Re: [PATCH] Compro Videomate T750F Vista digital+analog support

["Samuel Rakitničan" <samuel.rakitnican@gmail.com>]

On Sun, 16 May 2010 12:38:03 +0200, semiRocket <semirocket@gmail.com>  
wrote:

> On Mon, 10 May 2010 01:15:35 +0200, Emard <davoremard@gmail.com> wrote:
>
>> HI
>>
>> This is even more cleanup from spaces into tabs
>> and replacing KEY_BACKSPACE with KEY_BACK
>> which I think is more appropriate for this remote.
>>
>> compro t750f patch v17
>>
>> About the remote - I noticed 2-10% of the keypresses
>> are not recognized, seems like it either looses packets
>> or saa7134 gpio should be scanned faster/better/more_reliable?
>> I think this may be the issue with other 7134 based
>> remotes too
>>
>> Best Regards, Emard
>>
>
> Hi Davor,
>
>
> Unfortunately it doesn't work for me. It can't load firmware like  
> before, I've attached patch against recent hg tree I applied manually  
> (without IR code part) and dmesg output.
>
> In tvtime it shows black screen in PAL mode, if switch to SECAM, it's  
> still black screen but with some random flickering occurring represented  
> by horizontal red/green lines. No white/black dots noise present.
>
> Thanks,
> Samuel

The good news is that it managed to load firmware after beign prepared by  
windows driver previously, but somehow unstable e.g. sometimes I can  
restart tvtime 3 times before stops working, sometimes it load firmware on  
modprobe but fails when I run tvtime.

Other than that analog seems to work fine when firmware successfully load.  
I didn't managed to get the sound though, previosly with the command like

	sox -c 2 -s -r 32000 -t ossdsp /dev/dsp1 -t ossdsp -r 32000 /dev/dsp &
	
now doesn't work, I'm not sure yet if it's the driver problem.

I didn't test dvb at all (don't have good signal).


Best regards,
Samuel