From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Cc: linux-media@vger.kernel.org, Adam Ford <aford173@gmail.com>,
Martin Kepplinger <martin.kepplinger@puri.sm>,
Paul Elder <paul.elder@ideasonboard.com>,
Rui Miguel Silva <rmfrfs@gmail.com>,
kernel@pengutronix.de, linux-imx@nxp.com
Subject: Re: [PATCH v2 8/8] media: imx: imx7-media-csi: Use V4L2 subdev active state
Date: Mon, 30 Jan 2023 22:14:30 +0200 [thread overview]
Message-ID: <Y9glJgXTnuAmwdG+@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20230130192610.u4svu2cxc6qjb22k@uno.localdomain>
Hi Jacopo,
On Mon, Jan 30, 2023 at 08:26:10PM +0100, Jacopo Mondi wrote:
> On Sun, Jan 29, 2023 at 04:34:29AM +0200, Laurent Pinchart wrote:
> > Use the V4L2 subdev active state API to store the active format. This
> > simplifies the driver not only by dropping the state stored in the
> > imx7_csi structure, but also by replacing the manual lock with the state
> > lock.
> >
> > The is_streaming field is now protected by the active state lock, either
> > explicitly in .s_stream(), where the active state is locked manually, or
> > implicitly in .set_fmt(), which is called with the state locked.
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > ---
> > Changes since v1:
> >
> > - Drop manual init_cfg call from probe
> > ---
> > drivers/media/platform/nxp/imx7-media-csi.c | 173 ++++++--------------
> > 1 file changed, 51 insertions(+), 122 deletions(-)
> >
> > diff --git a/drivers/media/platform/nxp/imx7-media-csi.c b/drivers/media/platform/nxp/imx7-media-csi.c
> > index 943e541768bd..c22bf5c827e7 100644
> > --- a/drivers/media/platform/nxp/imx7-media-csi.c
> > +++ b/drivers/media/platform/nxp/imx7-media-csi.c
> > @@ -211,7 +211,6 @@ struct imx7_csi {
> > int irq;
> > struct clk *mclk;
> >
> > - struct mutex lock; /* Protects is_streaming, format_mbus, cc */
> > spinlock_t irqlock; /* Protects last_eof */
> >
> > /* Media and V4L2 device */
> > @@ -227,8 +226,6 @@ struct imx7_csi {
> > struct v4l2_subdev sd;
> > struct media_pad pad[IMX7_CSI_PADS_NUM];
> >
> > - struct v4l2_mbus_framefmt format_mbus[IMX7_CSI_PADS_NUM];
> > -
> > /* Video device */
> > struct video_device *vdev; /* Video device */
> > struct media_pad vdev_pad; /* Video device pad */
> > @@ -509,7 +506,8 @@ static void imx7_csi_dma_stop(struct imx7_csi *csi)
> > imx7_csi_hw_disable_irq(csi);
> > }
> >
> > -static void imx7_csi_configure(struct imx7_csi *csi)
> > +static void imx7_csi_configure(struct imx7_csi *csi,
> > + struct v4l2_subdev_state *sd_state)
> > {
> > struct v4l2_pix_format *out_pix = &csi->vdev_fmt;
> > int width = out_pix->width;
> > @@ -540,12 +538,17 @@ static void imx7_csi_configure(struct imx7_csi *csi)
> > out_pix->pixelformat == V4L2_PIX_FMT_YUYV)
> > width *= 2;
> > } else {
> > + const struct v4l2_mbus_framefmt *sink_fmt;
> > +
> > + sink_fmt = v4l2_subdev_get_pad_format(&csi->sd, sd_state,
> > + IMX7_CSI_PAD_SINK);
> > +
> > cr1 = BIT_SOF_POL | BIT_REDGE | BIT_HSYNC_POL | BIT_FCC
> > | BIT_MCLKDIV(1) | BIT_MCLKEN;
> >
> > cr18 |= BIT_DATA_FROM_MIPI;
> >
> > - switch (csi->format_mbus[IMX7_CSI_PAD_SINK].code) {
> > + switch (sink_fmt->code) {
> > case MEDIA_BUS_FMT_Y8_1X8:
> > case MEDIA_BUS_FMT_SBGGR8_1X8:
> > case MEDIA_BUS_FMT_SGBRG8_1X8:
> > @@ -626,7 +629,8 @@ static void imx7_csi_configure(struct imx7_csi *csi)
> > imx7_csi_reg_write(csi, stride, CSI_CSIFBUF_PARA);
> > }
> >
> > -static int imx7_csi_init(struct imx7_csi *csi)
> > +static int imx7_csi_init(struct imx7_csi *csi,
> > + struct v4l2_subdev_state *sd_state)
> > {
> > int ret;
> >
> > @@ -634,7 +638,7 @@ static int imx7_csi_init(struct imx7_csi *csi)
> > if (ret < 0)
> > return ret;
> >
> > - imx7_csi_configure(csi);
> > + imx7_csi_configure(csi, sd_state);
> >
> > ret = imx7_csi_dma_setup(csi);
> > if (ret < 0) {
> > @@ -1420,7 +1424,7 @@ static int imx7_csi_video_validate_fmt(struct imx7_csi *csi)
> > int ret;
> >
> > /* Retrieve the media bus format on the source subdev. */
> > - ret = v4l2_subdev_call(&csi->sd, pad, get_fmt, NULL, &fmt_src);
> > + ret = v4l2_subdev_call_state_active(&csi->sd, pad, get_fmt, &fmt_src);
> > if (ret)
> > return ret;
> >
> > @@ -1728,12 +1732,13 @@ static int imx7_csi_video_init(struct imx7_csi *csi)
> > static int imx7_csi_s_stream(struct v4l2_subdev *sd, int enable)
> > {
> > struct imx7_csi *csi = v4l2_get_subdevdata(sd);
> > + struct v4l2_subdev_state *sd_state;
> > int ret = 0;
> >
> > - mutex_lock(&csi->lock);
> > + sd_state = v4l2_subdev_lock_and_get_active_state(sd);
> >
> > if (enable) {
> > - ret = imx7_csi_init(csi);
> > + ret = imx7_csi_init(csi, sd_state);
> > if (ret < 0)
> > goto out_unlock;
> >
> > @@ -1755,29 +1760,14 @@ static int imx7_csi_s_stream(struct v4l2_subdev *sd, int enable)
> > csi->is_streaming = !!enable;
> >
> > out_unlock:
> > - mutex_unlock(&csi->lock);
> > + v4l2_subdev_unlock_state(sd_state);
> >
> > return ret;
> > }
> >
> > -static struct v4l2_mbus_framefmt *
> > -imx7_csi_get_format(struct imx7_csi *csi,
> > - struct v4l2_subdev_state *sd_state,
> > - unsigned int pad,
> > - enum v4l2_subdev_format_whence which)
> > -{
> > - if (which == V4L2_SUBDEV_FORMAT_TRY)
> > - return v4l2_subdev_get_try_format(&csi->sd, sd_state, pad);
> > -
> > - return &csi->format_mbus[pad];
> > -}
> > -
> > static int imx7_csi_init_cfg(struct v4l2_subdev *sd,
> > struct v4l2_subdev_state *sd_state)
> > {
> > - const enum v4l2_subdev_format_whence which =
> > - sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
> > - struct imx7_csi *csi = v4l2_get_subdevdata(sd);
> > const struct imx7_csi_pixfmt *cc;
> > int i;
> >
> > @@ -1785,7 +1775,7 @@ static int imx7_csi_init_cfg(struct v4l2_subdev *sd,
> >
> > for (i = 0; i < IMX7_CSI_PADS_NUM; i++) {
> > struct v4l2_mbus_framefmt *mf =
> > - imx7_csi_get_format(csi, sd_state, i, which);
> > + v4l2_subdev_get_pad_format(sd, sd_state, i);
> >
> > mf->code = IMX7_CSI_DEF_MBUS_CODE;
> > mf->width = IMX7_CSI_DEF_PIX_WIDTH;
> > @@ -1806,59 +1796,30 @@ static int imx7_csi_enum_mbus_code(struct v4l2_subdev *sd,
> > struct v4l2_subdev_state *sd_state,
> > struct v4l2_subdev_mbus_code_enum *code)
> > {
> > - struct imx7_csi *csi = v4l2_get_subdevdata(sd);
> > struct v4l2_mbus_framefmt *in_fmt;
> > int ret = 0;
> >
> > - mutex_lock(&csi->lock);
> > -
> > - in_fmt = imx7_csi_get_format(csi, sd_state, IMX7_CSI_PAD_SINK,
> > - code->which);
> > + in_fmt = v4l2_subdev_get_pad_format(sd, sd_state, IMX7_CSI_PAD_SINK);
> >
> > switch (code->pad) {
> > case IMX7_CSI_PAD_SINK:
> > ret = imx7_csi_enum_mbus_formats(&code->code, code->index);
> > break;
> > +
> > case IMX7_CSI_PAD_SRC:
> > if (code->index != 0) {
> > ret = -EINVAL;
> > - goto out_unlock;
> > + break;
> > }
> >
> > code->code = in_fmt->code;
> > break;
> > +
> > default:
> > ret = -EINVAL;
> > + break;
> > }
> >
> > -out_unlock:
> > - mutex_unlock(&csi->lock);
> > -
> > - return ret;
> > -}
> > -
> > -static int imx7_csi_get_fmt(struct v4l2_subdev *sd,
> > - struct v4l2_subdev_state *sd_state,
> > - struct v4l2_subdev_format *sdformat)
> > -{
> > - struct imx7_csi *csi = v4l2_get_subdevdata(sd);
> > - struct v4l2_mbus_framefmt *fmt;
> > - int ret = 0;
> > -
> > - mutex_lock(&csi->lock);
> > -
> > - fmt = imx7_csi_get_format(csi, sd_state, sdformat->pad,
> > - sdformat->which);
> > - if (!fmt) {
> > - ret = -EINVAL;
> > - goto out_unlock;
> > - }
> > -
> > - sdformat->format = *fmt;
> > -
> > -out_unlock:
> > - mutex_unlock(&csi->lock);
> > -
> > return ret;
> > }
> >
> > @@ -1908,19 +1869,16 @@ static void imx7_csi_try_colorimetry(struct v4l2_mbus_framefmt *tryfmt)
> > tryfmt->ycbcr_enc);
> > }
> >
> > -static int imx7_csi_try_fmt(struct imx7_csi *csi,
> > - struct v4l2_subdev_state *sd_state,
> > - struct v4l2_subdev_format *sdformat,
> > - const struct imx7_csi_pixfmt **cc)
> > +static void imx7_csi_try_fmt(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *sd_state,
> > + struct v4l2_subdev_format *sdformat,
> > + const struct imx7_csi_pixfmt **cc)
> > {
> > const struct imx7_csi_pixfmt *in_cc;
> > struct v4l2_mbus_framefmt *in_fmt;
> > u32 code;
> >
> > - in_fmt = imx7_csi_get_format(csi, sd_state, IMX7_CSI_PAD_SINK,
> > - sdformat->which);
> > - if (!in_fmt)
> > - return -EINVAL;
> > + in_fmt = v4l2_subdev_get_pad_format(sd, sd_state, IMX7_CSI_PAD_SINK);
> >
> > switch (sdformat->pad) {
> > case IMX7_CSI_PAD_SRC:
> > @@ -1952,8 +1910,6 @@ static int imx7_csi_try_fmt(struct imx7_csi *csi,
> > }
> >
> > imx7_csi_try_colorimetry(&sdformat->format);
> > -
> > - return 0;
> > }
> >
> > static int imx7_csi_set_fmt(struct v4l2_subdev *sd,
> > @@ -1966,25 +1922,13 @@ static int imx7_csi_set_fmt(struct v4l2_subdev *sd,
> > const struct imx7_csi_pixfmt *cc;
> > struct v4l2_mbus_framefmt *fmt;
> > struct v4l2_subdev_format format;
> > - int ret = 0;
> >
> > - mutex_lock(&csi->lock);
> > + if (csi->is_streaming)
> > + return -EBUSY;
>
> Do you still need this or the state is locked by s_stream() and if I'm
> not mistaken the core locks the state before calling the op ?
The lock protects .set_fmt() racing with .s_stream(), but it doesn't
prevent .set_fmt() from being called while the stream is active, after
.s_stream() has returned. I think this should be handled by the subdev
core, but at the moment it isn't.
> > - if (csi->is_streaming) {
> > - ret = -EBUSY;
> > - goto out_unlock;
> > - }
> > + imx7_csi_try_fmt(sd, sd_state, sdformat, &cc);
> >
> > - ret = imx7_csi_try_fmt(csi, sd_state, sdformat, &cc);
> > - if (ret < 0)
> > - goto out_unlock;
> > -
> > - fmt = imx7_csi_get_format(csi, sd_state, sdformat->pad,
> > - sdformat->which);
> > - if (!fmt) {
> > - ret = -EINVAL;
> > - goto out_unlock;
> > - }
> > + fmt = v4l2_subdev_get_pad_format(sd, sd_state, sdformat->pad);
> >
> > *fmt = sdformat->format;
> >
> > @@ -1993,19 +1937,14 @@ static int imx7_csi_set_fmt(struct v4l2_subdev *sd,
> > format.pad = IMX7_CSI_PAD_SRC;
> > format.which = sdformat->which;
> > format.format = sdformat->format;
> > - if (imx7_csi_try_fmt(csi, sd_state, &format, &outcc)) {
> > - ret = -EINVAL;
> > - goto out_unlock;
> > - }
> > - outfmt = imx7_csi_get_format(csi, sd_state, IMX7_CSI_PAD_SRC,
> > - sdformat->which);
> > + imx7_csi_try_fmt(sd, sd_state, &format, &outcc);
> > +
> > + outfmt = v4l2_subdev_get_pad_format(sd, sd_state,
> > + IMX7_CSI_PAD_SRC);
> > *outfmt = format.format;
> > }
> >
> > -out_unlock:
> > - mutex_unlock(&csi->lock);
> > -
> > - return ret;
> > + return 0;
> > }
> >
> > static int imx7_csi_pad_link_validate(struct v4l2_subdev *sd,
> > @@ -2105,7 +2044,7 @@ static const struct v4l2_subdev_video_ops imx7_csi_video_ops = {
> > static const struct v4l2_subdev_pad_ops imx7_csi_pad_ops = {
> > .init_cfg = imx7_csi_init_cfg,
> > .enum_mbus_code = imx7_csi_enum_mbus_code,
> > - .get_fmt = imx7_csi_get_fmt,
> > + .get_fmt = v4l2_subdev_get_fmt,
> > .set_fmt = imx7_csi_set_fmt,
> > .link_validate = imx7_csi_pad_link_validate,
> > };
> > @@ -2199,6 +2138,7 @@ static void imx7_csi_media_cleanup(struct imx7_csi *csi)
> > {
> > v4l2_device_unregister(&csi->v4l2_dev);
> > media_device_unregister(&csi->mdev);
> > + v4l2_subdev_cleanup(&csi->sd);
> > media_device_cleanup(&csi->mdev);
> > }
> >
> > @@ -2266,6 +2206,10 @@ static int imx7_csi_media_init(struct imx7_csi *csi)
> > if (ret)
> > goto error;
> >
> > + ret = v4l2_subdev_init_finalize(&csi->sd);
> > + if (ret)
> > + goto error;
> > +
> > ret = v4l2_device_register_subdev(&csi->v4l2_dev, &csi->sd);
> > if (ret)
> > goto error;
> > @@ -2291,27 +2235,22 @@ static int imx7_csi_probe(struct platform_device *pdev)
> > platform_set_drvdata(pdev, csi);
> >
> > spin_lock_init(&csi->irqlock);
> > - mutex_init(&csi->lock);
> >
> > /* Acquire resources and install interrupt handler. */
> > csi->mclk = devm_clk_get(&pdev->dev, "mclk");
> > if (IS_ERR(csi->mclk)) {
> > ret = PTR_ERR(csi->mclk);
> > dev_err(dev, "Failed to get mclk: %d", ret);
> > - goto destroy_mutex;
> > + return ret;
> > }
> >
> > csi->irq = platform_get_irq(pdev, 0);
> > - if (csi->irq < 0) {
> > - ret = csi->irq;
> > - goto destroy_mutex;
> > - }
> > + if (csi->irq < 0)
> > + return csi->irq;
> >
> > csi->regbase = devm_platform_ioremap_resource(pdev, 0);
> > - if (IS_ERR(csi->regbase)) {
> > - ret = PTR_ERR(csi->regbase);
> > - goto destroy_mutex;
> > - }
> > + if (IS_ERR(csi->regbase))
> > + return PTR_ERR(csi->regbase);
> >
> > csi->model = (enum imx_csi_model)(uintptr_t)of_device_get_match_data(&pdev->dev);
> >
> > @@ -2319,31 +2258,23 @@ static int imx7_csi_probe(struct platform_device *pdev)
> > (void *)csi);
> > if (ret < 0) {
> > dev_err(dev, "Request CSI IRQ failed.\n");
> > - goto destroy_mutex;
> > + return ret;
> > }
> >
> > /* Initialize all the media device infrastructure. */
> > ret = imx7_csi_media_init(csi);
> > if (ret)
> > - goto destroy_mutex;
> > -
> > - /* Set the default mbus formats. */
> > - ret = imx7_csi_init_cfg(&csi->sd, NULL);
> > - if (ret)
> > - goto media_cleanup;
> > + return ret;
> >
> > ret = imx7_csi_async_register(csi);
> > if (ret)
> > - goto media_cleanup;
> > + goto err_media_cleanup;
> >
> > return 0;
> >
> > -media_cleanup:
> > +err_media_cleanup:
> > imx7_csi_media_cleanup(csi);
> >
> > -destroy_mutex:
> > - mutex_destroy(&csi->lock);
> > -
> > return ret;
> > }
> >
> > @@ -2357,8 +2288,6 @@ static int imx7_csi_remove(struct platform_device *pdev)
> > v4l2_async_nf_cleanup(&csi->notifier);
> > v4l2_async_unregister_subdev(&csi->sd);
> >
> > - mutex_destroy(&csi->lock);
> > -
> > return 0;
> > }
> >
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2023-01-30 20:14 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-29 2:34 [PATCH v2 0/8] media: nxp: imx7-media-csi: Move to subdev active state Laurent Pinchart
2023-01-29 2:34 ` [PATCH v2 1/8] media: imx: imx7-media-csi: Drop imx7_csi.cc field Laurent Pinchart
2023-01-29 2:34 ` [PATCH v2 2/8] media: imx: imx7-media-csi: Simplify imx7_csi_video_init_format() Laurent Pinchart
2023-01-29 2:34 ` [PATCH v2 3/8] media: imx: imx7-media-csi: Drop unneeded check when starting streaming Laurent Pinchart
2023-01-29 2:34 ` [PATCH v2 4/8] media: imx: imx7-media-csi: Drop unneeded src_sd check Laurent Pinchart
2023-01-29 2:34 ` [PATCH v2 5/8] media: imx: imx7-media-csi: Drop unneeded pad checks Laurent Pinchart
2023-01-29 2:34 ` [PATCH v2 6/8] media: imx: imx7-media-csi: Cleanup errors in imx7_csi_async_register() Laurent Pinchart
2023-01-29 2:34 ` [PATCH v2 7/8] media: imx: imx7-media-csi: Zero format struct before calling .get_fmt() Laurent Pinchart
2023-01-29 2:34 ` [PATCH v2 8/8] media: imx: imx7-media-csi: Use V4L2 subdev active state Laurent Pinchart
2023-01-30 19:26 ` Jacopo Mondi
2023-01-30 20:14 ` Laurent Pinchart [this message]
2023-01-30 23:45 ` [PATCH v2 0/8] media: nxp: imx7-media-csi: Move to " Adam Ford
2023-01-31 9:30 ` Rui Miguel Silva
2023-01-31 10:17 ` Martin Kepplinger
2023-01-31 10:24 ` Laurent Pinchart
2023-01-31 11:18 ` Martin Kepplinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y9glJgXTnuAmwdG+@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=aford173@gmail.com \
--cc=jacopo.mondi@ideasonboard.com \
--cc=kernel@pengutronix.de \
--cc=linux-imx@nxp.com \
--cc=linux-media@vger.kernel.org \
--cc=martin.kepplinger@puri.sm \
--cc=paul.elder@ideasonboard.com \
--cc=rmfrfs@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox