[PATCH AUTOSEL 6.3 13/44] media: imx-jpeg: Bounds check sizeimage access

[PATCH AUTOSEL 6.3 13/44] media: imx-jpeg: Bounds check sizeimage access

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit 474acc639fc8671fa4c1919d9e03253c82b6d321 ]

The call of mxc_jpeg_get_plane_size() from mxc_jpeg_dec_irq() sets
plane_no argument to 1. The compiler sees that it's possible to end up
with an access beyond the bounds of sizeimage, if mem_planes was too
large:

        if (plane_no >= fmt->mem_planes)        // mem_planes = 2+
                return 0;

        if (fmt->mem_planes == fmt->comp_planes) // comp_planes != mem_planes
                return q_data->sizeimage[plane_no];

        if (plane_no < fmt->mem_planes - 1)     // mem_planes = 2
                return q_data->sizeimage[plane_no];

comp_planes == 0 or 1 is safe. comp_planes > 2 would be out of bounds.

(This isn't currently possible given the contents of mxc_formats, though.)

Silence the warning by bounds checking comp_planes for future
robustness. Seen with GCC 13:

In function 'mxc_jpeg_get_plane_size',
    inlined from 'mxc_jpeg_dec_irq' at ../drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c:729:14:
../drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c:641:42: warning: array subscript 2 is above array bounds of 'u32[2]' {aka 'unsigned int[2]'} [-Warray-bounds=]
  641 |                 size += q_data->sizeimage[i];
      |                         ~~~~~~~~~~~~~~~~~^~~
In file included from ../drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.h:112,
                 from ../drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c:63:
../drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.h: In function 'mxc_jpeg_dec_irq':
../drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.h:84:41: note: while referencing 'sizeimage'
   84 |         u32                             sizeimage[MXC_JPEG_MAX_PLANES];
      |                                         ^~~~~~~~~

Cc: Mirela Rabulea <mirela.rabulea@nxp.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c
index f085f14d676ad..c898116b763a2 100644
--- a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c
+++ b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c
@@ -637,6 +637,11 @@ static u32 mxc_jpeg_get_plane_size(struct mxc_jpeg_q_data *q_data, u32 plane_no)
 		return q_data->sizeimage[plane_no];
 
 	size = q_data->sizeimage[fmt->mem_planes - 1];
+
+	/* Should be impossible given mxc_formats. */
+	if (WARN_ON_ONCE(fmt->comp_planes > ARRAY_SIZE(q_data->sizeimage)))
+		return size;
+
 	for (i = fmt->mem_planes; i < fmt->comp_planes; i++)
 		size += q_data->sizeimage[i];
 
-- 
2.39.2

[PATCH AUTOSEL 6.3 14/44] media: cx23885: Fix a null-ptr-deref bug in buffer_prepare() and buffer_finish()

[Sasha Levin]

From: harperchen <harperchen1110@gmail.com>

[ Upstream commit 47e8b73bc35d7c54642f78e498697692f6358996 ]

When the driver calls cx23885_risc_buffer() to prepare the buffer, the
function call dma_alloc_coherent may fail, resulting in a empty buffer
risc->cpu. Later when we free the buffer or access the buffer, null ptr
deref is triggered.

This bug is similar to the following one:
https://git.linuxtv.org/media_stage.git/commit/?id=2b064d91440b33fba5b452f2d1b31f13ae911d71.

We believe the bug can be also dynamically triggered from user side.
Similarly, we fix this by checking the return value of cx23885_risc_buffer()
and the value of risc->cpu before buffer free.

Signed-off-by: harperchen <harperchen1110@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/cx23885/cx23885-core.c  |  4 +++-
 drivers/media/pci/cx23885/cx23885-video.c | 13 +++++++------
 2 files changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/media/pci/cx23885/cx23885-core.c b/drivers/media/pci/cx23885/cx23885-core.c
index 9232a966bcabb..2ce2914576cf2 100644
--- a/drivers/media/pci/cx23885/cx23885-core.c
+++ b/drivers/media/pci/cx23885/cx23885-core.c
@@ -1325,7 +1325,9 @@ void cx23885_free_buffer(struct cx23885_dev *dev, struct cx23885_buffer *buf)
 {
 	struct cx23885_riscmem *risc = &buf->risc;
 
-	dma_free_coherent(&dev->pci->dev, risc->size, risc->cpu, risc->dma);
+	if (risc->cpu)
+		dma_free_coherent(&dev->pci->dev, risc->size, risc->cpu, risc->dma);
+	memset(risc, 0, sizeof(*risc));
 }
 
 static void cx23885_tsport_reg_dump(struct cx23885_tsport *port)
diff --git a/drivers/media/pci/cx23885/cx23885-video.c b/drivers/media/pci/cx23885/cx23885-video.c
index 3d03f5e95786a..671fc0588e431 100644
--- a/drivers/media/pci/cx23885/cx23885-video.c
+++ b/drivers/media/pci/cx23885/cx23885-video.c
@@ -342,6 +342,7 @@ static int queue_setup(struct vb2_queue *q,
 
 static int buffer_prepare(struct vb2_buffer *vb)
 {
+	int ret;
 	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
 	struct cx23885_dev *dev = vb->vb2_queue->drv_priv;
 	struct cx23885_buffer *buf =
@@ -358,12 +359,12 @@ static int buffer_prepare(struct vb2_buffer *vb)
 
 	switch (dev->field) {
 	case V4L2_FIELD_TOP:
-		cx23885_risc_buffer(dev->pci, &buf->risc,
+		ret = cx23885_risc_buffer(dev->pci, &buf->risc,
 				sgt->sgl, 0, UNSET,
 				buf->bpl, 0, dev->height);
 		break;
 	case V4L2_FIELD_BOTTOM:
-		cx23885_risc_buffer(dev->pci, &buf->risc,
+		ret = cx23885_risc_buffer(dev->pci, &buf->risc,
 				sgt->sgl, UNSET, 0,
 				buf->bpl, 0, dev->height);
 		break;
@@ -391,21 +392,21 @@ static int buffer_prepare(struct vb2_buffer *vb)
 			line0_offset = 0;
 			line1_offset = buf->bpl;
 		}
-		cx23885_risc_buffer(dev->pci, &buf->risc,
+		ret = cx23885_risc_buffer(dev->pci, &buf->risc,
 				sgt->sgl, line0_offset,
 				line1_offset,
 				buf->bpl, buf->bpl,
 				dev->height >> 1);
 		break;
 	case V4L2_FIELD_SEQ_TB:
-		cx23885_risc_buffer(dev->pci, &buf->risc,
+		ret = cx23885_risc_buffer(dev->pci, &buf->risc,
 				sgt->sgl,
 				0, buf->bpl * (dev->height >> 1),
 				buf->bpl, 0,
 				dev->height >> 1);
 		break;
 	case V4L2_FIELD_SEQ_BT:
-		cx23885_risc_buffer(dev->pci, &buf->risc,
+		ret = cx23885_risc_buffer(dev->pci, &buf->risc,
 				sgt->sgl,
 				buf->bpl * (dev->height >> 1), 0,
 				buf->bpl, 0,
@@ -418,7 +419,7 @@ static int buffer_prepare(struct vb2_buffer *vb)
 		buf, buf->vb.vb2_buf.index,
 		dev->width, dev->height, dev->fmt->depth, dev->fmt->fourcc,
 		(unsigned long)buf->risc.dma);
-	return 0;
+	return ret;
 }
 
 static void buffer_finish(struct vb2_buffer *vb)
-- 
2.39.2

[PATCH AUTOSEL 6.3 15/44] media: pci: tw68: Fix null-ptr-deref bug in buf prepare and finish

[Sasha Levin]

From: harperchen <harperchen1110@gmail.com>

[ Upstream commit 1634b7adcc5bef645b3666fdd564e5952a9e24e0 ]

When the driver calls tw68_risc_buffer() to prepare the buffer, the
function call dma_alloc_coherent may fail, resulting in a empty buffer
buf->cpu. Later when we free the buffer or access the buffer, null ptr
deref is triggered.

This bug is similar to the following one:
https://git.linuxtv.org/media_stage.git/commit/?id=2b064d91440b33fba5b452f2d1b31f13ae911d71.

We believe the bug can be also dynamically triggered from user side.
Similarly, we fix this by checking the return value of tw68_risc_buffer()
and the value of buf->cpu before buffer free.

Signed-off-by: harperchen <harperchen1110@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/tw68/tw68-video.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/media/pci/tw68/tw68-video.c b/drivers/media/pci/tw68/tw68-video.c
index 0cbc5b038073b..773a18702d369 100644
--- a/drivers/media/pci/tw68/tw68-video.c
+++ b/drivers/media/pci/tw68/tw68-video.c
@@ -437,6 +437,7 @@ static void tw68_buf_queue(struct vb2_buffer *vb)
  */
 static int tw68_buf_prepare(struct vb2_buffer *vb)
 {
+	int ret;
 	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
 	struct vb2_queue *vq = vb->vb2_queue;
 	struct tw68_dev *dev = vb2_get_drv_priv(vq);
@@ -452,30 +453,30 @@ static int tw68_buf_prepare(struct vb2_buffer *vb)
 	bpl = (dev->width * dev->fmt->depth) >> 3;
 	switch (dev->field) {
 	case V4L2_FIELD_TOP:
-		tw68_risc_buffer(dev->pci, buf, dma->sgl,
+		ret = tw68_risc_buffer(dev->pci, buf, dma->sgl,
 				 0, UNSET, bpl, 0, dev->height);
 		break;
 	case V4L2_FIELD_BOTTOM:
-		tw68_risc_buffer(dev->pci, buf, dma->sgl,
+		ret = tw68_risc_buffer(dev->pci, buf, dma->sgl,
 				 UNSET, 0, bpl, 0, dev->height);
 		break;
 	case V4L2_FIELD_SEQ_TB:
-		tw68_risc_buffer(dev->pci, buf, dma->sgl,
+		ret = tw68_risc_buffer(dev->pci, buf, dma->sgl,
 				 0, bpl * (dev->height >> 1),
 				 bpl, 0, dev->height >> 1);
 		break;
 	case V4L2_FIELD_SEQ_BT:
-		tw68_risc_buffer(dev->pci, buf, dma->sgl,
+		ret = tw68_risc_buffer(dev->pci, buf, dma->sgl,
 				 bpl * (dev->height >> 1), 0,
 				 bpl, 0, dev->height >> 1);
 		break;
 	case V4L2_FIELD_INTERLACED:
 	default:
-		tw68_risc_buffer(dev->pci, buf, dma->sgl,
+		ret = tw68_risc_buffer(dev->pci, buf, dma->sgl,
 				 0, bpl, bpl, bpl, dev->height >> 1);
 		break;
 	}
-	return 0;
+	return ret;
 }
 
 static void tw68_buf_finish(struct vb2_buffer *vb)
@@ -485,7 +486,8 @@ static void tw68_buf_finish(struct vb2_buffer *vb)
 	struct tw68_dev *dev = vb2_get_drv_priv(vq);
 	struct tw68_buf *buf = container_of(vbuf, struct tw68_buf, vb);
 
-	dma_free_coherent(&dev->pci->dev, buf->size, buf->cpu, buf->dma);
+	if (buf->cpu)
+		dma_free_coherent(&dev->pci->dev, buf->size, buf->cpu, buf->dma);
 }
 
 static int tw68_start_streaming(struct vb2_queue *q, unsigned int count)
-- 
2.39.2

[PATCH AUTOSEL 6.3 16/44] media: pvrusb2: VIDEO_PVRUSB2 depends on DVB_CORE to use dvb_* symbols

[Sasha Levin]

From: Tom Rix <trix@redhat.com>

[ Upstream commit 1107283b3351bef138cd12dbda1f999891cab7db ]

A rand config causes this link error
vmlinux.o: In function `pvr2_dvb_create':
(.text+0x8af1d2): undefined reference to `dvb_register_adapter'

The rand config has
CONFIG_VIDEO_PVRUSB2=y
CONFIG_VIDEO_DEV=y
CONFIG_DVB_CORE=m

VIDEO_PVRUSB2 should also depend on DVB_CORE.

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/pvrusb2/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/usb/pvrusb2/Kconfig b/drivers/media/usb/pvrusb2/Kconfig
index f2b64e49c5a20..9501b10b31aa5 100644
--- a/drivers/media/usb/pvrusb2/Kconfig
+++ b/drivers/media/usb/pvrusb2/Kconfig
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config VIDEO_PVRUSB2
 	tristate "Hauppauge WinTV-PVR USB2 support"
-	depends on VIDEO_DEV && I2C
+	depends on VIDEO_DEV && I2C && DVB_CORE
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_CX2341X
-- 
2.39.2

[PATCH AUTOSEL 6.3 34/44] media: cros-ec-cec: Don't exit early in .remove() callback

[Sasha Levin]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit 0ff7aee24e47beb4306ce050824b54147f2fabfa ]

Exiting early in remove without releasing all acquired resources yields
leaks. Note that e.g. memory allocated with devm_zalloc() is freed after
.remove() returns, even if the return code was negative.

While blocking_notifier_chain_unregister() won't fail and so the
change is somewhat cosmetic, platform driver's .remove callbacks are
about to be converted to return void. To prepare that, keep the error
message but don't return early.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/cec/platform/cros-ec/cros-ec-cec.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/media/cec/platform/cros-ec/cros-ec-cec.c b/drivers/media/cec/platform/cros-ec/cros-ec-cec.c
index 6ebedc71d67d4..960432230bbf1 100644
--- a/drivers/media/cec/platform/cros-ec/cros-ec-cec.c
+++ b/drivers/media/cec/platform/cros-ec/cros-ec-cec.c
@@ -332,14 +332,16 @@ static int cros_ec_cec_remove(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	int ret;
 
+	/*
+	 * blocking_notifier_chain_unregister() only fails if the notifier isn't
+	 * in the list. We know it was added to it by .probe(), so there should
+	 * be no need for error checking. Be cautious and still check.
+	 */
 	ret = blocking_notifier_chain_unregister(
 			&cros_ec_cec->cros_ec->event_notifier,
 			&cros_ec_cec->notifier);
-
-	if (ret) {
+	if (ret)
 		dev_err(dev, "failed to unregister notifier\n");
-		return ret;
-	}
 
 	cec_notifier_cec_adap_unregister(cros_ec_cec->notify,
 					 cros_ec_cec->adap);
-- 
2.39.2

Re: [PATCH AUTOSEL 6.3 34/44] media: cros-ec-cec: Don't exit early in .remove() callback

[Uwe Kleine-König]

[-- Attachment #1: Type: text/plain, Size: 1243 bytes --]

Hello,

On Sun, Apr 30, 2023 at 10:56:22PM -0400, Sasha Levin wrote:
> From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> 
> [ Upstream commit 0ff7aee24e47beb4306ce050824b54147f2fabfa ]
> 
> Exiting early in remove without releasing all acquired resources yields
> leaks. Note that e.g. memory allocated with devm_zalloc() is freed after
> .remove() returns, even if the return code was negative.
> 
> While blocking_notifier_chain_unregister() won't fail and so the
> change is somewhat cosmetic, platform driver's .remove callbacks are
> about to be converted to return void. To prepare that, keep the error
> message but don't return early.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

While I'm positive this change doesn't break anything, it also doesn't
fix anything and is only cosmetic (+ preparing a later change).

Unless you need it as a dependency I'd say, don't backport it for
stable.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH AUTOSEL 6.3 34/44] media: cros-ec-cec: Don't exit early in .remove() callback

[Sasha Levin]

On Mon, May 01, 2023 at 05:26:32PM +0200, Uwe Kleine-König wrote:
>Hello,
>
>On Sun, Apr 30, 2023 at 10:56:22PM -0400, Sasha Levin wrote:
>> From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
>>
>> [ Upstream commit 0ff7aee24e47beb4306ce050824b54147f2fabfa ]
>>
>> Exiting early in remove without releasing all acquired resources yields
>> leaks. Note that e.g. memory allocated with devm_zalloc() is freed after
>> .remove() returns, even if the return code was negative.
>>
>> While blocking_notifier_chain_unregister() won't fail and so the
>> change is somewhat cosmetic, platform driver's .remove callbacks are
>> about to be converted to return void. To prepare that, keep the error
>> message but don't return early.
>>
>> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
>> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>
>While I'm positive this change doesn't break anything, it also doesn't
>fix anything and is only cosmetic (+ preparing a later change).
>
>Unless you need it as a dependency I'd say, don't backport it for
>stable.

Ack, dropped. Thanks!

-- 
Thanks,
Sasha

[PATCH AUTOSEL 6.3 35/44] media: ipu3-cio2: support multiple sensors and VCMs with same HID

[Sasha Levin]

From: Bingbu Cao <bingbu.cao@intel.com>

[ Upstream commit 567f97bd381fd79fa8563808118fc757cb6fa4ff ]

In current cio2-bridge, it is using the hid name to register software
node and software node will create kobject and sysfs entry according to
the node name, if there are multiple sensors and VCMs which are sharing
same HID name, it will cause the software nodes registration failure:

sysfs: cannot create duplicate filename '/kernel/software_nodes/dw9714'
...
Call Trace:
software_node_register_nodes
cio2_bridge_init
...
kobject_add_internal failed for dw9714 with -EEXIST,
don't try to register things with the same name in the same directory.

One solution is appending the sensor link(Mipi Port) in SSDB as suffix
of the node name to fix this problem.

Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/intel/ipu3/cio2-bridge.c | 15 +++++++++++----
 drivers/media/pci/intel/ipu3/cio2-bridge.h |  3 ++-
 2 files changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/media/pci/intel/ipu3/cio2-bridge.c b/drivers/media/pci/intel/ipu3/cio2-bridge.c
index dfefe0d8aa959..45427a3a3a252 100644
--- a/drivers/media/pci/intel/ipu3/cio2-bridge.c
+++ b/drivers/media/pci/intel/ipu3/cio2-bridge.c
@@ -212,6 +212,7 @@ static void cio2_bridge_create_connection_swnodes(struct cio2_bridge *bridge,
 						  struct cio2_sensor *sensor)
 {
 	struct software_node *nodes = sensor->swnodes;
+	char vcm_name[ACPI_ID_LEN + 4];
 
 	cio2_bridge_init_swnode_names(sensor);
 
@@ -229,9 +230,13 @@ static void cio2_bridge_create_connection_swnodes(struct cio2_bridge *bridge,
 						sensor->node_names.endpoint,
 						&nodes[SWNODE_CIO2_PORT],
 						sensor->cio2_properties);
-	if (sensor->ssdb.vcmtype)
-		nodes[SWNODE_VCM] =
-			NODE_VCM(cio2_vcm_types[sensor->ssdb.vcmtype - 1]);
+	if (sensor->ssdb.vcmtype) {
+		/* append ssdb.link to distinguish VCM nodes with same HID */
+		snprintf(vcm_name, sizeof(vcm_name), "%s-%u",
+			 cio2_vcm_types[sensor->ssdb.vcmtype - 1],
+			 sensor->ssdb.link);
+		nodes[SWNODE_VCM] = NODE_VCM(vcm_name);
+	}
 
 	cio2_bridge_init_swnode_group(sensor);
 }
@@ -295,7 +300,6 @@ static int cio2_bridge_connect_sensor(const struct cio2_sensor_config *cfg,
 		}
 
 		sensor = &bridge->sensors[bridge->n_sensors];
-		strscpy(sensor->name, cfg->hid, sizeof(sensor->name));
 
 		ret = cio2_bridge_read_acpi_buffer(adev, "SSDB",
 						   &sensor->ssdb,
@@ -303,6 +307,9 @@ static int cio2_bridge_connect_sensor(const struct cio2_sensor_config *cfg,
 		if (ret)
 			goto err_put_adev;
 
+		snprintf(sensor->name, sizeof(sensor->name), "%s-%u",
+			 cfg->hid, sensor->ssdb.link);
+
 		if (sensor->ssdb.vcmtype > ARRAY_SIZE(cio2_vcm_types)) {
 			dev_warn(&adev->dev, "Unknown VCM type %d\n",
 				 sensor->ssdb.vcmtype);
diff --git a/drivers/media/pci/intel/ipu3/cio2-bridge.h b/drivers/media/pci/intel/ipu3/cio2-bridge.h
index b93b749c65bda..b76ed8a641e20 100644
--- a/drivers/media/pci/intel/ipu3/cio2-bridge.h
+++ b/drivers/media/pci/intel/ipu3/cio2-bridge.h
@@ -113,7 +113,8 @@ struct cio2_sensor_config {
 };
 
 struct cio2_sensor {
-	char name[ACPI_ID_LEN];
+	/* append ssdb.link(u8) in "-%u" format as suffix of HID */
+	char name[ACPI_ID_LEN + 4];
 	struct acpi_device *adev;
 	struct i2c_client *vcm_i2c_client;
 
-- 
2.39.2

[PATCH AUTOSEL 6.3 40/44] media: Prefer designated initializers over memset for subdev pad ops

[Sasha Levin]

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

[ Upstream commit e3a69496a1cde364c74a600d7a370179b58aed29 ]

Structures passed to subdev pad operations are all zero-initialized, but
not always with the same kind of code constructs. While most drivers
used designated initializers, which zero all the fields that are not
specified, when declaring variables, some use memset(). Those two
methods lead to the same end result, and, depending on compiler
optimizations, may even be completely equivalent, but they're not
consistent.

Improve coding style consistency by using designated initializers
instead of calling memset(). Where applicable, also move the variables
to inner scopes of for loops to ensure correct initialization in all
iterations.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com> # For am437x
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/renesas/vsp1/vsp1_drm.c | 18 +++++++++---------
 .../media/platform/renesas/vsp1/vsp1_entity.c  | 11 +++++------
 .../platform/samsung/exynos4-is/fimc-capture.c |  7 ++++---
 drivers/media/platform/ti/am437x/am437x-vpfe.c | 15 ++++++++-------
 drivers/media/platform/ti/cal/cal-video.c      |  8 ++++----
 drivers/media/usb/dvb-usb/cxusb-analog.c       | 14 +++++++-------
 drivers/staging/media/imx/imx-media-capture.c  | 12 ++++++------
 drivers/staging/media/imx/imx-media-utils.c    |  8 ++++----
 drivers/staging/media/omap4iss/iss_video.c     |  6 +++---
 9 files changed, 50 insertions(+), 49 deletions(-)

diff --git a/drivers/media/platform/renesas/vsp1/vsp1_drm.c b/drivers/media/platform/renesas/vsp1/vsp1_drm.c
index c6f25200982c8..7fe375b6322cd 100644
--- a/drivers/media/platform/renesas/vsp1/vsp1_drm.c
+++ b/drivers/media/platform/renesas/vsp1/vsp1_drm.c
@@ -66,7 +66,9 @@ static int vsp1_du_insert_uif(struct vsp1_device *vsp1,
 			      struct vsp1_entity *prev, unsigned int prev_pad,
 			      struct vsp1_entity *next, unsigned int next_pad)
 {
-	struct v4l2_subdev_format format;
+	struct v4l2_subdev_format format = {
+		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
+	};
 	int ret;
 
 	if (!uif) {
@@ -82,8 +84,6 @@ static int vsp1_du_insert_uif(struct vsp1_device *vsp1,
 	prev->sink = uif;
 	prev->sink_pad = UIF_PAD_SINK;
 
-	memset(&format, 0, sizeof(format));
-	format.which = V4L2_SUBDEV_FORMAT_ACTIVE;
 	format.pad = prev_pad;
 
 	ret = v4l2_subdev_call(&prev->subdev, pad, get_fmt, NULL, &format);
@@ -118,8 +118,12 @@ static int vsp1_du_pipeline_setup_rpf(struct vsp1_device *vsp1,
 				      struct vsp1_entity *uif,
 				      unsigned int brx_input)
 {
-	struct v4l2_subdev_selection sel;
-	struct v4l2_subdev_format format;
+	struct v4l2_subdev_selection sel = {
+		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
+	};
+	struct v4l2_subdev_format format = {
+		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
+	};
 	const struct v4l2_rect *crop;
 	int ret;
 
@@ -129,8 +133,6 @@ static int vsp1_du_pipeline_setup_rpf(struct vsp1_device *vsp1,
 	 */
 	crop = &vsp1->drm->inputs[rpf->entity.index].crop;
 
-	memset(&format, 0, sizeof(format));
-	format.which = V4L2_SUBDEV_FORMAT_ACTIVE;
 	format.pad = RWPF_PAD_SINK;
 	format.format.width = crop->width + crop->left;
 	format.format.height = crop->height + crop->top;
@@ -147,8 +149,6 @@ static int vsp1_du_pipeline_setup_rpf(struct vsp1_device *vsp1,
 		__func__, format.format.width, format.format.height,
 		format.format.code, rpf->entity.index);
 
-	memset(&sel, 0, sizeof(sel));
-	sel.which = V4L2_SUBDEV_FORMAT_ACTIVE;
 	sel.pad = RWPF_PAD_SINK;
 	sel.target = V4L2_SEL_TGT_CROP;
 	sel.r = *crop;
diff --git a/drivers/media/platform/renesas/vsp1/vsp1_entity.c b/drivers/media/platform/renesas/vsp1/vsp1_entity.c
index 4c3bd2b1ca287..c31f05a80bb56 100644
--- a/drivers/media/platform/renesas/vsp1/vsp1_entity.c
+++ b/drivers/media/platform/renesas/vsp1/vsp1_entity.c
@@ -184,15 +184,14 @@ vsp1_entity_get_pad_selection(struct vsp1_entity *entity,
 int vsp1_entity_init_cfg(struct v4l2_subdev *subdev,
 			 struct v4l2_subdev_state *sd_state)
 {
-	struct v4l2_subdev_format format;
 	unsigned int pad;
 
 	for (pad = 0; pad < subdev->entity.num_pads - 1; ++pad) {
-		memset(&format, 0, sizeof(format));
-
-		format.pad = pad;
-		format.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY
-			     : V4L2_SUBDEV_FORMAT_ACTIVE;
+		struct v4l2_subdev_format format = {
+			.pad = pad,
+			.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY
+			       : V4L2_SUBDEV_FORMAT_ACTIVE,
+		};
 
 		v4l2_subdev_call(subdev, pad, set_fmt, sd_state, &format);
 	}
diff --git a/drivers/media/platform/samsung/exynos4-is/fimc-capture.c b/drivers/media/platform/samsung/exynos4-is/fimc-capture.c
index e3b95a2b7e040..beaee54ee73bf 100644
--- a/drivers/media/platform/samsung/exynos4-is/fimc-capture.c
+++ b/drivers/media/platform/samsung/exynos4-is/fimc-capture.c
@@ -763,7 +763,10 @@ static int fimc_pipeline_try_format(struct fimc_ctx *ctx,
 	struct fimc_dev *fimc = ctx->fimc_dev;
 	struct fimc_pipeline *p = to_fimc_pipeline(fimc->vid_cap.ve.pipe);
 	struct v4l2_subdev *sd = p->subdevs[IDX_SENSOR];
-	struct v4l2_subdev_format sfmt;
+	struct v4l2_subdev_format sfmt = {
+		.which = set ? V4L2_SUBDEV_FORMAT_ACTIVE
+		       : V4L2_SUBDEV_FORMAT_TRY,
+	};
 	struct v4l2_mbus_framefmt *mf = &sfmt.format;
 	struct media_entity *me;
 	struct fimc_fmt *ffmt;
@@ -774,9 +777,7 @@ static int fimc_pipeline_try_format(struct fimc_ctx *ctx,
 	if (WARN_ON(!sd || !tfmt))
 		return -EINVAL;
 
-	memset(&sfmt, 0, sizeof(sfmt));
 	sfmt.format = *tfmt;
-	sfmt.which = set ? V4L2_SUBDEV_FORMAT_ACTIVE : V4L2_SUBDEV_FORMAT_TRY;
 
 	me = fimc_pipeline_get_head(&sd->entity);
 
diff --git a/drivers/media/platform/ti/am437x/am437x-vpfe.c b/drivers/media/platform/ti/am437x/am437x-vpfe.c
index 2dfae9bc0bba8..dffac89cbd210 100644
--- a/drivers/media/platform/ti/am437x/am437x-vpfe.c
+++ b/drivers/media/platform/ti/am437x/am437x-vpfe.c
@@ -1499,7 +1499,9 @@ static int vpfe_enum_size(struct file *file, void  *priv,
 			  struct v4l2_frmsizeenum *fsize)
 {
 	struct vpfe_device *vpfe = video_drvdata(file);
-	struct v4l2_subdev_frame_size_enum fse;
+	struct v4l2_subdev_frame_size_enum fse = {
+		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
+	};
 	struct v4l2_subdev *sd = vpfe->current_subdev->sd;
 	struct vpfe_fmt *fmt;
 	int ret;
@@ -1514,11 +1516,9 @@ static int vpfe_enum_size(struct file *file, void  *priv,
 
 	memset(fsize->reserved, 0x0, sizeof(fsize->reserved));
 
-	memset(&fse, 0x0, sizeof(fse));
 	fse.index = fsize->index;
 	fse.pad = 0;
 	fse.code = fmt->code;
-	fse.which = V4L2_SUBDEV_FORMAT_ACTIVE;
 	ret = v4l2_subdev_call(sd, pad, enum_frame_size, NULL, &fse);
 	if (ret)
 		return ret;
@@ -2146,7 +2146,6 @@ vpfe_async_bound(struct v4l2_async_notifier *notifier,
 {
 	struct vpfe_device *vpfe = container_of(notifier->v4l2_dev,
 					       struct vpfe_device, v4l2_dev);
-	struct v4l2_subdev_mbus_code_enum mbus_code;
 	struct vpfe_subdev_info *sdinfo;
 	struct vpfe_fmt *fmt;
 	int ret = 0;
@@ -2173,9 +2172,11 @@ vpfe_async_bound(struct v4l2_async_notifier *notifier,
 
 	vpfe->num_active_fmt = 0;
 	for (j = 0, i = 0; (ret != -EINVAL); ++j) {
-		memset(&mbus_code, 0, sizeof(mbus_code));
-		mbus_code.index = j;
-		mbus_code.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+		struct v4l2_subdev_mbus_code_enum mbus_code = {
+			.index = j,
+			.which = V4L2_SUBDEV_FORMAT_ACTIVE,
+		};
+
 		ret = v4l2_subdev_call(subdev, pad, enum_mbus_code,
 				       NULL, &mbus_code);
 		if (ret)
diff --git a/drivers/media/platform/ti/cal/cal-video.c b/drivers/media/platform/ti/cal/cal-video.c
index 4eade409d5d36..bbfd2719725aa 100644
--- a/drivers/media/platform/ti/cal/cal-video.c
+++ b/drivers/media/platform/ti/cal/cal-video.c
@@ -811,7 +811,6 @@ static const struct v4l2_file_operations cal_fops = {
 
 static int cal_ctx_v4l2_init_formats(struct cal_ctx *ctx)
 {
-	struct v4l2_subdev_mbus_code_enum mbus_code;
 	struct v4l2_mbus_framefmt mbus_fmt;
 	const struct cal_format_info *fmtinfo;
 	unsigned int i, j, k;
@@ -826,10 +825,11 @@ static int cal_ctx_v4l2_init_formats(struct cal_ctx *ctx)
 	ctx->num_active_fmt = 0;
 
 	for (j = 0, i = 0; ; ++j) {
+		struct v4l2_subdev_mbus_code_enum mbus_code = {
+			.index = j,
+			.which = V4L2_SUBDEV_FORMAT_ACTIVE,
+		};
 
-		memset(&mbus_code, 0, sizeof(mbus_code));
-		mbus_code.index = j;
-		mbus_code.which = V4L2_SUBDEV_FORMAT_ACTIVE;
 		ret = v4l2_subdev_call(ctx->phy->source, pad, enum_mbus_code,
 				       NULL, &mbus_code);
 		if (ret == -EINVAL)
diff --git a/drivers/media/usb/dvb-usb/cxusb-analog.c b/drivers/media/usb/dvb-usb/cxusb-analog.c
index e93183ddd7975..deba5224cb8df 100644
--- a/drivers/media/usb/dvb-usb/cxusb-analog.c
+++ b/drivers/media/usb/dvb-usb/cxusb-analog.c
@@ -1014,7 +1014,10 @@ static int cxusb_medion_try_s_fmt_vid_cap(struct file *file,
 {
 	struct dvb_usb_device *dvbdev = video_drvdata(file);
 	struct cxusb_medion_dev *cxdev = dvbdev->priv;
-	struct v4l2_subdev_format subfmt;
+	struct v4l2_subdev_format subfmt = {
+		.which = isset ? V4L2_SUBDEV_FORMAT_ACTIVE :
+			 V4L2_SUBDEV_FORMAT_TRY,
+	};
 	u32 field;
 	int ret;
 
@@ -1024,9 +1027,6 @@ static int cxusb_medion_try_s_fmt_vid_cap(struct file *file,
 	field = vb2_start_streaming_called(&cxdev->videoqueue) ?
 		cxdev->field_order : cxusb_medion_field_order(cxdev);
 
-	memset(&subfmt, 0, sizeof(subfmt));
-	subfmt.which = isset ? V4L2_SUBDEV_FORMAT_ACTIVE :
-		V4L2_SUBDEV_FORMAT_TRY;
 	subfmt.format.width = f->fmt.pix.width & ~1;
 	subfmt.format.height = f->fmt.pix.height & ~1;
 	subfmt.format.code = MEDIA_BUS_FMT_FIXED;
@@ -1464,7 +1464,9 @@ int cxusb_medion_analog_init(struct dvb_usb_device *dvbdev)
 					    .buf = tuner_analog_msg_data,
 					    .len =
 					    sizeof(tuner_analog_msg_data) };
-	struct v4l2_subdev_format subfmt;
+	struct v4l2_subdev_format subfmt = {
+		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
+	};
 	int ret;
 
 	/* switch tuner to analog mode so IF demod will become accessible */
@@ -1507,8 +1509,6 @@ int cxusb_medion_analog_init(struct dvb_usb_device *dvbdev)
 	v4l2_subdev_call(cxdev->tuner, video, s_std, cxdev->norm);
 	v4l2_subdev_call(cxdev->cx25840, video, s_std, cxdev->norm);
 
-	memset(&subfmt, 0, sizeof(subfmt));
-	subfmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
 	subfmt.format.width = cxdev->width;
 	subfmt.format.height = cxdev->height;
 	subfmt.format.code = MEDIA_BUS_FMT_FIXED;
diff --git a/drivers/staging/media/imx/imx-media-capture.c b/drivers/staging/media/imx/imx-media-capture.c
index 93ba092360105..5cc67786b9169 100644
--- a/drivers/staging/media/imx/imx-media-capture.c
+++ b/drivers/staging/media/imx/imx-media-capture.c
@@ -501,14 +501,14 @@ static int capture_legacy_g_parm(struct file *file, void *fh,
 				 struct v4l2_streamparm *a)
 {
 	struct capture_priv *priv = video_drvdata(file);
-	struct v4l2_subdev_frame_interval fi;
+	struct v4l2_subdev_frame_interval fi = {
+		.pad = priv->src_sd_pad,
+	};
 	int ret;
 
 	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		return -EINVAL;
 
-	memset(&fi, 0, sizeof(fi));
-	fi.pad = priv->src_sd_pad;
 	ret = v4l2_subdev_call(priv->src_sd, video, g_frame_interval, &fi);
 	if (ret < 0)
 		return ret;
@@ -523,14 +523,14 @@ static int capture_legacy_s_parm(struct file *file, void *fh,
 				 struct v4l2_streamparm *a)
 {
 	struct capture_priv *priv = video_drvdata(file);
-	struct v4l2_subdev_frame_interval fi;
+	struct v4l2_subdev_frame_interval fi = {
+		.pad = priv->src_sd_pad,
+	};
 	int ret;
 
 	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		return -EINVAL;
 
-	memset(&fi, 0, sizeof(fi));
-	fi.pad = priv->src_sd_pad;
 	fi.interval = a->parm.capture.timeperframe;
 	ret = v4l2_subdev_call(priv->src_sd, video, s_frame_interval, &fi);
 	if (ret < 0)
diff --git a/drivers/staging/media/imx/imx-media-utils.c b/drivers/staging/media/imx/imx-media-utils.c
index 411e907b68eba..b545750ca5262 100644
--- a/drivers/staging/media/imx/imx-media-utils.c
+++ b/drivers/staging/media/imx/imx-media-utils.c
@@ -432,15 +432,15 @@ int imx_media_init_cfg(struct v4l2_subdev *sd,
 		       struct v4l2_subdev_state *sd_state)
 {
 	struct v4l2_mbus_framefmt *mf_try;
-	struct v4l2_subdev_format format;
 	unsigned int pad;
 	int ret;
 
 	for (pad = 0; pad < sd->entity.num_pads; pad++) {
-		memset(&format, 0, sizeof(format));
+		struct v4l2_subdev_format format = {
+			.pad = pad,
+			.which = V4L2_SUBDEV_FORMAT_ACTIVE,
+		};
 
-		format.pad = pad;
-		format.which = V4L2_SUBDEV_FORMAT_ACTIVE;
 		ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &format);
 		if (ret)
 			continue;
diff --git a/drivers/staging/media/omap4iss/iss_video.c b/drivers/staging/media/omap4iss/iss_video.c
index 05548eab7daad..74fb0d185a8ff 100644
--- a/drivers/staging/media/omap4iss/iss_video.c
+++ b/drivers/staging/media/omap4iss/iss_video.c
@@ -237,7 +237,9 @@ static int
 __iss_video_get_format(struct iss_video *video,
 		       struct v4l2_mbus_framefmt *format)
 {
-	struct v4l2_subdev_format fmt;
+	struct v4l2_subdev_format fmt = {
+		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
+	};
 	struct v4l2_subdev *subdev;
 	u32 pad;
 	int ret;
@@ -246,9 +248,7 @@ __iss_video_get_format(struct iss_video *video,
 	if (!subdev)
 		return -EINVAL;
 
-	memset(&fmt, 0, sizeof(fmt));
 	fmt.pad = pad;
-	fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
 
 	mutex_lock(&video->mutex);
 	ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt);
-- 
2.39.2

[PATCH AUTOSEL 6.3 42/44] media: mediatek: vcodec: Fix potential array out-of-bounds in decoder queue_setup

[Sasha Levin]

From: Wei Chen <harperchen1110@gmail.com>

[ Upstream commit 8fbcf730cb89c3647f3365226fe7014118fa93c7 ]

variable *nplanes is provided by user via system call argument. The
possible value of q_data->fmt->num_planes is 1-3, while the value
of *nplanes can be 1-8. The array access by index i can cause array
out-of-bounds.

Fix this bug by checking *nplanes against the array size.

Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c
index 641f533c417fd..173407664cf42 100644
--- a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c
+++ b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c
@@ -753,6 +753,13 @@ int vb2ops_vdec_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
 	}
 
 	if (*nplanes) {
+		if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+			if (*nplanes != q_data->fmt->num_planes)
+				return -EINVAL;
+		} else {
+			if (*nplanes != 1)
+				return -EINVAL;
+		}
 		for (i = 0; i < *nplanes; i++) {
 			if (sizes[i] < q_data->sizeimage[i])
 				return -EINVAL;
-- 
2.39.2