From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Mathias Nyman <mathias.nyman@intel.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
<linux-usb@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
"Eddie Hung" <eddie.hung@mediatek.com>
Subject: [PATCH] usb: host: xhci-mtk: omit shared hcd if either root hub has no ports
Date: Fri, 18 Nov 2022 19:01:16 +0800 [thread overview]
Message-ID: <20221118110116.20165-1-chunfeng.yun@mediatek.com> (raw)
There is error log when add a usb3 root hub without ports:
"hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)"
so omit the shared hcd if either of the root hubs has no ports, but
usually there is no usb3 port.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
drivers/usb/host/xhci-mtk.c | 72 +++++++++++++++++++++++--------------
1 file changed, 46 insertions(+), 26 deletions(-)
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 01705e559c42..cff3c4aea036 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -485,6 +485,7 @@ static int xhci_mtk_probe(struct platform_device *pdev)
const struct hc_driver *driver;
struct xhci_hcd *xhci;
struct resource *res;
+ struct usb_hcd *usb3_hcd;
struct usb_hcd *hcd;
int ret = -ENODEV;
int wakeup_irq;
@@ -593,6 +594,7 @@ static int xhci_mtk_probe(struct platform_device *pdev)
xhci = hcd_to_xhci(hcd);
xhci->main_hcd = hcd;
+ xhci->allow_single_roothub = 1;
/*
* imod_interval is the interrupt moderation value in nanoseconds.
@@ -602,24 +604,29 @@ static int xhci_mtk_probe(struct platform_device *pdev)
xhci->imod_interval = 5000;
device_property_read_u32(dev, "imod-interval-ns", &xhci->imod_interval);
- xhci->shared_hcd = usb_create_shared_hcd(driver, dev,
- dev_name(dev), hcd);
- if (!xhci->shared_hcd) {
- ret = -ENOMEM;
- goto disable_device_wakeup;
- }
-
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret)
- goto put_usb3_hcd;
+ goto disable_device_wakeup;
- if (HCC_MAX_PSA(xhci->hcc_params) >= 4 &&
+ if (!xhci_has_one_roothub(xhci)) {
+ xhci->shared_hcd = usb_create_shared_hcd(driver, dev,
+ dev_name(dev), hcd);
+ if (!xhci->shared_hcd) {
+ ret = -ENOMEM;
+ goto dealloc_usb2_hcd;
+ }
+ }
+
+ usb3_hcd = xhci_get_usb3_hcd(xhci);
+ if (usb3_hcd && HCC_MAX_PSA(xhci->hcc_params) >= 4 &&
!(xhci->quirks & XHCI_BROKEN_STREAMS))
- xhci->shared_hcd->can_do_streams = 1;
+ usb3_hcd->can_do_streams = 1;
- ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
- if (ret)
- goto dealloc_usb2_hcd;
+ if (xhci->shared_hcd) {
+ ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
+ if (ret)
+ goto put_usb3_hcd;
+ }
if (wakeup_irq > 0) {
ret = dev_pm_set_dedicated_wake_irq_reverse(dev, wakeup_irq);
@@ -641,13 +648,13 @@ static int xhci_mtk_probe(struct platform_device *pdev)
usb_remove_hcd(xhci->shared_hcd);
xhci->shared_hcd = NULL;
-dealloc_usb2_hcd:
- usb_remove_hcd(hcd);
-
put_usb3_hcd:
- xhci_mtk_sch_exit(mtk);
usb_put_hcd(xhci->shared_hcd);
+dealloc_usb2_hcd:
+ xhci_mtk_sch_exit(mtk);
+ usb_remove_hcd(hcd);
+
disable_device_wakeup:
device_init_wakeup(dev, false);
@@ -679,10 +686,15 @@ static int xhci_mtk_remove(struct platform_device *pdev)
dev_pm_clear_wake_irq(dev);
device_init_wakeup(dev, false);
- usb_remove_hcd(shared_hcd);
- xhci->shared_hcd = NULL;
+ if (shared_hcd) {
+ usb_remove_hcd(shared_hcd);
+ xhci->shared_hcd = NULL;
+ }
usb_remove_hcd(hcd);
- usb_put_hcd(shared_hcd);
+
+ if (shared_hcd)
+ usb_put_hcd(shared_hcd);
+
usb_put_hcd(hcd);
xhci_mtk_sch_exit(mtk);
clk_bulk_disable_unprepare(BULK_CLKS_NUM, mtk->clks);
@@ -700,13 +712,16 @@ static int __maybe_unused xhci_mtk_suspend(struct device *dev)
struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev);
struct usb_hcd *hcd = mtk->hcd;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct usb_hcd *shared_hcd = xhci->shared_hcd;
int ret;
xhci_dbg(xhci, "%s: stop port polling\n", __func__);
clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
del_timer_sync(&hcd->rh_timer);
- clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
- del_timer_sync(&xhci->shared_hcd->rh_timer);
+ if (shared_hcd) {
+ clear_bit(HCD_FLAG_POLL_RH, &shared_hcd->flags);
+ del_timer_sync(&shared_hcd->rh_timer);
+ }
ret = xhci_mtk_host_disable(mtk);
if (ret)
@@ -718,8 +733,10 @@ static int __maybe_unused xhci_mtk_suspend(struct device *dev)
restart_poll_rh:
xhci_dbg(xhci, "%s: restart port polling\n", __func__);
- set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
- usb_hcd_poll_rh_status(xhci->shared_hcd);
+ if (shared_hcd) {
+ set_bit(HCD_FLAG_POLL_RH, &shared_hcd->flags);
+ usb_hcd_poll_rh_status(shared_hcd);
+ }
set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
usb_hcd_poll_rh_status(hcd);
return ret;
@@ -730,6 +747,7 @@ static int __maybe_unused xhci_mtk_resume(struct device *dev)
struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev);
struct usb_hcd *hcd = mtk->hcd;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct usb_hcd *shared_hcd = xhci->shared_hcd;
int ret;
usb_wakeup_set(mtk, false);
@@ -742,8 +760,10 @@ static int __maybe_unused xhci_mtk_resume(struct device *dev)
goto disable_clks;
xhci_dbg(xhci, "%s: restart port polling\n", __func__);
- set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
- usb_hcd_poll_rh_status(xhci->shared_hcd);
+ if (shared_hcd) {
+ set_bit(HCD_FLAG_POLL_RH, &shared_hcd->flags);
+ usb_hcd_poll_rh_status(shared_hcd);
+ }
set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
usb_hcd_poll_rh_status(hcd);
return 0;
--
2.18.0
next reply other threads:[~2022-11-18 11:02 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-18 11:01 Chunfeng Yun [this message]
2022-11-21 9:05 ` [PATCH] usb: host: xhci-mtk: omit shared hcd if either root hub has no ports AngeloGioacchino Del Regno
2022-11-23 11:10 ` Mathias Nyman
2022-11-24 5:49 ` Chunfeng Yun (云春峰)
2022-11-24 10:38 ` Chunfeng Yun (云春峰)
2022-11-25 6:58 ` Macpaul Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221118110116.20165-1-chunfeng.yun@mediatek.com \
--to=chunfeng.yun@mediatek.com \
--cc=eddie.hung@mediatek.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=matthias.bgg@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox