public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Rui Miguel Silva <rmfrfs@gmail.com>
Cc: linux-media@vger.kernel.org,
	Steve Longerbeam <slongerbeam@gmail.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Paul Elder <paul.elder@ideasonboard.com>,
	Jacopo Mondi <jacopo@jmondi.org>,
	kernel@pengutronix.de, linux-imx@nxp.com
Subject: Re: [PATCH 2/6] media: imx: Unstage the imx7-media-csi driver
Date: Thu, 8 Sep 2022 18:18:04 +0300	[thread overview]
Message-ID: <YxoHrK7Y8eMHY7Po@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20220908150627.wm3na2n4x37hf2x3@arch-thunder>

Hi Rui,

On Thu, Sep 08, 2022 at 04:06:27PM +0100, Rui Miguel Silva wrote:
> Hi Laurent,
> Thanks for doing this work.
> 
> On Wed, Sep 07, 2022 at 11:04:20PM +0300, Laurent Pinchart wrote:
> > The imx7-media-csi driver, currently in staging, is ready for
> > prime-time. The staging TODO file lists a few items specific to that
> > driver, that are already addressed (the "all of the above" part) or can
> > be addressed later:
> > 
> > - The frame interval monitoring support is a software mechanism to
> >   monitor the device for unexpected stalls, and should be part of the
> >   V4L2 core if desired.
> > 
> > - Restricting the support media bus formats based on the SoC integration
> >   only aims at reducing userspace confusion by not enumerating options
> >   that are known not to be possible, it won't cause regressions if
> >   handled later.
> > 
> > Move the description of the media bus format restriction TODO item to
> > the driver, drop the other TODO items, and move the driver out of
> > staging.
> > 
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> 
> For this imx7 work everything looks ok, with one exception:
> Need to update file entry in MAINTAINERS file.

Isn't it done below ?

> (also I noticed that
> there isn't an entry for the imx8 csi2 in that file also, but that is
> a different story).
> 
> With that fixed:
> 
> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
> 
> Cheers,
>    Rui
> 
> > ---
> >  MAINTAINERS                                   |  2 +-
> >  drivers/media/platform/nxp/Kconfig            | 13 +++++++++
> >  drivers/media/platform/nxp/Makefile           |  1 +
> >  .../platform/nxp}/imx7-media-csi.c            | 24 +++++++++++++++
> >  drivers/staging/media/imx/Kconfig             |  7 -----
> >  drivers/staging/media/imx/Makefile            |  1 -
> >  drivers/staging/media/imx/TODO                | 29 -------------------
> >  7 files changed, 39 insertions(+), 38 deletions(-)
> >  rename drivers/{staging/media/imx => media/platform/nxp}/imx7-media-csi.c (97%)
> > 
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 338c155f60ef..1dfa1d51955c 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -12595,7 +12595,7 @@ F:	Documentation/admin-guide/media/imx7.rst
> >  F:	Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml
> >  F:	Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
> >  F:	drivers/media/platform/nxp/imx-mipi-csis.c
> > -F:	drivers/staging/media/imx/imx7-media-csi.c
> > +F:	drivers/media/platform/nxp/imx7-media-csi.c

Right here ?

> >  MEDIA DRIVERS FOR HELENE
> >  M:	Abylay Ospan <aospan@netup.ru>
> > diff --git a/drivers/media/platform/nxp/Kconfig b/drivers/media/platform/nxp/Kconfig
> > index 1ac0a6e91111..3aa4207bcd41 100644
> > --- a/drivers/media/platform/nxp/Kconfig
> > +++ b/drivers/media/platform/nxp/Kconfig
> > @@ -4,6 +4,19 @@
> >  
> >  comment "NXP media platform drivers"
> >  
> > +config VIDEO_IMX7_CSI
> > +	tristate "NXP CSI Bridge driver"
> > +	depends on ARCH_MXC || COMPILE_TEST
> > +	depends on HAS_DMA
> > +	depends on VIDEO_DEV
> > +	select MEDIA_CONTROLLER
> > +	select V4L2_FWNODE
> > +	select VIDEOBUF2_DMA_CONTIG
> > +	select VIDEO_V4L2_SUBDEV_API
> > +	help
> > +	  Driver for the NXP Camera Sensor Interface (CSI) Bridge. This device
> > +	  is found in the i.MX6UL/L, i.MX7 and i.MX8M[MQ] SoCs.
> > +
> >  config VIDEO_IMX_MIPI_CSIS
> >  	tristate "NXP MIPI CSI-2 CSIS receiver found on i.MX7 and i.MX8 models"
> >  	depends on ARCH_MXC || COMPILE_TEST
> > diff --git a/drivers/media/platform/nxp/Makefile b/drivers/media/platform/nxp/Makefile
> > index efc38c6578ce..92cb8f4c215e 100644
> > --- a/drivers/media/platform/nxp/Makefile
> > +++ b/drivers/media/platform/nxp/Makefile
> > @@ -2,6 +2,7 @@
> >  
> >  obj-y += imx-jpeg/
> >  
> > +obj-$(CONFIG_VIDEO_IMX7_CSI) += imx7-media-csi.o
> >  obj-$(CONFIG_VIDEO_IMX_MIPI_CSIS) += imx-mipi-csis.o
> >  obj-$(CONFIG_VIDEO_IMX_PXP) += imx-pxp.o
> >  obj-$(CONFIG_VIDEO_MX2_EMMAPRP) += mx2_emmaprp.o
> > diff --git a/drivers/staging/media/imx/imx7-media-csi.c b/drivers/media/platform/nxp/imx7-media-csi.c
> > similarity index 97%
> > rename from drivers/staging/media/imx/imx7-media-csi.c
> > rename to drivers/media/platform/nxp/imx7-media-csi.c
> > index 21d6e56ffcd4..72de9fc9862a 100644
> > --- a/drivers/staging/media/imx/imx7-media-csi.c
> > +++ b/drivers/media/platform/nxp/imx7-media-csi.c
> > @@ -807,6 +807,30 @@ static irqreturn_t imx7_csi_irq_handler(int irq, void *data)
> >   * List of supported pixel formats for the subdevs. Keep V4L2_PIX_FMT_UYVY and
> >   * MEDIA_BUS_FMT_UYVY8_2X8 first to match IMX7_CSI_DEF_PIX_FORMAT and
> >   * IMX7_CSI_DEF_MBUS_CODE.
> > + *
> > + * TODO: Restrict the supported formats list based on the SoC integration.
> > + *
> > + * The CSI bridge can be configured to sample pixel components from the Rx queue
> > + * in single (8bpp) or double (16bpp) component modes. Image format variants
> > + * with different sample sizes (ie YUYV_2X8 vs YUYV_1X16) determine the pixel
> > + * components sampling size per each clock cycle and their packing mode (see
> > + * imx7_csi_configure() for details).
> > + *
> > + * As the CSI bridge can be interfaced with different IP blocks depending on the
> > + * SoC model it is integrated on, the Rx queue sampling size should match the
> > + * size of the samples transferred by the transmitting IP block. To avoid
> > + * misconfigurations of the capture pipeline, the enumeration of the supported
> > + * formats should be restricted to match the pixel source transmitting mode.
> > + *
> > + * Example: i.MX8MM SoC integrates the CSI bridge with the Samsung CSIS CSI-2
> > + * receiver which operates in dual pixel sampling mode. The CSI bridge should
> > + * only expose the 1X16 formats variant which instructs it to operate in dual
> > + * pixel sampling mode. When the CSI bridge is instead integrated on an i.MX7,
> > + * which supports both serial and parallel input, it should expose both
> > + * variants.
> > + *
> > + * This currently only applies to YUYV formats, but other formats might need to
> > + * be handled in the same way.
> >   */
> >  static const struct imx7_csi_pixfmt pixel_formats[] = {
> >  	/*** YUV formats start here ***/
> > diff --git a/drivers/staging/media/imx/Kconfig b/drivers/staging/media/imx/Kconfig
> > index bfb849701489..21fd79515042 100644
> > --- a/drivers/staging/media/imx/Kconfig
> > +++ b/drivers/staging/media/imx/Kconfig
> > @@ -23,13 +23,6 @@ config VIDEO_IMX_CSI
> >  	default y
> >  	help
> >  	  A video4linux camera sensor interface driver for i.MX5/6.
> > -
> > -config VIDEO_IMX7_CSI
> > -	tristate "i.MX6UL/L / i.MX7 / i.MX8M Camera Sensor Interface driver"
> > -	default y
> > -	help
> > -	  Enable support for video4linux camera sensor interface driver for
> > -	  i.MX6UL/L, i.MX7 or i.MX8M.
> >  endmenu
> >  endif
> >  
> > diff --git a/drivers/staging/media/imx/Makefile b/drivers/staging/media/imx/Makefile
> > index cef9f30eb401..906a422aa656 100644
> > --- a/drivers/staging/media/imx/Makefile
> > +++ b/drivers/staging/media/imx/Makefile
> > @@ -14,5 +14,4 @@ obj-$(CONFIG_VIDEO_IMX_CSI) += imx6-media.o
> >  obj-$(CONFIG_VIDEO_IMX_CSI) += imx6-media-csi.o
> >  obj-$(CONFIG_VIDEO_IMX_CSI) += imx6-mipi-csi2.o
> >  
> > -obj-$(CONFIG_VIDEO_IMX7_CSI) += imx7-media-csi.o
> >  obj-$(CONFIG_VIDEO_IMX8MQ_MIPI_CSI2) += imx8mq-mipi-csi2.o
> > diff --git a/drivers/staging/media/imx/TODO b/drivers/staging/media/imx/TODO
> > index 5d3a337c8702..afee26870af7 100644
> > --- a/drivers/staging/media/imx/TODO
> > +++ b/drivers/staging/media/imx/TODO
> > @@ -23,32 +23,3 @@
> >  - Similarly to the legacy control handling, legacy format handling where
> >    formats on the video nodes are influenced by the active format of the
> >    connected subdev should be removed.
> > -
> > -- i.MX7: all of the above, since it uses the imx media core
> > -
> > -- i.MX7: use Frame Interval Monitor
> > -
> > -- imx7-media-csi: Restrict the supported formats list to the SoC version.
> > -
> > -  The imx7 CSI bridge can be configured to sample pixel components from the Rx
> > -  queue in single (8bpp) or double (16bpp) component modes. Image format
> > -  variants with different sample sizes (ie YUYV_2X8 vs YUYV_1X16) determine the
> > -  pixel components sampling size per each clock cycle and their packing mode
> > -  (see imx7_csi_configure() for details).
> > -
> > -  As the imx7 CSI bridge can be interfaced with different IP blocks depending on
> > -  the SoC model it is integrated on, the Rx queue sampling size should match
> > -  the size of the samples transferred by the transmitting IP block.
> > -
> > -  To avoid mis-configurations of the capture pipeline, the enumeration of the
> > -  supported formats should be restricted to match the pixel source transmitting
> > -  mode.
> > -
> > -  Example: i.MX8MM SoC integrates the CSI bridge with the Samsung CSIS CSI-2
> > -  receiver which operates in dual pixel sampling mode. The CSI bridge should
> > -  only expose the 1X16 formats variant which instructs it to operate in dual
> > -  pixel sampling mode. When the CSI bridge is instead integrated on an i.MX7,
> > -  which supports both serial and parallel input, it should expose both variants.
> > -
> > -  This currently only applies to YUYV formats, but other formats might need
> > -  to be handled in the same way.
> > -- 
> > Regards,
> > 
> > Laurent Pinchart
> > 

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2022-09-08 15:18 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-07 20:04 [PATCH 0/6] media: imx: imx7-media-csi: Destage driver Laurent Pinchart
2022-09-07 20:04 ` [PATCH 1/6] media: imx: Decouple imx8mq-mipi-csi2 from imx7-media-csi Laurent Pinchart
2022-09-08  3:58   ` paul.elder
2022-09-09 18:22   ` Laurent Pinchart
2022-09-13 15:10     ` Martin Kepplinger
2022-09-13 15:26       ` Laurent Pinchart
2022-09-07 20:04 ` [PATCH 2/6] media: imx: Unstage the imx7-media-csi driver Laurent Pinchart
2022-09-08  4:04   ` paul.elder
2022-09-08 15:06   ` Rui Miguel Silva
2022-09-08 15:18     ` Laurent Pinchart [this message]
2022-09-08 15:46       ` Rui Miguel Silva
2022-09-07 20:04 ` [PATCH 3/6] staging: media: imx: Drop imx_media_subdev_bound() Laurent Pinchart
2022-09-08  4:08   ` paul.elder
2022-09-07 20:04 ` [PATCH 4/6] staging: media: imx: Drop IMX_MEDIA_GRP_ID_CSI Laurent Pinchart
2022-09-08  4:10   ` paul.elder
2022-09-07 20:04 ` [PATCH 5/6] staging: media: imx: Drop unused helper functions Laurent Pinchart
2022-09-08  4:12   ` paul.elder
2022-09-07 20:04 ` [PATCH 6/6] staging: media: imx: Make imx_media_of_add_csi() static Laurent Pinchart
2022-09-08  4:16   ` paul.elder
2022-09-13  9:48 ` [PATCH 0/6] media: imx: imx7-media-csi: Destage driver Alexander Stein

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YxoHrK7Y8eMHY7Po@pendragon.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=jacopo@jmondi.org \
    --cc=kernel@pengutronix.de \
    --cc=linux-imx@nxp.com \
    --cc=linux-media@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=paul.elder@ideasonboard.com \
    --cc=rmfrfs@gmail.com \
    --cc=slongerbeam@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox