depends on M32R && VIDEO_V4L2
> @@ -738,16 +752,6 @@ config VIDEO_M32R_AR_M64278
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called arv.
>  
> -config VIDEO_VIA_CAMERA
> -	tristate "VIAFB camera controller support"
> -	depends on FB_VIA
> -	select VIDEOBUF_DMA_SG
> -	select VIDEO_OV7670
> -	help
> -	   Driver support for the integrated camera controller in VIA
> -	   Chrome9 chipsets.  Currently only tested on OLPC xo-1.5 systems
> -	   with ov7670 sensors.
> -
>  config VIDEO_OMAP3
>  	tristate "OMAP 3 Camera support (EXPERIMENTAL)"
>  	select OMAP_IOMMU