Re: [PATCH] usb: host: xhci-mtk: omit shared hcd if either root hub has no ports

["Chunfeng Yun (云春峰)" <Chunfeng.Yun@mediatek.com>]

On Wed, 2022-11-23 at 13:10 +0200, Mathias Nyman wrote:
> On 18.11.2022 13.01, Chunfeng Yun wrote:
> > There is error log when add a usb3 root hub without ports:
> > "hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)"
> > 
> > so omit the shared hcd if either of the root hubs has no ports, but
> > usually there is no usb3 port.
> > 
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > ---
> >   drivers/usb/host/xhci-mtk.c | 72 +++++++++++++++++++++++---------
> > -----
> >   1 file changed, 46 insertions(+), 26 deletions(-)
> > 
> > diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-
> > mtk.c
> > index 01705e559c42..cff3c4aea036 100644
> > --- a/drivers/usb/host/xhci-mtk.c
> > +++ b/drivers/usb/host/xhci-mtk.c
> > @@ -485,6 +485,7 @@ static int xhci_mtk_probe(struct
> > platform_device *pdev)
> >   	const struct hc_driver *driver;
> >   	struct xhci_hcd *xhci;
> >   	struct resource *res;
> > +	struct usb_hcd *usb3_hcd;
> >   	struct usb_hcd *hcd;
> >   	int ret = -ENODEV;
> >   	int wakeup_irq;
> > @@ -593,6 +594,7 @@ static int xhci_mtk_probe(struct
> > platform_device *pdev)
> >   
> >   	xhci = hcd_to_xhci(hcd);
> >   	xhci->main_hcd = hcd;
> > +	xhci->allow_single_roothub = 1;
> >   
> >   	/*
> >   	 * imod_interval is the interrupt moderation value in
> > nanoseconds.
> > @@ -602,24 +604,29 @@ static int xhci_mtk_probe(struct
> > platform_device *pdev)
> >   	xhci->imod_interval = 5000;
> >   	device_property_read_u32(dev, "imod-interval-ns", &xhci-
> > >imod_interval);
> >   
> > -	xhci->shared_hcd = usb_create_shared_hcd(driver, dev,
> > -			dev_name(dev), hcd);
> > -	if (!xhci->shared_hcd) {
> > -		ret = -ENOMEM;
> > -		goto disable_device_wakeup;
> > -	}
> > -
> >   	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
> >   	if (ret)
> > -		goto put_usb3_hcd;
> > +		goto disable_device_wakeup;
> >   
> > -	if (HCC_MAX_PSA(xhci->hcc_params) >= 4 &&
> > +	if (!xhci_has_one_roothub(xhci)) {
> > +		xhci->shared_hcd = usb_create_shared_hcd(driver, dev,
> > +							 dev_name(dev),
> > hcd);
> > +		if (!xhci->shared_hcd) {
> > +			ret = -ENOMEM;
> > +			goto dealloc_usb2_hcd;
> > +		}
> > +	}
> > +
> > +	usb3_hcd = xhci_get_usb3_hcd(xhci);
> > +	if (usb3_hcd && HCC_MAX_PSA(xhci->hcc_params) >= 4 &&
> >   	    !(xhci->quirks & XHCI_BROKEN_STREAMS))
> > -		xhci->shared_hcd->can_do_streams = 1;
> > +		usb3_hcd->can_do_streams = 1;
> >   
> > -	ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
> > -	if (ret)
> > -		goto dealloc_usb2_hcd;
> > +	if (xhci->shared_hcd) {
> > +		ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
> > +		if (ret)
> > +			goto put_usb3_hcd;
> > +	}
> >   
> >   	if (wakeup_irq > 0) {
> >   		ret = dev_pm_set_dedicated_wake_irq_reverse(dev,
> > wakeup_irq);
> 
> 	
> dev_pm_set_dedicated_wake_irq_reverse() can be called with just one
> hcd, if it fails
> it will goto dealloc_usb3_hcd:
> 
> dealloc_usb3_hcd:
> 	usb_remove_hcd(xhci->shared_hcd);   // xhci->shared_hcd may be
> null
> 	xhci->shared_hcd = NULL; // causes usb_put_hcd() issues if
> shared_hcd exists
> 
> put_usb3_hcd:
>          usb_put_hcd(xhci->shared_hcd); // shared_hcd may be set NULL
> above

I'll check it again, thanks

> 
> -Mathias
>