Re: [PATCH 07/11] media: i2c: imx290: Convert V4L2_CID_HBLANK to read/write

[Alexander Stein <alexander.stein@ew.tq-group.com>]

Hi Dave,

thanks for the patch.

Am Dienstag, 31. Januar 2023, 20:20:12 CET schrieb Dave Stevenson:
> The driver exposed V4L2_CID_HBLANK as a read only control to allow
> for exposure calculations and determination of the frame rate.
> 
> Convert to a read/write control so that the frame rate can be
> controlled.
> 
> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> ---
>  drivers/media/i2c/imx290.c | 33 +++++++++++++++++++--------------
>  1 file changed, 19 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
> index 9ddd6382b127..9006be6e5e7c 100644
> --- a/drivers/media/i2c/imx290.c
> +++ b/drivers/media/i2c/imx290.c
> @@ -47,6 +47,7 @@
>  #define IMX290_GAIN					
IMX290_REG_8BIT(0x3014)
>  #define IMX290_VMAX					
IMX290_REG_24BIT(0x3018)
>  #define IMX290_HMAX					
IMX290_REG_16BIT(0x301c)
> +#define IMX290_HMAX_MAX					0xffff
>  #define IMX290_SHS1					
IMX290_REG_24BIT(0x3020)
>  #define IMX290_WINWV_OB					
IMX290_REG_8BIT(0x303a)
>  #define IMX290_WINPV					
IMX290_REG_16BIT(0x303c)
> @@ -167,7 +168,7 @@ struct imx290_regval {
>  struct imx290_mode {
>  	u32 width;
>  	u32 height;
> -	u32 hmax;
> +	u32 hmax_min;
>  	u8 link_freq_index;
> 
>  	const struct imx290_regval *data;
> @@ -410,7 +411,7 @@ static const struct imx290_mode imx290_modes_2lanes[] =
> { {
>  		.width = 1920,
>  		.height = 1080,
> -		.hmax = 2200,
> +		.hmax_min = 2200,
>  		.link_freq_index = FREQ_INDEX_1080P,
>  		.data = imx290_1080p_settings,
>  		.data_size = ARRAY_SIZE(imx290_1080p_settings),
> @@ -418,7 +419,7 @@ static const struct imx290_mode imx290_modes_2lanes[] =
> { {
>  		.width = 1280,
>  		.height = 720,
> -		.hmax = 3300,
> +		.hmax_min = 3300,
>  		.link_freq_index = FREQ_INDEX_720P,
>  		.data = imx290_720p_settings,
>  		.data_size = ARRAY_SIZE(imx290_720p_settings),
> @@ -429,7 +430,7 @@ static const struct imx290_mode imx290_modes_4lanes[] =
> { {
>  		.width = 1920,
>  		.height = 1080,
> -		.hmax = 2200,
> +		.hmax_min = 2200,
>  		.link_freq_index = FREQ_INDEX_1080P,
>  		.data = imx290_1080p_settings,
>  		.data_size = ARRAY_SIZE(imx290_1080p_settings),
> @@ -437,7 +438,7 @@ static const struct imx290_mode imx290_modes_4lanes[] =
> { {
>  		.width = 1280,
>  		.height = 720,
> -		.hmax = 3300,
> +		.hmax_min = 3300,
>  		.link_freq_index = FREQ_INDEX_720P,
>  		.data = imx290_720p_settings,
>  		.data_size = ARRAY_SIZE(imx290_720p_settings),
> @@ -686,6 +687,12 @@ static int imx290_set_ctrl(struct v4l2_ctrl *ctrl)

You will need to remove V4L2_CID_HBLANK on the immediately return check at the 
beginning of the function. Otherwise this setting will never reach the device.

Best regards
Alexander

>  		}
>  		break;
> 
> +	case V4L2_CID_HBLANK:
> +		ret = imx290_write(imx290, IMX290_HMAX,
> +				   ctrl->val + imx290->current_mode-
>width,
> +				   NULL);
> +		break;
> +
>  	default:
>  		ret = -EINVAL;
>  		break;
> @@ -716,12 +723,14 @@ static void imx290_ctrl_update(struct imx290 *imx290,
>  			       const struct v4l2_mbus_framefmt *format,
>  			       const struct imx290_mode *mode)
>  {
> -	unsigned int hblank = mode->hmax - mode->width;
> +	unsigned int hblank_min = mode->hmax_min - mode->width;
> +	unsigned int hblank_max = IMX290_HMAX_MAX - mode->width;
>  	unsigned int vblank = IMX290_VMAX_DEFAULT - mode->height;
> 
>  	__v4l2_ctrl_s_ctrl(imx290->link_freq, mode->link_freq_index);
> 
> -	__v4l2_ctrl_modify_range(imx290->hblank, hblank, hblank, 1, hblank);
> +	__v4l2_ctrl_modify_range(imx290->hblank, hblank_min, hblank_max, 1,
> +				 hblank_min);
>  	__v4l2_ctrl_modify_range(imx290->vblank, vblank, vblank, 1, vblank);
>  }
> 
> @@ -778,10 +787,11 @@ static int imx290_ctrl_init(struct imx290 *imx290)
>  				     
ARRAY_SIZE(imx290_test_pattern_menu) - 1,
>  				     0, 0, imx290_test_pattern_menu);
> 
> +	/*
> +	 * Actual range will be set from imx290_ctrl_update later in the 
probe.
> +	 */
>  	imx290->hblank = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
>  					   V4L2_CID_HBLANK, 1, 1, 1, 
1);
> -	if (imx290->hblank)
> -		imx290->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> 
>  	imx290->vblank = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
>  					   V4L2_CID_VBLANK, 1, 1, 1, 
1);
> @@ -850,11 +860,6 @@ static int imx290_start_streaming(struct imx290
> *imx290, return ret;
>  	}
> 
> -	ret = imx290_write(imx290, IMX290_HMAX, imx290->current_mode->hmax,
> -			   NULL);
> -	if (ret)
> -		return ret;
> -
>  	/* Apply customized values from user */
>  	ret = __v4l2_ctrl_handler_setup(imx290->sd.ctrl_handler);
>  	if (ret) {