From: Bingbu Cao <bingbu.cao@linux.intel.com>
To: Tomasz Figa <tfiga@chromium.org>, Bingbu Cao <bingbu.cao@intel.com>
Cc: Linux Media Mailing List <linux-media@vger.kernel.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>
Subject: Re: [PATCH v2] media: staging/intel-ipu3: make imgu use fixed running mode
Date: Thu, 9 Jan 2020 12:03:59 +0800 [thread overview]
Message-ID: <51c16983-a2e5-d18d-1852-bed88e9ca8b8@linux.intel.com> (raw)
In-Reply-To: <CAAFQd5BvQApETgz++17yzSCfagNj2=unZ2sDC7XcD2PG+1BWYQ@mail.gmail.com>
On 1/8/20 8:57 PM, Tomasz Figa wrote:
> On Mon, Dec 30, 2019 at 6:21 PM Bingbu Cao <bingbu.cao@intel.com> wrote:
>>
>> Currently, the imgu running mode need user to set by v4l2 ctrl.
>> However, imgu only support 2 pipes and 2 operation modes - video and
>> still. This patch make the first imgu subdev running as video and second
>> one running as still, it will make the user understand easily, it can
>> also cover current camera use cases requirement. The running mode is set
>> during subdev registering, no race-condition after change, so it is safe
>> to change the mode data type to integer.
>>
>> Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
>> ---
>> Documentation/media/v4l-drivers/ipu3.rst | 6 +-
>> drivers/staging/media/ipu3/include/intel-ipu3.h | 4 --
>> drivers/staging/media/ipu3/ipu3-v4l2.c | 74 +++----------------------
>> drivers/staging/media/ipu3/ipu3.h | 5 +-
>> 4 files changed, 12 insertions(+), 77 deletions(-)
>>
>
> Doesn't it make it impossible to use two video (aka fast) pipes?
Hi, Tomasz,
Yes, once applying this patch, you can not run two video pipes with same input.
I have no idea what are fast pipes and which scenario need two video pipes if
the driver did not support multiple camera?
>
> Best regards,
> Tomasz
>
>> diff --git a/Documentation/media/v4l-drivers/ipu3.rst b/Documentation/media/v4l-drivers/ipu3.rst
>> index e4904ab44e60..50bd264a3408 100644
>> --- a/Documentation/media/v4l-drivers/ipu3.rst
>> +++ b/Documentation/media/v4l-drivers/ipu3.rst
>> @@ -234,9 +234,9 @@ The IPU3 ImgU pipelines can be configured using the Media Controller, defined at
>> Firmware binary selection
>> -------------------------
>>
>> -The firmware binary is selected using the V4L2_CID_INTEL_IPU3_MODE, currently
>> -defined in drivers/staging/media/ipu3/include/intel-ipu3.h . "VIDEO" and "STILL"
>> -modes are available.
>> +The firmware binary is selected according to the running mode of imgu. There are
>> +2 modes are available - "video" and "still". "ipu3-imgu video" are running under
>> +"video" mode and "ipu3-imgu still" is running under "still" mode.
>>
>> Processing the image in raw Bayer format
>> ----------------------------------------
>> diff --git a/drivers/staging/media/ipu3/include/intel-ipu3.h b/drivers/staging/media/ipu3/include/intel-ipu3.h
>> index 08eaa0bad0de..d30d9d6c92db 100644
>> --- a/drivers/staging/media/ipu3/include/intel-ipu3.h
>> +++ b/drivers/staging/media/ipu3/include/intel-ipu3.h
>> @@ -12,10 +12,6 @@
>> #define V4L2_META_FMT_IPU3_PARAMS v4l2_fourcc('i', 'p', '3', 'p') /* IPU3 processing parameters */
>> #define V4L2_META_FMT_IPU3_STAT_3A v4l2_fourcc('i', 'p', '3', 's') /* IPU3 3A statistics */
>>
>> -/* from include/uapi/linux/v4l2-controls.h */
>> -#define V4L2_CID_INTEL_IPU3_BASE (V4L2_CID_USER_BASE + 0x10c0)
>> -#define V4L2_CID_INTEL_IPU3_MODE (V4L2_CID_INTEL_IPU3_BASE + 1)
>> -
>> /******************* ipu3_uapi_stats_3a *******************/
>>
>> #define IPU3_UAPI_MAX_STRIPES 2
>> diff --git a/drivers/staging/media/ipu3/ipu3-v4l2.c b/drivers/staging/media/ipu3/ipu3-v4l2.c
>> index 3c7ad1eed434..15d603690764 100644
>> --- a/drivers/staging/media/ipu3/ipu3-v4l2.c
>> +++ b/drivers/staging/media/ipu3/ipu3-v4l2.c
>> @@ -67,8 +67,6 @@ static int imgu_subdev_s_stream(struct v4l2_subdev *sd, int enable)
>> struct imgu_media_pipe *imgu_pipe = &imgu->imgu_pipe[pipe];
>>
>> dev_dbg(dev, "%s %d for pipe %u", __func__, enable, pipe);
>> - /* grab ctrl after streamon and return after off */
>> - v4l2_ctrl_grab(imgu_sd->ctrl, enable);
>>
>> if (!enable) {
>> imgu_sd->active = false;
>> @@ -96,7 +94,7 @@ static int imgu_subdev_s_stream(struct v4l2_subdev *sd, int enable)
>> if (imgu_pipe->nodes[IMGU_NODE_VF].enabled)
>> css_pipe->vf_output_en = true;
>>
>> - if (atomic_read(&imgu_sd->running_mode) == IPU3_RUNNING_MODE_VIDEO)
>> + if (imgu_sd->running_mode == IPU3_RUNNING_MODE_VIDEO)
>> css_pipe->pipe_id = IPU3_CSS_PIPE_ID_VIDEO;
>> else
>> css_pipe->pipe_id = IPU3_CSS_PIPE_ID_CAPTURE;
>> @@ -668,7 +666,7 @@ static int imgu_fmt(struct imgu_device *imgu, unsigned int pipe, int node,
>> if (imgu_pipe->nodes[IMGU_NODE_VF].enabled)
>> css_pipe->vf_output_en = true;
>>
>> - if (atomic_read(&imgu_sd->running_mode) == IPU3_RUNNING_MODE_VIDEO)
>> + if (imgu_sd->running_mode == IPU3_RUNNING_MODE_VIDEO)
>> css_pipe->pipe_id = IPU3_CSS_PIPE_ID_VIDEO;
>> else
>> css_pipe->pipe_id = IPU3_CSS_PIPE_ID_CAPTURE;
>> @@ -899,11 +897,6 @@ static struct v4l2_subdev_internal_ops imgu_subdev_internal_ops = {
>> .open = imgu_subdev_open,
>> };
>>
>> -static const struct v4l2_subdev_core_ops imgu_subdev_core_ops = {
>> - .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
>> - .unsubscribe_event = v4l2_event_subdev_unsubscribe,
>> -};
>> -
>> static const struct v4l2_subdev_video_ops imgu_subdev_video_ops = {
>> .s_stream = imgu_subdev_s_stream,
>> };
>> @@ -917,7 +910,6 @@ static const struct v4l2_subdev_pad_ops imgu_subdev_pad_ops = {
>> };
>>
>> static const struct v4l2_subdev_ops imgu_subdev_ops = {
>> - .core = &imgu_subdev_core_ops,
>> .video = &imgu_subdev_video_ops,
>> .pad = &imgu_subdev_pad_ops,
>> };
>> @@ -1011,44 +1003,6 @@ static const struct v4l2_ioctl_ops imgu_v4l2_meta_ioctl_ops = {
>> .vidioc_expbuf = vb2_ioctl_expbuf,
>> };
>>
>> -static int imgu_sd_s_ctrl(struct v4l2_ctrl *ctrl)
>> -{
>> - struct imgu_v4l2_subdev *imgu_sd =
>> - container_of(ctrl->handler, struct imgu_v4l2_subdev, ctrl_handler);
>> - struct imgu_device *imgu = v4l2_get_subdevdata(&imgu_sd->subdev);
>> - struct device *dev = &imgu->pci_dev->dev;
>> -
>> - dev_dbg(dev, "set val %d to ctrl 0x%8x for subdev %u",
>> - ctrl->val, ctrl->id, imgu_sd->pipe);
>> -
>> - switch (ctrl->id) {
>> - case V4L2_CID_INTEL_IPU3_MODE:
>> - atomic_set(&imgu_sd->running_mode, ctrl->val);
>> - return 0;
>> - default:
>> - return -EINVAL;
>> - }
>> -}
>> -
>> -static const struct v4l2_ctrl_ops imgu_subdev_ctrl_ops = {
>> - .s_ctrl = imgu_sd_s_ctrl,
>> -};
>> -
>> -static const char * const imgu_ctrl_mode_strings[] = {
>> - "Video mode",
>> - "Still mode",
>> -};
>> -
>> -static const struct v4l2_ctrl_config imgu_subdev_ctrl_mode = {
>> - .ops = &imgu_subdev_ctrl_ops,
>> - .id = V4L2_CID_INTEL_IPU3_MODE,
>> - .name = "IPU3 Pipe Mode",
>> - .type = V4L2_CTRL_TYPE_MENU,
>> - .max = ARRAY_SIZE(imgu_ctrl_mode_strings) - 1,
>> - .def = IPU3_RUNNING_MODE_VIDEO,
>> - .qmenu = imgu_ctrl_mode_strings,
>> -};
>> -
>> /******************** Framework registration ********************/
>>
>> /* helper function to config node's video properties */
>> @@ -1094,7 +1048,6 @@ static int imgu_v4l2_subdev_register(struct imgu_device *imgu,
>> unsigned int pipe)
>> {
>> int i, r;
>> - struct v4l2_ctrl_handler *hdl = &imgu_sd->ctrl_handler;
>> struct imgu_media_pipe *imgu_pipe = &imgu->imgu_pipe[pipe];
>>
>> /* Initialize subdev media entity */
>> @@ -1115,21 +1068,12 @@ static int imgu_v4l2_subdev_register(struct imgu_device *imgu,
>> v4l2_subdev_init(&imgu_sd->subdev, &imgu_subdev_ops);
>> imgu_sd->subdev.entity.function = MEDIA_ENT_F_PROC_VIDEO_STATISTICS;
>> imgu_sd->subdev.internal_ops = &imgu_subdev_internal_ops;
>> - imgu_sd->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE |
>> - V4L2_SUBDEV_FL_HAS_EVENTS;
>> + imgu_sd->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
>> snprintf(imgu_sd->subdev.name, sizeof(imgu_sd->subdev.name),
>> - "%s %u", IMGU_NAME, pipe);
>> + "%s %s", IMGU_NAME, pipe ? "still" : "video");
>> v4l2_set_subdevdata(&imgu_sd->subdev, imgu);
>> - atomic_set(&imgu_sd->running_mode, IPU3_RUNNING_MODE_VIDEO);
>> - v4l2_ctrl_handler_init(hdl, 1);
>> - imgu_sd->subdev.ctrl_handler = hdl;
>> - imgu_sd->ctrl = v4l2_ctrl_new_custom(hdl, &imgu_subdev_ctrl_mode, NULL);
>> - if (hdl->error) {
>> - r = hdl->error;
>> - dev_err(&imgu->pci_dev->dev,
>> - "failed to create subdev v4l2 ctrl with err %d", r);
>> - goto fail_subdev;
>> - }
>> + imgu_sd->running_mode =
>> + pipe ? IPU3_RUNNING_MODE_STILL : IPU3_RUNNING_MODE_VIDEO;
>> r = v4l2_device_register_subdev(&imgu->v4l2_dev, &imgu_sd->subdev);
>> if (r) {
>> dev_err(&imgu->pci_dev->dev,
>> @@ -1141,7 +1085,6 @@ static int imgu_v4l2_subdev_register(struct imgu_device *imgu,
>> return 0;
>>
>> fail_subdev:
>> - v4l2_ctrl_handler_free(imgu_sd->subdev.ctrl_handler);
>> media_entity_cleanup(&imgu_sd->subdev.entity);
>>
>> return r;
>> @@ -1236,8 +1179,8 @@ static int imgu_v4l2_node_setup(struct imgu_device *imgu, unsigned int pipe,
>> }
>>
>> /* Initialize vdev */
>> - snprintf(vdev->name, sizeof(vdev->name), "%s %u %s",
>> - IMGU_NAME, pipe, node->name);
>> + snprintf(vdev->name, sizeof(vdev->name), "%s %s %s",
>> + IMGU_NAME, pipe ? "still" : "video", node->name);
>> vdev->release = video_device_release_empty;
>> vdev->fops = &imgu_v4l2_fops;
>> vdev->lock = &node->lock;
>> @@ -1307,7 +1250,6 @@ static void imgu_v4l2_subdev_cleanup(struct imgu_device *imgu, unsigned int i)
>> struct imgu_media_pipe *imgu_pipe = &imgu->imgu_pipe[i];
>>
>> v4l2_device_unregister_subdev(&imgu_pipe->imgu_sd.subdev);
>> - v4l2_ctrl_handler_free(imgu_pipe->imgu_sd.subdev.ctrl_handler);
>> media_entity_cleanup(&imgu_pipe->imgu_sd.subdev.entity);
>> }
>>
>> diff --git a/drivers/staging/media/ipu3/ipu3.h b/drivers/staging/media/ipu3/ipu3.h
>> index 73b123b2b8a2..de02a244732e 100644
>> --- a/drivers/staging/media/ipu3/ipu3.h
>> +++ b/drivers/staging/media/ipu3/ipu3.h
>> @@ -7,7 +7,6 @@
>> #include <linux/iova.h>
>> #include <linux/pci.h>
>>
>> -#include <media/v4l2-ctrls.h>
>> #include <media/v4l2-device.h>
>> #include <media/videobuf2-dma-sg.h>
>>
>> @@ -96,9 +95,7 @@ struct imgu_v4l2_subdev {
>> struct v4l2_rect bds; /* bayer-domain scaled resolution*/
>> struct v4l2_rect gdc; /* gdc output resolution */
>> } rect;
>> - struct v4l2_ctrl_handler ctrl_handler;
>> - struct v4l2_ctrl *ctrl;
>> - atomic_t running_mode;
>> + unsigned int running_mode;
>> bool active;
>> };
>>
>> --
>> 2.7.4
>>
>
next prev parent reply other threads:[~2020-01-09 3:58 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-30 9:26 [PATCH v2] media: staging/intel-ipu3: make imgu use fixed running mode Bingbu Cao
2020-01-08 12:57 ` Tomasz Figa
2020-01-09 4:03 ` Bingbu Cao [this message]
2020-01-09 4:06 ` Tomasz Figa
2020-01-09 4:37 ` Bingbu Cao
2020-01-13 17:53 ` Sakari Ailus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51c16983-a2e5-d18d-1852-bed88e9ca8b8@linux.intel.com \
--to=bingbu.cao@linux.intel.com \
--cc=bingbu.cao@intel.com \
--cc=linux-media@vger.kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=tfiga@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox