Linux Media Controller development
 help / color / mirror / Atom feed
From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: Kate Hsuan <hpa@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
	Hans de Goede <johannes.goede@oss.qualcomm.com>,
	Hans Verkuil <hverkuil+cisco@kernel.org>,
	Serin Yeh <serin.yeh@intel.com>,
	linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 2/3] media: i2c: imx471: Add Sony IMX471 image sensor driver
Date: Sat, 23 May 2026 01:48:17 +0300	[thread overview]
Message-ID: <ahDdMZjID07dRDhZ@kekkonen.localdomain> (raw)
In-Reply-To: <20260522031121.11968-3-hpa@redhat.com>

Hi Kate,

Thanks for the update.

On Fri, May 22, 2026 at 11:11:20AM +0800, Kate Hsuan wrote:
> Add a new driver for Sony imx471 camera sensor. It is based on
> Jimmy Su <jimmy.su@intel.com> implementation and the driver can be found
> in the following URL.
> https://github.com/intel/ipu6-drivers/commits/master/drivers/media/i2c/imx471.c
> 
> This sensor can be found on Lenovo X9-14 and X9-15 laptop and it is a part

s/laptop\K/s/

> of IPU7 solution. The driver was tested on Lenovo X9-14 and X9-15 laptops.
> 
> Signed-off-by: Kate Hsuan <hpa@redhat.com>
> ---
>  MAINTAINERS                |    6 +
>  drivers/media/i2c/Kconfig  |   10 +
>  drivers/media/i2c/Makefile |    1 +
>  drivers/media/i2c/imx471.c | 1006 ++++++++++++++++++++++++++++++++++++
>  4 files changed, 1023 insertions(+)
>  create mode 100644 drivers/media/i2c/imx471.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 1126fdd639ad..d597337e7c24 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -24735,6 +24735,12 @@ T:	git git://linuxtv.org/media.git
>  F:	Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
>  F:	drivers/media/i2c/imx415.c
>  
> +SONY IMX471 SENSOR DRIVER
> +M:	Kate Hsuan <hpa@redhat.com>
> +L:	linux-media@vger.kernel.org
> +S:	Maintained
> +F:	drivers/media/i2c/imx471.c
> +
>  SONY MEMORYSTICK SUBSYSTEM
>  M:	Maxim Levitsky <maximlevitsky@gmail.com>
>  M:	Alex Dubov <oakad@yahoo.com>

...

> diff --git a/drivers/media/i2c/imx471.c b/drivers/media/i2c/imx471.c
> new file mode 100644
> index 000000000000..f3c7fdce2d50
> --- /dev/null
> +++ b/drivers/media/i2c/imx471.c

...

> +
> +#define IMX471_NUM_SUPPLIES			ARRAY_SIZE(imx471_supply_name)

Please just use ARRAY_SIZE() where you need it.

> +
> +/* Mode : resolution and related config&values */
> +struct imx471_mode {
> +	/* Frame width */
> +	u32 width;
> +	/* Frame height */
> +	u32 height;
> +
> +	/* V-timing */
> +	u32 fll_def;
> +	u32 fll_min;
> +
> +	/* H-timing */
> +	u32 llp;
> +
> +	/* index of link frequency */
> +	u32 link_freq_index;
> +
> +	/* Default register values */
> +	const struct cci_reg_sequence *default_mode_regs;
> +	const int default_mode_regs_length;

unsigned int?

const-ness here doesn't really matter as the entire struct is const.

> +};
> +
> +struct imx471 {
> +	struct v4l2_subdev sd;
> +	struct media_pad pad;
> +
> +	struct v4l2_ctrl_handler ctrl_handler;
> +	/* V4L2 Controls */
> +	struct v4l2_ctrl *link_freq;
> +	struct v4l2_ctrl *pixel_rate;
> +	struct v4l2_ctrl *vblank;
> +	struct v4l2_ctrl *hblank;
> +	struct v4l2_ctrl *vflip;
> +	struct v4l2_ctrl *hflip;
> +	struct v4l2_ctrl *exposure;

Do you need all these? At least link_freq remains effectively unused.

> +
> +	struct gpio_desc *reset_gpio;
> +	struct regulator_bulk_data supplies[IMX471_NUM_SUPPLIES];
> +	struct clk *img_clk;
> +
> +	struct device *dev;
> +	struct regmap *regmap;
> +};
> +
> +static const struct cci_reg_sequence imx471_global_regs[] = {
> +	{ CCI_REG8(0x0136), 0x13 },
> +	{ CCI_REG8(0x0137), 0x33 },
> +	{ CCI_REG8(0x3c7e), 0x08 },
> +	{ CCI_REG8(0x3c7f), 0x05 },
> +	{ CCI_REG8(0x3e35), 0x00 },
> +	{ CCI_REG8(0x3e36), 0x00 },
> +	{ CCI_REG8(0x3e37), 0x00 },
> +	{ CCI_REG8(0x3f7f), 0x01 },
> +	{ CCI_REG8(0x4431), 0x04 },
> +	{ CCI_REG8(0x531c), 0x01 },
> +	{ CCI_REG8(0x531d), 0x02 },
> +	{ CCI_REG8(0x531e), 0x04 },
> +	{ CCI_REG8(0x5928), 0x00 },
> +	{ CCI_REG8(0x5929), 0x2f },
> +	{ CCI_REG8(0x592a), 0x00 },
> +	{ CCI_REG8(0x592b), 0x85 },
> +	{ CCI_REG8(0x592c), 0x00 },
> +	{ CCI_REG8(0x592d), 0x32 },
> +	{ CCI_REG8(0x592e), 0x00 },
> +	{ CCI_REG8(0x592f), 0x88 },
> +	{ CCI_REG8(0x5930), 0x00 },
> +	{ CCI_REG8(0x5931), 0x3d },
> +	{ CCI_REG8(0x5932), 0x00 },
> +	{ CCI_REG8(0x5933), 0x93 },
> +	{ CCI_REG8(0x5938), 0x00 },
> +	{ CCI_REG8(0x5939), 0x24 },
> +	{ CCI_REG8(0x593a), 0x00 },
> +	{ CCI_REG8(0x593b), 0x7a },
> +	{ CCI_REG8(0x593c), 0x00 },
> +	{ CCI_REG8(0x593d), 0x24 },
> +	{ CCI_REG8(0x593e), 0x00 },
> +	{ CCI_REG8(0x593f), 0x7a },
> +	{ CCI_REG8(0x5940), 0x00 },
> +	{ CCI_REG8(0x5941), 0x2f },
> +	{ CCI_REG8(0x5942), 0x00 },
> +	{ CCI_REG8(0x5943), 0x85 },
> +	{ CCI_REG8(0x5f0e), 0x6e },
> +	{ CCI_REG8(0x5f11), 0xc6 },
> +	{ CCI_REG8(0x5f17), 0x5e },
> +	{ CCI_REG8(0x7990), 0x01 },
> +	{ CCI_REG8(0x7993), 0x5d },
> +	{ CCI_REG8(0x7994), 0x5d },
> +	{ CCI_REG8(0x7995), 0xa1 },
> +	{ CCI_REG8(0x799a), 0x01 },
> +	{ CCI_REG8(0x799d), 0x00 },
> +	{ CCI_REG8(0x8169), 0x01 },
> +	{ CCI_REG8(0x8359), 0x01 },
> +	{ CCI_REG8(0x9302), 0x1e },
> +	{ CCI_REG8(0x9306), 0x1f },
> +	{ CCI_REG8(0x930a), 0x26 },
> +	{ CCI_REG8(0x930e), 0x23 },
> +	{ CCI_REG8(0x9312), 0x23 },
> +	{ CCI_REG8(0x9316), 0x2c },
> +	{ CCI_REG8(0x9317), 0x19 },
> +	{ CCI_REG8(0xb046), 0x01 },
> +	{ CCI_REG8(0xb048), 0x01 },
> +};
> +
> +static const struct cci_reg_sequence mode_1928x1088_regs[] = {
> +	{ CCI_REG8(0x0101), 0x00 },
> +	{ CCI_REG8(0x0112), 0x0a },
> +	{ CCI_REG8(0x0113), 0x0a },
> +	{ CCI_REG8(0x0114), 0x03 },
> +	{ CCI_REG8(0x0342), 0x0a },
> +	{ CCI_REG8(0x0343), 0x00 },
> +	{ CCI_REG8(0x0340), 0x13 },
> +	{ CCI_REG8(0x0341), 0xb0 },
> +	{ CCI_REG8(0x0344), 0x00 },
> +	{ CCI_REG8(0x0345), 0x00 },
> +	{ CCI_REG8(0x0346), 0x01 },
> +	{ CCI_REG8(0x0347), 0xbc },
> +	{ CCI_REG8(0x0348), 0x12 },
> +	{ CCI_REG8(0x0349), 0x2f },
> +	{ CCI_REG8(0x034a), 0x0b },
> +	{ CCI_REG8(0x034b), 0xeb },
> +	{ CCI_REG8(0x0381), 0x01 },
> +	{ CCI_REG8(0x0383), 0x01 },
> +	{ CCI_REG8(0x0385), 0x01 },
> +	{ CCI_REG8(0x0387), 0x01 },
> +	{ CCI_REG8(0x0900), 0x01 },
> +	{ CCI_REG8(0x0901), 0x22 },
> +	{ CCI_REG8(0x0902), 0x08 },
> +	{ CCI_REG8(0x3f4c), 0x81 },
> +	{ CCI_REG8(0x3f4d), 0x81 },
> +	{ CCI_REG8(0x0408), 0x00 },
> +	{ CCI_REG8(0x0409), 0xc8 },
> +	{ CCI_REG8(0x040a), 0x00 },
> +	{ CCI_REG8(0x040b), 0x6c },
> +	{ CCI_REG8(0x040c), 0x07 },
> +	{ CCI_REG8(0x040d), 0x88 },
> +	{ CCI_REG8(0x040e), 0x04 },
> +	{ CCI_REG8(0x040f), 0x40 },
> +	{ CCI_REG8(0x034c), 0x07 },
> +	{ CCI_REG8(0x034d), 0x88 },
> +	{ CCI_REG8(0x034e), 0x04 },
> +	{ CCI_REG8(0x034f), 0x40 },
> +	{ CCI_REG8(0x0301), 0x06 },
> +	{ CCI_REG8(0x0303), 0x02 },
> +	{ CCI_REG8(0x0305), 0x02 },
> +	{ CCI_REG8(0x0306), 0x00 },
> +	{ CCI_REG8(0x0307), 0x79 },
> +	{ CCI_REG8(0x030b), 0x01 },
> +	{ CCI_REG8(0x030d), 0x02 },
> +	{ CCI_REG8(0x030e), 0x00 },
> +	{ CCI_REG8(0x030f), 0x53 },
> +	{ CCI_REG8(0x0310), 0x01 },
> +	{ CCI_REG8(0x0202), 0x13 },
> +	{ CCI_REG8(0x0203), 0x9e },
> +	{ CCI_REG8(0x0204), 0x00 },
> +	{ CCI_REG8(0x0205), 0x00 },
> +	{ CCI_REG8(0x020e), 0x01 },
> +	{ CCI_REG8(0x020f), 0x00 },
> +	{ CCI_REG8(0x3f78), 0x01 },
> +	{ CCI_REG8(0x3f79), 0x31 },
> +	{ CCI_REG8(0x3ffe), 0x00 },
> +	{ CCI_REG8(0x3fff), 0x8a },
> +	{ CCI_REG8(0x5f0a), 0xb6 },
> +};
> +
> +static const char * const imx471_test_pattern_menu[] = {
> +	"Disabled",
> +	"Solid Colour",
> +	"Eight Vertical Colour Bars",
> +	"Colour Bars With Fade to Grey",
> +	"Pseudorandom Sequence (PN9)",
> +};
> +
> +/*
> + * When adding more than the one below, make sure the disallowed ones will
> + * actually be disabled in the LINK_FREQ control.
> + */
> +static const s64 link_freq_menu_items[] = {
> +	IMX471_LINK_FREQ_DEFAULT,
> +};
> +
> +/*
> + * The Bayer formats for the flipping.
> + * - no flip
> + * - h flip
> + * - v flip
> + * - h and v flips
> + */
> +static const u32 imx471_hv_flips_bayer_order[] = {
> +	MEDIA_BUS_FMT_SRGGB10_1X10,
> +	MEDIA_BUS_FMT_SGRBG10_1X10,
> +	MEDIA_BUS_FMT_SGBRG10_1X10,
> +	MEDIA_BUS_FMT_SBGGR10_1X10,
> +};
> +
> +/* Mode configs */
> +static const struct imx471_mode imx471_modes[] = {
> +	{
> +		.width = 1928,
> +		.height = 1088,
> +		.fll_def = 1308,
> +		.fll_min = 1308,
> +		.llp = 2328,
> +		.link_freq_index = IMX471_LINK_FREQ_INDEX,
> +		.default_mode_regs = mode_1928x1088_regs,
> +		.default_mode_regs_length = ARRAY_SIZE(mode_1928x1088_regs),
> +	},
> +};
> +
> +static int imx471_get_regulators(struct device *dev, struct imx471 *sensor)
> +{
> +	for (unsigned int  i = 0; i < IMX471_NUM_SUPPLIES; i++)

s/ \K //

> +		sensor->supplies[i].supply = imx471_supply_name[i];
> +
> +	return devm_regulator_bulk_get(dev, IMX471_NUM_SUPPLIES,
> +				       sensor->supplies);
> +}

...

> +/* Start streaming */
> +static int imx471_enable_stream(struct v4l2_subdev *sd,
> +				struct v4l2_subdev_state *state,
> +				u32 pad, u64 streams_mask)
> +{
> +	struct imx471 *sensor = to_imx471(sd);
> +	const struct imx471_mode *mode;
> +	struct v4l2_mbus_framefmt *fmt;
> +	int ret;
> +
> +	ret = pm_runtime_resume_and_get(sensor->dev);
> +	if (ret)

Just return the error code here -- pm_runtime_resume_and_get() won't
increment the usage count unless it succeeds.

> +		goto error_powerdown;
> +
> +	ret = imx471_identify_module(sensor);
> +	if (ret)
> +		return ret;
> +
> +	/* Global Setting */
> +	cci_multi_reg_write(sensor->regmap, imx471_global_regs,
> +			    ARRAY_SIZE(imx471_global_regs), &ret);
> +	if (ret) {
> +		dev_err(sensor->dev, "failed to set global settings");
> +		goto error_powerdown;
> +	}
> +
> +	state = v4l2_subdev_get_locked_active_state(&sensor->sd);
> +	fmt = v4l2_subdev_state_get_format(state, 0);
> +	mode = v4l2_find_nearest_size(imx471_modes, ARRAY_SIZE(imx471_modes),
> +				      width, height, fmt->width, fmt->height);
> +
> +	/* Apply default values of current mode */
> +	cci_multi_reg_write(sensor->regmap, mode->default_mode_regs,
> +			    mode->default_mode_regs_length, &ret);
> +	if (ret) {
> +		dev_err(sensor->dev, "failed to set mode");
> +		goto error_powerdown;
> +	}
> +
> +	/* set digital gain control to all color mode */
> +	cci_write(sensor->regmap, IMX471_REG_DPGA_USE_GLOBAL_GAIN, 1, &ret);
> +	if (ret)
> +		goto error_powerdown;
> +
> +	/* Apply customized values from user */
> +	ret =  __v4l2_ctrl_handler_setup(&sensor->ctrl_handler);
> +	if (ret)
> +		goto error_powerdown;
> +
> +	cci_write(sensor->regmap, IMX471_REG_MODE_SELECT,
> +		  IMX471_MODE_STREAMING, &ret);
> +	if (ret)
> +		goto error_powerdown;
> +
> +	__v4l2_ctrl_grab(sensor->vflip, true);
> +	__v4l2_ctrl_grab(sensor->hflip, true);
> +
> +	return ret;
> +
> +error_powerdown:
> +	pm_runtime_put(sensor->dev);
> +
> +	return ret;
> +}
> +
> +/* Stop streaming */
> +static int imx471_disable_stream(struct v4l2_subdev *sd,
> +				 struct v4l2_subdev_state *state,
> +				 u32 pad, u64 streams_mask)
> +{
> +	struct imx471 *sensor = to_imx471(sd);
> +	int ret;
> +
> +	cci_write(sensor->regmap, IMX471_REG_MODE_SELECT,
> +		  IMX471_MODE_STANDBY, &ret);
> +	pm_runtime_put(sensor->dev);
> +
> +	if (ret)
> +		dev_err(sensor->dev,
> +			"failed to disable stream with return value: %d\n",
> +			ret);
> +	__v4l2_ctrl_grab(sensor->vflip, false);
> +	__v4l2_ctrl_grab(sensor->hflip, false);
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_subdev_core_ops imx471_subdev_core_ops = {
> +	.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
> +	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
> +};
> +
> +static const struct v4l2_subdev_video_ops imx471_video_ops = {
> +	.s_stream = v4l2_subdev_s_stream_helper,
> +};
> +
> +static const struct v4l2_subdev_pad_ops imx471_pad_ops = {
> +	.enum_mbus_code = imx471_enum_mbus_code,
> +	.get_fmt = v4l2_subdev_get_fmt,
> +	.set_fmt = imx471_set_pad_format,
> +	.get_selection = imx471_get_selection,
> +	.enum_frame_size = imx471_enum_frame_size,
> +	.enable_streams = imx471_enable_stream,
> +	.disable_streams = imx471_disable_stream,
> +};
> +
> +static const struct v4l2_subdev_ops imx471_subdev_ops = {
> +	.core = &imx471_subdev_core_ops,
> +	.video = &imx471_video_ops,
> +	.pad = &imx471_pad_ops,
> +};
> +
> +static const struct v4l2_subdev_internal_ops imx471_internal_ops = {
> +	.init_state = imx471_init_state,
> +};
> +
> +/* Initialize control handlers */
> +static int imx471_init_controls(struct imx471 *sensor)
> +{
> +	const struct imx471_mode *mode = &imx471_modes[0];
> +	struct v4l2_ctrl_handler *ctrl_hdlr;
> +	struct v4l2_fwnode_device_properties props;
> +	s64 exposure_max, hblank;
> +	u64 pixel_rate;
> +	int ret;
> +
> +	ctrl_hdlr = &sensor->ctrl_handler;
> +	ret = v4l2_ctrl_handler_init(ctrl_hdlr, 10);
> +	if (ret)
> +		return ret;
> +
> +	ret = v4l2_fwnode_device_parse(sensor->dev, &props);
> +	if (ret) {
> +		dev_err(sensor->dev, "failed to parse fwnode: %d", ret);
> +		return ret;
> +	}
> +
> +	v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, &imx471_ctrl_ops, &props);
> +
> +	sensor->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr,
> +						   &imx471_ctrl_ops,
> +						   V4L2_CID_LINK_FREQ,
> +						   ARRAY_SIZE(link_freq_menu_items) - 1,
> +						   0,
> +						   link_freq_menu_items);
> +	if (sensor->link_freq)
> +		sensor->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> +	/* pixel_rate = link_freq * 2 * nr_of_lanes / bits_per_sample */
> +	pixel_rate = IMX471_LINK_FREQ_DEFAULT * 2 * 4;
> +	div_u64(pixel_rate, 10);
> +	/* By default, PIXEL_RATE is read only */
> +	sensor->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &imx471_ctrl_ops,
> +					       V4L2_CID_PIXEL_RATE, pixel_rate,
> +					       pixel_rate, 1, pixel_rate);
> +
> +	/* Initial vblank/hblank/exposure parameters based on current mode */
> +	sensor->vblank = v4l2_ctrl_new_std(ctrl_hdlr,
> +					   &imx471_ctrl_ops,
> +					   V4L2_CID_VBLANK,
> +					   mode->fll_min - mode->height,
> +					   IMX471_FLL_MAX - mode->height,
> +					   1,
> +					   mode->fll_def - mode->height);
> +
> +	hblank = mode->llp - mode->width;
> +	sensor->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx471_ctrl_ops,
> +					   V4L2_CID_HBLANK, hblank, hblank,
> +					   1, hblank);
> +	if (sensor->hblank)
> +		sensor->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> +	/* fll >= exposure time + adjust parameter (default value is 18) */
> +	exposure_max = mode->fll_def - IMX471_EXPOSURE_MARGIN;
> +	sensor->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &imx471_ctrl_ops,
> +					     V4L2_CID_EXPOSURE,
> +					     IMX471_EXPOSURE_MIN, exposure_max,
> +					     IMX471_EXPOSURE_STEP,
> +					     IMX471_EXPOSURE_DEFAULT);
> +
> +	v4l2_ctrl_new_std(ctrl_hdlr, &imx471_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
> +			  IMX471_ANA_GAIN_MIN, IMX471_ANA_GAIN_MAX,
> +			  IMX471_ANA_GAIN_STEP, IMX471_ANA_GAIN_DEFAULT);
> +
> +	/* Digital gain */
> +	v4l2_ctrl_new_std(ctrl_hdlr, &imx471_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
> +			  IMX471_DGTL_GAIN_MIN, IMX471_DGTL_GAIN_MAX,
> +			  IMX471_DGTL_GAIN_STEP, IMX471_DGTL_GAIN_DEFAULT);
> +
> +	v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &imx471_ctrl_ops,
> +				     V4L2_CID_TEST_PATTERN,
> +				     ARRAY_SIZE(imx471_test_pattern_menu) - 1,
> +				     0, 0, imx471_test_pattern_menu);
> +
> +	/* HFLIP & VFLIP */
> +	sensor->hflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx471_ctrl_ops,
> +					  V4L2_CID_HFLIP, 0, 1, 1, 0);
> +
> +	sensor->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx471_ctrl_ops,
> +					  V4L2_CID_VFLIP, 0, 1, 1, 0);
> +
> +	if (ctrl_hdlr->error) {
> +		dev_err(sensor->dev, "%s control init failed: %d",
> +			__func__, ctrl_hdlr->error);
> +		goto error;
> +	}
> +
> +	sensor->hflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
> +	sensor->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;

Either set all flags where controls are created or here. I think I'd move
them here.

> +
> +	sensor->sd.ctrl_handler = ctrl_hdlr;
> +
> +	return 0;
> +
> +error:
> +	v4l2_ctrl_handler_free(ctrl_hdlr);
> +
> +	return ctrl_hdlr->error;
> +}
> +
> +static int imx471_check_hwcfg(struct imx471 *sensor)
> +{
> +	struct v4l2_fwnode_endpoint bus_cfg = {
> +		.bus_type = V4L2_MBUS_CSI2_DPHY,
> +	};
> +	struct fwnode_handle *ep, *fwnode = dev_fwnode(sensor->dev);
> +	struct clk *clk;
> +	unsigned long link_freq_bitmap;
> +	int ret;
> +
> +	clk = devm_v4l2_sensor_clk_get(sensor->dev, NULL);
> +	if (IS_ERR(clk))
> +		return dev_err_probe(sensor->dev, PTR_ERR(clk),
> +				     "can't get clock frequency\n");
> +
> +	if (clk_get_rate(clk) != IMX471_EXT_CLK)
> +		return dev_err_probe(sensor->dev, -EINVAL,
> +				     "external clock %lu is not supported\n",
> +				     clk_get_rate(clk));
> +
> +	ep = fwnode_graph_get_endpoint_by_id(fwnode, 0, 0, 0);
> +	ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
> +	fwnode_handle_put(ep);
> +	if (ret)
> +		return dev_err_probe(sensor->dev, ret,
> +				     "parsing endpoint failed");
> +
> +	ret = v4l2_link_freq_to_bitmap(sensor->dev, bus_cfg.link_frequencies,
> +				       bus_cfg.nr_of_link_frequencies,
> +				       link_freq_menu_items,
> +				       ARRAY_SIZE(link_freq_menu_items),
> +				       &link_freq_bitmap);
> +
> +	v4l2_fwnode_endpoint_free(&bus_cfg);
> +
> +	return ret;
> +}
> +
> +static int imx471_probe(struct i2c_client *client)
> +{
> +	struct imx471 *sensor;
> +	int ret;
> +
> +	sensor = devm_kzalloc(&client->dev, sizeof(*sensor), GFP_KERNEL);
> +	if (!sensor)
> +		return dev_err_probe(&client->dev, -ENOMEM,
> +				     "failed to allocate memory\n");
> +
> +	sensor->dev = &client->dev;
> +
> +	/* Check HW config */
> +	ret = imx471_check_hwcfg(sensor);
> +	if (ret)
> +		return dev_err_probe(sensor->dev, ret,
> +				     "failed to check hwcfg: %d\n", ret);
> +
> +	ret = imx471_get_regulators(sensor->dev, sensor);
> +	if (ret)
> +		return dev_err_probe(sensor->dev, ret,
> +				     "failed to get regulators\n");
> +
> +	sensor->reset_gpio = devm_gpiod_get_optional(sensor->dev, "reset",
> +						     GPIOD_OUT_HIGH);
> +	if (IS_ERR(sensor->reset_gpio))
> +		return dev_err_probe(sensor->dev, PTR_ERR(sensor->reset_gpio),
> +				     "failed to get reset gpio\n");
> +
> +	sensor->img_clk = devm_clk_get_optional(sensor->dev, NULL);
> +	if (IS_ERR(sensor->img_clk))
> +		return dev_err_probe(sensor->dev, PTR_ERR(sensor->img_clk),
> +				     "failed to get imaging clock\n");
> +
> +	/* Initialize subdev */
> +	v4l2_i2c_subdev_init(&sensor->sd, client, &imx471_subdev_ops);
> +
> +	/* Initialize regmap */
> +	sensor->regmap = devm_cci_regmap_init_i2c(client, 16);
> +	if (IS_ERR(sensor->regmap))
> +		return PTR_ERR(sensor->regmap);
> +
> +	ret = imx471_power_on(sensor->dev);
> +	if (ret)
> +		return dev_err_probe(sensor->dev, ret,
> +				     "failed to power on\n");
> +
> +	/* Check module identity */
> +	ret = imx471_identify_module(sensor);
> +	if (ret) {
> +		dev_err(&client->dev, "failed to find sensor: %d", ret);
> +		goto error_power_off;
> +	}
> +
> +	ret = imx471_init_controls(sensor);
> +	if (ret) {
> +		dev_err(sensor->dev, "failed to init controls: %d", ret);
> +		goto error_power_off;
> +	}
> +
> +	/* Initialize subdev */
> +	sensor->sd.internal_ops = &imx471_internal_ops;
> +	sensor->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
> +			    V4L2_SUBDEV_FL_HAS_EVENTS;
> +	sensor->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> +
> +	/* Initialize source pad */
> +	sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
> +	ret = media_entity_pads_init(&sensor->sd.entity, 1, &sensor->pad);
> +	if (ret) {
> +		dev_err(&client->dev, "failed to init entity pads: %d", ret);
> +		goto error_v4l2_ctrl_handler_free;
> +	}
> +
> +	sensor->sd.state_lock = sensor->ctrl_handler.lock;
> +	ret = v4l2_subdev_init_finalize(&sensor->sd);
> +	if (ret < 0) {
> +		dev_err(&client->dev, "failed to init subdev: %d", ret);
> +		goto error_media_entity_pm;
> +	}
> +
> +	pm_runtime_set_active(sensor->dev);
> +	pm_runtime_enable(sensor->dev);
> +	pm_runtime_idle(sensor->dev);

Move the pm_runtime_idle() call after v4l2_async_register_subdev_sensor().
Otherwise Runtime PM may power off the sensor on error and the driver still
calls imx471_power_off().

> +
> +	ret = v4l2_async_register_subdev_sensor(&sensor->sd);
> +	if (ret < 0)
> +		goto error_v4l2_subdev_cleanup;
> +
> +	return 0;
> +
> +error_v4l2_subdev_cleanup:
> +	pm_runtime_disable(sensor->dev);
> +	pm_runtime_set_suspended(sensor->dev);
> +	v4l2_subdev_cleanup(&sensor->sd);
> +
> +error_media_entity_pm:
> +	media_entity_cleanup(&sensor->sd.entity);
> +
> +error_v4l2_ctrl_handler_free:
> +	v4l2_ctrl_handler_free(sensor->sd.ctrl_handler);
> +
> +error_power_off:
> +	imx471_power_off(sensor->dev);
> +
> +	return ret;
> +}
> +
> +static void imx471_remove(struct i2c_client *client)
> +{
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct imx471 *sensor = to_imx471(sd);
> +
> +	v4l2_async_unregister_subdev(sd);
> +	v4l2_subdev_cleanup(sd);
> +	media_entity_cleanup(&sd->entity);
> +	v4l2_ctrl_handler_free(sd->ctrl_handler);
> +
> +	pm_runtime_disable(&client->dev);
> +
> +	if (!pm_runtime_status_suspended(sensor->dev)) {
> +		imx471_power_off(sensor->dev);
> +		pm_runtime_set_suspended(sensor->dev);
> +	}
> +}
> +
> +static DEFINE_RUNTIME_DEV_PM_OPS(imx471_pm_ops, imx471_power_off,
> +				 imx471_power_on, NULL);
> +
> +static const struct acpi_device_id imx471_acpi_ids[] __maybe_unused = {
> +	{ "SONY471A" },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(acpi, imx471_acpi_ids);
> +
> +static struct i2c_driver imx471_i2c_driver = {
> +	.driver = {
> +		.name = "imx471",
> +		.acpi_match_table = ACPI_PTR(imx471_acpi_ids),
> +		.pm = pm_sleep_ptr(&imx471_pm_ops),
> +	},
> +	.probe = imx471_probe,
> +	.remove = imx471_remove,
> +};
> +module_i2c_driver(imx471_i2c_driver);
> +
> +MODULE_AUTHOR("Jimmy Su <jimmy.su@intel.com>");
> +MODULE_AUTHOR("Serin Yeh <serin.yeh@intel.com>");
> +MODULE_AUTHOR("Kate Hsuan <hpa@redhat.com>");
> +MODULE_DESCRIPTION("Sony imx471 sensor driver");
> +MODULE_LICENSE("GPL");

-- 
Kind regards,

Sakari Ailus

  parent reply	other threads:[~2026-05-22 22:55 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-22  3:11 [PATCH v3 0/3] Add Sony IMX471 camera sensor driver Kate Hsuan
2026-05-22  3:11 ` [PATCH v3 1/3] media: ipu-bridge: Add DMI information of Lenovo X9 to the image upside-down list Kate Hsuan
2026-05-29 22:33   ` Damjan Georgievski
2026-06-02  9:35     ` Kate Hsuan
2026-06-03  5:03       ` Mark Pearson
2026-06-04  3:19         ` Kate Hsuan
2026-05-22  3:11 ` [PATCH v3 2/3] media: i2c: imx471: Add Sony IMX471 image sensor driver Kate Hsuan
2026-05-22 11:12   ` Tarang Raval
2026-05-22 22:38     ` Sakari Ailus
2026-05-27  6:24       ` Kate Hsuan
2026-05-27  6:01     ` Kate Hsuan
2026-05-22 22:48   ` Sakari Ailus [this message]
2026-05-27  6:14     ` Kate Hsuan
2026-05-27 11:42       ` Sakari Ailus
2026-06-05  8:43         ` Kate Hsuan
2026-06-05  9:32           ` Tarang Raval
2026-05-22  3:11 ` [PATCH v3 3/3] media: i2c: imx471: Naming the register Kate Hsuan
2026-05-22 22:49   ` Sakari Ailus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ahDdMZjID07dRDhZ@kekkonen.localdomain \
    --to=sakari.ailus@linux.intel.com \
    --cc=hpa@redhat.com \
    --cc=hverkuil+cisco@kernel.org \
    --cc=johannes.goede@oss.qualcomm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=serin.yeh@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox