* GrabBeeX - empia 2800 USB 2.0 - problem
@ 2011-12-15 16:31 Adrian Sergiu DARABANT
0 siblings, 0 replies; only message in thread
From: Adrian Sergiu DARABANT @ 2011-12-15 16:31 UTC (permalink / raw)
To: linux-media
Hi,
I've got these kind of old usb 2.0 grabbers (GrabBeex) based on some
em28xx chipsets that are not correctly identified under linux. Here is the
dmesg log.
A video device is created but there are no controls in v4l-info and dmesg
seems to see that everything is probably not correctly detected. I have a
few of the so I can send one for testing if needed - but I would be
interested in making it working.Also there is no grab button as the dmesg
log suggests !
In Windows 7 - the update system finds and installs an empia 2800 driver -
appears as an USB 2800 device in the device list. On Windows the are
controls and the device works as expected.
Thx
Adrian
[25966.853726] em28xx: New device @ 480 Mbps (eb1a:2800, interface 0,
class 0)
[25966.853965] em28xx #0: chip ID is em2800
[25966.957709] em28xx #0: board has no eeprom
[25967.017502] em28xx #0: preparing read at i2c address 0x60 failed
(error=-19)
[25967.053604] em28xx #0: Identified as Unknown EM2800 video grabber
(card=0)
[25968.190585] em28xx #0: found i2c device @ 0x4a [saa7113h]
[25970.884130] em28xx #0: Your board has no unique USB ID.
[25970.884136] em28xx #0: A hint were successfully done, based on i2c
devicelist hash.
[25970.884140] em28xx #0: This method is not 100% failproof.
[25970.884143] em28xx #0: If the board were missdetected, please email
this log to:
[25970.884145] em28xx #0: V4L Mailing List
<linux-media@vger.kernel.org>
[25970.884149] em28xx #0: Board detected as EM2860/SAA711X Reference Design
[25970.884153] em28xx #0: Registering snapshot button...
[25970.884278] input: em28xx snapshot button as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/input/input19
[25970.888795] em28xx #0: Config register raw data: 0xa4
[25970.888800] em28xx #0: I2S Audio (3 sample rates)
[25970.888804] em28xx #0: No AC97 audio processor
[25970.939649] em28xx #0: v4l2 driver version 0.1.2
[25971.386698] em28xx #0: V4L2 video device registered as video1
[25971.386705] em28xx-audio.c: probing for em28x1 non standard usbaudio
[25971.386708] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
lsusb -v -d eb1a:2800
Bus 002 Device 004: ID eb1a:2800 eMPIA Technology, Inc. Terratec Cinergy
200
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0xeb1a eMPIA Technology, Inc.
idProduct 0x2800 Terratec Cinergy 200
bcdDevice 1.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 129
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0284 1x 644 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0a84 2x 644 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x135c 3x 860 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2011-12-15 16:38 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-12-15 16:31 GrabBeeX - empia 2800 USB 2.0 - problem Adrian Sergiu DARABANT
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox