From: Nicolas Boichat <drinkcat@chromium.org>
To: linux-mediatek@lists.infradead.org
Cc: Sean Wang <sean.wang@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Chuanjia Liu <Chuanjia.Liu@mediatek.com>,
evgreen@chromium.org, swboyd@chromium.org
Subject: [PATCH 1/2] pinctrl: mediatek: Ignore interrupts that are wake only during resume
Date: Mon, 29 Apr 2019 11:55:14 +0800 [thread overview]
Message-ID: <20190429035515.73611-2-drinkcat@chromium.org> (raw)
In-Reply-To: <20190429035515.73611-1-drinkcat@chromium.org>
Before suspending, mtk-eint would set the interrupt mask to the
one in wake_mask. However, some of these interrupts may not have a
corresponding interrupt handler, or the interrupt may be disabled.
On resume, the eint irq handler would trigger nevertheless,
and irq/pm.c:irq_pm_check_wakeup would be called, which would
try to call irq_disable. However, if the interrupt is not enabled
(irqd_irq_disabled(&desc->irq_data) is true), the call does nothing,
and the interrupt is left enabled in the eint driver.
Especially for level-sensitive interrupts, this will lead to an
interrupt storm on resume.
If we detect that an interrupt is only in wake_mask, but not in
cur_mask, we can just mask it out immediately (as mtk_eint_resume
would do anyway at a later stage in the resume sequence, when
restoring cur_mask).
Fixes: bf22ff45bed ("genirq: Avoid unnecessary low level irq function calls")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
---
drivers/pinctrl/mediatek/mtk-eint.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/mediatek/mtk-eint.c b/drivers/pinctrl/mediatek/mtk-eint.c
index f464f8cd274b75c..737385e86beb807 100644
--- a/drivers/pinctrl/mediatek/mtk-eint.c
+++ b/drivers/pinctrl/mediatek/mtk-eint.c
@@ -318,7 +318,7 @@ static void mtk_eint_irq_handler(struct irq_desc *desc)
struct irq_chip *chip = irq_desc_get_chip(desc);
struct mtk_eint *eint = irq_desc_get_handler_data(desc);
unsigned int status, eint_num;
- int offset, index, virq;
+ int offset, mask_offset, index, virq;
void __iomem *reg = mtk_eint_get_offset(eint, 0, eint->regs->stat);
int dual_edge, start_level, curr_level;
@@ -328,10 +328,24 @@ static void mtk_eint_irq_handler(struct irq_desc *desc)
status = readl(reg);
while (status) {
offset = __ffs(status);
+ mask_offset = eint_num >> 5;
index = eint_num + offset;
virq = irq_find_mapping(eint->domain, index);
status &= ~BIT(offset);
+ /*
+ * If we get an interrupt on pin that was only required
+ * for wake (but no real interrupt requested), mask the
+ * interrupt (as would mtk_eint_resume do anyway later
+ * in the resume sequence).
+ */
+ if (eint->wake_mask[mask_offset] & BIT(offset) &&
+ !(eint->cur_mask[mask_offset] & BIT(offset))) {
+ writel_relaxed(BIT(offset), reg -
+ eint->regs->stat +
+ eint->regs->mask_set);
+ }
+
dual_edge = eint->dual_edge[index];
if (dual_edge) {
/*
--
2.21.0.593.g511ec345e18-goog
next prev parent reply other threads:[~2019-04-29 3:55 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-29 3:55 [PATCH 0/2] pinctrl: mediatek: Fix 2 issues related to resume from wake sources Nicolas Boichat
2019-04-29 3:55 ` Nicolas Boichat [this message]
2019-06-21 4:47 ` [PATCH 1/2] pinctrl: mediatek: Ignore interrupts that are wake only during resume Sean Wang
2019-06-25 13:50 ` Linus Walleij
2019-04-29 3:55 ` [PATCH 2/2] pinctrl: mediatek: Update cur_mask in mask/mask ops Nicolas Boichat
2019-05-13 22:29 ` Stephen Boyd
2019-05-14 1:37 ` Nicolas Boichat
2019-05-14 20:14 ` Stephen Boyd
2019-05-15 8:04 ` Nicolas Boichat
2019-05-30 17:12 ` Evan Green
2019-05-31 8:05 ` Chuanjia Liu
2019-05-31 17:17 ` Evan Green
2019-06-03 8:01 ` Chuanjia Liu
2019-06-04 0:57 ` Nicolas Boichat
2019-06-05 7:11 ` Chuanjia Liu
2019-06-10 22:25 ` Stephen Boyd
2019-06-21 4:20 ` Sean Wang
2019-06-25 13:52 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190429035515.73611-2-drinkcat@chromium.org \
--to=drinkcat@chromium.org \
--cc=Chuanjia.Liu@mediatek.com \
--cc=evgreen@chromium.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=sean.wang@kernel.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox