From: Nicolas Boichat <drinkcat@chromium.org>
To: linux-mediatek@lists.infradead.org
Cc: Sean Wang <sean.wang@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Chuanjia Liu <Chuanjia.Liu@mediatek.com>,
evgreen@chromium.org, swboyd@chromium.org
Subject: [PATCH 2/2] pinctrl: mediatek: Update cur_mask in mask/mask ops
Date: Mon, 29 Apr 2019 11:55:15 +0800 [thread overview]
Message-ID: <20190429035515.73611-3-drinkcat@chromium.org> (raw)
In-Reply-To: <20190429035515.73611-1-drinkcat@chromium.org>
During suspend/resume, mtk_eint_mask may be called while
wake_mask is active. For example, this happens if a wake-source
with an active interrupt handler wakes the system:
irq/pm.c:irq_pm_check_wakeup would disable the interrupt, so
that it can be handled later on in the resume flow.
However, this may happen before mtk_eint_do_resume is called:
in this case, wake_mask is loaded, and cur_mask is restored
from an older copy, re-enabling the interrupt, and causing
an interrupt storm (especially for level interrupts).
Instead, we just record mask/unmask changes in cur_mask. This
also avoids the need to read the current mask in eint_do_suspend,
and we can remove mtk_eint_chip_read_mask function.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
---
drivers/pinctrl/mediatek/mtk-eint.c | 18 ++++--------------
1 file changed, 4 insertions(+), 14 deletions(-)
diff --git a/drivers/pinctrl/mediatek/mtk-eint.c b/drivers/pinctrl/mediatek/mtk-eint.c
index 737385e86beb807..7e526bcf5e0b55c 100644
--- a/drivers/pinctrl/mediatek/mtk-eint.c
+++ b/drivers/pinctrl/mediatek/mtk-eint.c
@@ -113,6 +113,8 @@ static void mtk_eint_mask(struct irq_data *d)
void __iomem *reg = mtk_eint_get_offset(eint, d->hwirq,
eint->regs->mask_set);
+ eint->cur_mask[d->hwirq >> 5] &= ~mask;
+
writel(mask, reg);
}
@@ -123,6 +125,8 @@ static void mtk_eint_unmask(struct irq_data *d)
void __iomem *reg = mtk_eint_get_offset(eint, d->hwirq,
eint->regs->mask_clr);
+ eint->cur_mask[d->hwirq >> 5] |= mask;
+
writel(mask, reg);
if (eint->dual_edge[d->hwirq])
@@ -217,19 +221,6 @@ static void mtk_eint_chip_write_mask(const struct mtk_eint *eint,
}
}
-static void mtk_eint_chip_read_mask(const struct mtk_eint *eint,
- void __iomem *base, u32 *buf)
-{
- int port;
- void __iomem *reg;
-
- for (port = 0; port < eint->hw->ports; port++) {
- reg = base + eint->regs->mask + (port << 2);
- buf[port] = ~readl_relaxed(reg);
- /* Mask is 0 when irq is enabled, and 1 when disabled. */
- }
-}
-
static int mtk_eint_irq_request_resources(struct irq_data *d)
{
struct mtk_eint *eint = irq_data_get_irq_chip_data(d);
@@ -384,7 +375,6 @@ static void mtk_eint_irq_handler(struct irq_desc *desc)
int mtk_eint_do_suspend(struct mtk_eint *eint)
{
- mtk_eint_chip_read_mask(eint, eint->base, eint->cur_mask);
mtk_eint_chip_write_mask(eint, eint->base, eint->wake_mask);
return 0;
--
2.21.0.593.g511ec345e18-goog
next prev parent reply other threads:[~2019-04-29 3:55 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-29 3:55 [PATCH 0/2] pinctrl: mediatek: Fix 2 issues related to resume from wake sources Nicolas Boichat
2019-04-29 3:55 ` [PATCH 1/2] pinctrl: mediatek: Ignore interrupts that are wake only during resume Nicolas Boichat
2019-06-21 4:47 ` Sean Wang
2019-06-25 13:50 ` Linus Walleij
2019-04-29 3:55 ` Nicolas Boichat [this message]
2019-05-13 22:29 ` [PATCH 2/2] pinctrl: mediatek: Update cur_mask in mask/mask ops Stephen Boyd
2019-05-14 1:37 ` Nicolas Boichat
2019-05-14 20:14 ` Stephen Boyd
2019-05-15 8:04 ` Nicolas Boichat
2019-05-30 17:12 ` Evan Green
2019-05-31 8:05 ` Chuanjia Liu
2019-05-31 17:17 ` Evan Green
2019-06-03 8:01 ` Chuanjia Liu
2019-06-04 0:57 ` Nicolas Boichat
2019-06-05 7:11 ` Chuanjia Liu
2019-06-10 22:25 ` Stephen Boyd
2019-06-21 4:20 ` Sean Wang
2019-06-25 13:52 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190429035515.73611-3-drinkcat@chromium.org \
--to=drinkcat@chromium.org \
--cc=Chuanjia.Liu@mediatek.com \
--cc=evgreen@chromium.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=sean.wang@kernel.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox