[PATCH v6 0/8] add driver for "boe, tv101wum-nl6", "boe, tv101wum-n53", "auo, kd101n80-45na" and "auo, b101uan08.3" panels

[PATCH v6 0/8] add driver for "boe, tv101wum-nl6", "boe, tv101wum-n53", "auo, kd101n80-45na" and "auo, b101uan08.3" panels

[Jitao Shi]

Changes since v5:
 - covert the documents to yaml
 - fine tune boe, tv101wum-n53 panel video timine

Changes since v4:
 - add auo,b101uan08.3 panel for this driver.
 - add boe,tv101wum-n53 panel for this driver.

Changes since v3:
 - remove check enable_gpio.
 - fine tune the auo,kd101n80-45na panel's power on timing.

Changes since v2:
 - correct the panel size
 - remove blank line in Kconfig
 - move auo,kd101n80-45na panel driver in this series.

Changes since v1:

 - update typo nl6 -> n16.
 - update new panel config and makefile are added in alphabetically order.
 - add the panel mode and panel info in driver data.
 - merge auo,kd101n80-45a and boe,tv101wum-nl6 in one driver

Jitao Shi (8):
  dt-bindings: display: panel: Add BOE tv101wum-n16 panel bindings
  drm/panel: support for BOE tv101wum-nl6 wuxga dsi video mode panel
  dt-bindings: display: panel: add auo kd101n80-45na panel bindings
  drm/panel: support for auo,kd101n80-45na wuxga dsi video mode panel
  dt-bindings: display: panel: add boe tv101wum-n53 panel documentation
  drm/panel: support for boe,tv101wum-n53 wuxga dsi video mode panel
  dt-bindings: display: panel: add AUO auo,b101uan08.3 panel
    documentation
  drm/panel: support for auo,b101uan08.3 wuxga dsi video mode panel

 .../display/panel/auo,b101uan08.3.yaml        |  67 ++
 .../display/panel/auo,kd101n80-45na.yaml      |  67 ++
 .../display/panel/boe,tv101wum-n53.yaml       |  67 ++
 .../display/panel/boe,tv101wum-nl6.yaml       |  67 ++
 drivers/gpu/drm/panel/Kconfig                 |   9 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-boe-tv101wum-nl6.c    | 876 ++++++++++++++++++
 7 files changed, 1154 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.yaml
 create mode 100644 Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.yaml
 create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-n53.yaml
 create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
 create mode 100644 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c

-- 
2.21.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 1/8] dt-bindings: display: panel: Add BOE tv101wum-n16 panel bindings

[Jitao Shi]

Add documentation for boe tv101wum-n16 panel.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
---
 .../display/panel/boe,tv101wum-nl6.yaml       | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
new file mode 100644
index 000000000000..31d394054181
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TV101WUM-Nl6 DSI Display Panel
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+  - Rob Herring <robh+dt@kernel.org>
+ 
+properties:
+  compatible:
+        const: boe,tv101wum-nl6
+
+  reg:
+    description: the virtual channel number of a DSI peripheral
+
+  enable-gpios:
+    description: a GPIO spec for the enable pin
+
+  pp1800-supply:
+    description: core voltage supply
+
+  avdd-supply:
+    description: phandle of the regulator that provides positive voltage
+
+  avee-supply:
+    description: phandle of the regulator that provides negative voltage
+
+  backlight:
+    description: phandle of the backlight device attached to the panel
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - pp1800-supply
+ - avdd-supply
+ - avee-supply
+ - backlight
+
+additionalProperties: false
+
+examples:
+  - |
+    &dsi {
+        panel@0 {
+            compatible = "boe,tv101wum-nl6";
+            reg = <0>;
+            enable-gpios = <&pio 45 0>;
+            avdd-supply = <&ppvarn_lcd>;
+            avee-supply = <&ppvarp_lcd>;
+            pp1800-supply = <&pp1800_lcd>;
+            backlight = <&backlight_lcd0>;
+            status = "okay";
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...
\ No newline at end of file
-- 
2.21.0

[PATCH v6 2/8] drm/panel: support for BOE tv101wum-nl6 wuxga dsi video mode panel

[Jitao Shi]

Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
---
 drivers/gpu/drm/panel/Kconfig                 |   9 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-boe-tv101wum-nl6.c    | 709 ++++++++++++++++++
 3 files changed, 719 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index d9d931aa6e26..afcadb3585fb 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -18,6 +18,15 @@ config DRM_PANEL_ARM_VERSATILE
 	  reference designs. The panel is detected using special registers
 	  in the Versatile family syscon registers.
 
+config DRM_PANEL_BOE_TV101WUM_NL6
+	tristate "BOE TV101WUM 1200x1920 panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to support for BOE TV101WUM WUXGA PANEL
+	  DSI Video Mode panel
+
 config DRM_PANEL_LVDS
 	tristate "Generic LVDS panel driver"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index fb0cb3aaa9e6..bd26b6ac039e 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o
+obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o
 obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
 obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
 obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o
diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
new file mode 100644
index 000000000000..e27529b80d78
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@@ -0,0 +1,709 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Jitao Shi <jitao.shi@mediatek.com>
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_crtc.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+
+#include <video/mipi_display.h>
+
+struct panel_desc {
+	const struct drm_display_mode *modes;
+	unsigned int bpc;
+
+	/**
+	 * @width_mm: width of the panel's active display area
+	 * @height_mm: height of the panel's active display area
+	 */
+	struct {
+		unsigned int width_mm;
+		unsigned int height_mm;
+	} size;
+
+	unsigned long mode_flags;
+	enum mipi_dsi_pixel_format format;
+	const struct panel_init_cmd *init_cmds;
+	unsigned int lanes;
+};
+
+struct boe_panel {
+	struct drm_panel base;
+	struct mipi_dsi_device *dsi;
+
+	const struct panel_desc *desc;
+
+	struct backlight_device *backlight;
+	struct regulator *pp1800;
+	struct regulator *avee;
+	struct regulator *avdd;
+	struct gpio_desc *enable_gpio;
+
+	bool prepared;
+	bool enabled;
+
+	const struct drm_display_mode *mode;
+};
+
+enum dsi_cmd_type {
+	INIT_DCS_CMD,
+	DELAY_CMD,
+};
+
+struct panel_init_cmd {
+	enum dsi_cmd_type type;
+	size_t len;
+	const char *data;
+};
+
+#define _INIT_DCS_CMD(...) { \
+	.type = INIT_DCS_CMD, \
+	.len = sizeof((char[]){__VA_ARGS__}), \
+	.data = (char[]){__VA_ARGS__} }
+
+#define _INIT_DELAY_CMD(...) { \
+	.type = DELAY_CMD,\
+	.len = sizeof((char[]){__VA_ARGS__}), \
+	.data = (char[]){__VA_ARGS__} }
+
+static const struct panel_init_cmd boe_init_cmd[] = {
+	_INIT_DELAY_CMD(24),
+	_INIT_DCS_CMD(0xB0, 0x05),
+	_INIT_DCS_CMD(0xB1, 0xE5),
+	_INIT_DCS_CMD(0xB3, 0x52),
+	_INIT_DCS_CMD(0xB0, 0x00),
+	_INIT_DCS_CMD(0xB3, 0x88),
+	_INIT_DCS_CMD(0xB0, 0x04),
+	_INIT_DCS_CMD(0xB8, 0x00),
+	_INIT_DCS_CMD(0xB0, 0x00),
+	_INIT_DCS_CMD(0xB6, 0x03),
+	_INIT_DCS_CMD(0xBA, 0x8B),
+	_INIT_DCS_CMD(0xBF, 0x1A),
+	_INIT_DCS_CMD(0xC0, 0x0F),
+	_INIT_DCS_CMD(0xC2, 0x0C),
+	_INIT_DCS_CMD(0xC3, 0x02),
+	_INIT_DCS_CMD(0xC4, 0x0C),
+	_INIT_DCS_CMD(0xC5, 0x02),
+	_INIT_DCS_CMD(0xB0, 0x01),
+	_INIT_DCS_CMD(0xE0, 0x26),
+	_INIT_DCS_CMD(0xE1, 0x26),
+	_INIT_DCS_CMD(0xDC, 0x00),
+	_INIT_DCS_CMD(0xDD, 0x00),
+	_INIT_DCS_CMD(0xCC, 0x26),
+	_INIT_DCS_CMD(0xCD, 0x26),
+	_INIT_DCS_CMD(0xC8, 0x00),
+	_INIT_DCS_CMD(0xC9, 0x00),
+	_INIT_DCS_CMD(0xD2, 0x03),
+	_INIT_DCS_CMD(0xD3, 0x03),
+	_INIT_DCS_CMD(0xE6, 0x04),
+	_INIT_DCS_CMD(0xE7, 0x04),
+	_INIT_DCS_CMD(0xC4, 0x09),
+	_INIT_DCS_CMD(0xC5, 0x09),
+	_INIT_DCS_CMD(0xD8, 0x0A),
+	_INIT_DCS_CMD(0xD9, 0x0A),
+	_INIT_DCS_CMD(0xC2, 0x0B),
+	_INIT_DCS_CMD(0xC3, 0x0B),
+	_INIT_DCS_CMD(0xD6, 0x0C),
+	_INIT_DCS_CMD(0xD7, 0x0C),
+	_INIT_DCS_CMD(0xC0, 0x05),
+	_INIT_DCS_CMD(0xC1, 0x05),
+	_INIT_DCS_CMD(0xD4, 0x06),
+	_INIT_DCS_CMD(0xD5, 0x06),
+	_INIT_DCS_CMD(0xCA, 0x07),
+	_INIT_DCS_CMD(0xCB, 0x07),
+	_INIT_DCS_CMD(0xDE, 0x08),
+	_INIT_DCS_CMD(0xDF, 0x08),
+	_INIT_DCS_CMD(0xB0, 0x02),
+	_INIT_DCS_CMD(0xC0, 0x00),
+	_INIT_DCS_CMD(0xC1, 0x0D),
+	_INIT_DCS_CMD(0xC2, 0x17),
+	_INIT_DCS_CMD(0xC3, 0x26),
+	_INIT_DCS_CMD(0xC4, 0x31),
+	_INIT_DCS_CMD(0xC5, 0x1C),
+	_INIT_DCS_CMD(0xC6, 0x2C),
+	_INIT_DCS_CMD(0xC7, 0x33),
+	_INIT_DCS_CMD(0xC8, 0x31),
+	_INIT_DCS_CMD(0xC9, 0x37),
+	_INIT_DCS_CMD(0xCA, 0x37),
+	_INIT_DCS_CMD(0xCB, 0x37),
+	_INIT_DCS_CMD(0xCC, 0x39),
+	_INIT_DCS_CMD(0xCD, 0x2E),
+	_INIT_DCS_CMD(0xCE, 0x2F),
+	_INIT_DCS_CMD(0xCF, 0x2F),
+	_INIT_DCS_CMD(0xD0, 0x07),
+	_INIT_DCS_CMD(0xD2, 0x00),
+	_INIT_DCS_CMD(0xD3, 0x0D),
+	_INIT_DCS_CMD(0xD4, 0x17),
+	_INIT_DCS_CMD(0xD5, 0x26),
+	_INIT_DCS_CMD(0xD6, 0x31),
+	_INIT_DCS_CMD(0xD7, 0x3F),
+	_INIT_DCS_CMD(0xD8, 0x3F),
+	_INIT_DCS_CMD(0xD9, 0x3F),
+	_INIT_DCS_CMD(0xDA, 0x3F),
+	_INIT_DCS_CMD(0xDB, 0x37),
+	_INIT_DCS_CMD(0xDC, 0x37),
+	_INIT_DCS_CMD(0xDD, 0x37),
+	_INIT_DCS_CMD(0xDE, 0x39),
+	_INIT_DCS_CMD(0xDF, 0x2E),
+	_INIT_DCS_CMD(0xE0, 0x2F),
+	_INIT_DCS_CMD(0xE1, 0x2F),
+	_INIT_DCS_CMD(0xE2, 0x07),
+	_INIT_DCS_CMD(0xB0, 0x03),
+	_INIT_DCS_CMD(0xC8, 0x0B),
+	_INIT_DCS_CMD(0xC9, 0x07),
+	_INIT_DCS_CMD(0xC3, 0x00),
+	_INIT_DCS_CMD(0xE7, 0x00),
+	_INIT_DCS_CMD(0xC5, 0x2A),
+	_INIT_DCS_CMD(0xDE, 0x2A),
+	_INIT_DCS_CMD(0xCA, 0x43),
+	_INIT_DCS_CMD(0xC9, 0x07),
+	_INIT_DCS_CMD(0xE4, 0xC0),
+	_INIT_DCS_CMD(0xE5, 0x0D),
+	_INIT_DCS_CMD(0xCB, 0x00),
+	_INIT_DCS_CMD(0xB0, 0x06),
+	_INIT_DCS_CMD(0xB8, 0xA5),
+	_INIT_DCS_CMD(0xC0, 0xA5),
+	_INIT_DCS_CMD(0xC7, 0x0F),
+	_INIT_DCS_CMD(0xD5, 0x32),
+	_INIT_DCS_CMD(0xB8, 0x00),
+	_INIT_DCS_CMD(0xC0, 0x00),
+	_INIT_DCS_CMD(0xBC, 0x00),
+	_INIT_DCS_CMD(0xB0, 0x07),
+	_INIT_DCS_CMD(0xB1, 0x00),
+	_INIT_DCS_CMD(0xB2, 0x02),
+	_INIT_DCS_CMD(0xB3, 0x0F),
+	_INIT_DCS_CMD(0xB4, 0x25),
+	_INIT_DCS_CMD(0xB5, 0x39),
+	_INIT_DCS_CMD(0xB6, 0x4E),
+	_INIT_DCS_CMD(0xB7, 0x72),
+	_INIT_DCS_CMD(0xB8, 0x97),
+	_INIT_DCS_CMD(0xB9, 0xDC),
+	_INIT_DCS_CMD(0xBA, 0x22),
+	_INIT_DCS_CMD(0xBB, 0xA4),
+	_INIT_DCS_CMD(0xBC, 0x2B),
+	_INIT_DCS_CMD(0xBD, 0x2F),
+	_INIT_DCS_CMD(0xBE, 0xA9),
+	_INIT_DCS_CMD(0xBF, 0x25),
+	_INIT_DCS_CMD(0xC0, 0x61),
+	_INIT_DCS_CMD(0xC1, 0x97),
+	_INIT_DCS_CMD(0xC2, 0xB2),
+	_INIT_DCS_CMD(0xC3, 0xCD),
+	_INIT_DCS_CMD(0xC4, 0xD9),
+	_INIT_DCS_CMD(0xC5, 0xE7),
+	_INIT_DCS_CMD(0xC6, 0xF4),
+	_INIT_DCS_CMD(0xC7, 0xFA),
+	_INIT_DCS_CMD(0xC8, 0xFC),
+	_INIT_DCS_CMD(0xC9, 0x00),
+	_INIT_DCS_CMD(0xCA, 0x00),
+	_INIT_DCS_CMD(0xCB, 0x16),
+	_INIT_DCS_CMD(0xCC, 0xAF),
+	_INIT_DCS_CMD(0xCD, 0xFF),
+	_INIT_DCS_CMD(0xCE, 0xFF),
+	_INIT_DCS_CMD(0xB0, 0x08),
+	_INIT_DCS_CMD(0xB1, 0x04),
+	_INIT_DCS_CMD(0xB2, 0x05),
+	_INIT_DCS_CMD(0xB3, 0x11),
+	_INIT_DCS_CMD(0xB4, 0x24),
+	_INIT_DCS_CMD(0xB5, 0x39),
+	_INIT_DCS_CMD(0xB6, 0x4F),
+	_INIT_DCS_CMD(0xB7, 0x72),
+	_INIT_DCS_CMD(0xB8, 0x98),
+	_INIT_DCS_CMD(0xB9, 0xDC),
+	_INIT_DCS_CMD(0xBA, 0x23),
+	_INIT_DCS_CMD(0xBB, 0xA6),
+	_INIT_DCS_CMD(0xBC, 0x2C),
+	_INIT_DCS_CMD(0xBD, 0x30),
+	_INIT_DCS_CMD(0xBE, 0xAA),
+	_INIT_DCS_CMD(0xBF, 0x26),
+	_INIT_DCS_CMD(0xC0, 0x62),
+	_INIT_DCS_CMD(0xC1, 0x9B),
+	_INIT_DCS_CMD(0xC2, 0xB5),
+	_INIT_DCS_CMD(0xC3, 0xCF),
+	_INIT_DCS_CMD(0xC4, 0xDB),
+	_INIT_DCS_CMD(0xC5, 0xE8),
+	_INIT_DCS_CMD(0xC6, 0xF5),
+	_INIT_DCS_CMD(0xC7, 0xFA),
+	_INIT_DCS_CMD(0xC8, 0xFC),
+	_INIT_DCS_CMD(0xC9, 0x00),
+	_INIT_DCS_CMD(0xCA, 0x00),
+	_INIT_DCS_CMD(0xCB, 0x16),
+	_INIT_DCS_CMD(0xCC, 0xAF),
+	_INIT_DCS_CMD(0xCD, 0xFF),
+	_INIT_DCS_CMD(0xCE, 0xFF),
+	_INIT_DCS_CMD(0xB0, 0x09),
+	_INIT_DCS_CMD(0xB1, 0x04),
+	_INIT_DCS_CMD(0xB2, 0x02),
+	_INIT_DCS_CMD(0xB3, 0x16),
+	_INIT_DCS_CMD(0xB4, 0x24),
+	_INIT_DCS_CMD(0xB5, 0x3B),
+	_INIT_DCS_CMD(0xB6, 0x4F),
+	_INIT_DCS_CMD(0xB7, 0x73),
+	_INIT_DCS_CMD(0xB8, 0x99),
+	_INIT_DCS_CMD(0xB9, 0xE0),
+	_INIT_DCS_CMD(0xBA, 0x26),
+	_INIT_DCS_CMD(0xBB, 0xAD),
+	_INIT_DCS_CMD(0xBC, 0x36),
+	_INIT_DCS_CMD(0xBD, 0x3A),
+	_INIT_DCS_CMD(0xBE, 0xAE),
+	_INIT_DCS_CMD(0xBF, 0x2A),
+	_INIT_DCS_CMD(0xC0, 0x66),
+	_INIT_DCS_CMD(0xC1, 0x9E),
+	_INIT_DCS_CMD(0xC2, 0xB8),
+	_INIT_DCS_CMD(0xC3, 0xD1),
+	_INIT_DCS_CMD(0xC4, 0xDD),
+	_INIT_DCS_CMD(0xC5, 0xE9),
+	_INIT_DCS_CMD(0xC6, 0xF6),
+	_INIT_DCS_CMD(0xC7, 0xFA),
+	_INIT_DCS_CMD(0xC8, 0xFC),
+	_INIT_DCS_CMD(0xC9, 0x00),
+	_INIT_DCS_CMD(0xCA, 0x00),
+	_INIT_DCS_CMD(0xCB, 0x16),
+	_INIT_DCS_CMD(0xCC, 0xAF),
+	_INIT_DCS_CMD(0xCD, 0xFF),
+	_INIT_DCS_CMD(0xCE, 0xFF),
+	_INIT_DCS_CMD(0xB0, 0x0A),
+	_INIT_DCS_CMD(0xB1, 0x00),
+	_INIT_DCS_CMD(0xB2, 0x02),
+	_INIT_DCS_CMD(0xB3, 0x0F),
+	_INIT_DCS_CMD(0xB4, 0x25),
+	_INIT_DCS_CMD(0xB5, 0x39),
+	_INIT_DCS_CMD(0xB6, 0x4E),
+	_INIT_DCS_CMD(0xB7, 0x72),
+	_INIT_DCS_CMD(0xB8, 0x97),
+	_INIT_DCS_CMD(0xB9, 0xDC),
+	_INIT_DCS_CMD(0xBA, 0x22),
+	_INIT_DCS_CMD(0xBB, 0xA4),
+	_INIT_DCS_CMD(0xBC, 0x2B),
+	_INIT_DCS_CMD(0xBD, 0x2F),
+	_INIT_DCS_CMD(0xBE, 0xA9),
+	_INIT_DCS_CMD(0xBF, 0x25),
+	_INIT_DCS_CMD(0xC0, 0x61),
+	_INIT_DCS_CMD(0xC1, 0x97),
+	_INIT_DCS_CMD(0xC2, 0xB2),
+	_INIT_DCS_CMD(0xC3, 0xCD),
+	_INIT_DCS_CMD(0xC4, 0xD9),
+	_INIT_DCS_CMD(0xC5, 0xE7),
+	_INIT_DCS_CMD(0xC6, 0xF4),
+	_INIT_DCS_CMD(0xC7, 0xFA),
+	_INIT_DCS_CMD(0xC8, 0xFC),
+	_INIT_DCS_CMD(0xC9, 0x00),
+	_INIT_DCS_CMD(0xCA, 0x00),
+	_INIT_DCS_CMD(0xCB, 0x16),
+	_INIT_DCS_CMD(0xCC, 0xAF),
+	_INIT_DCS_CMD(0xCD, 0xFF),
+	_INIT_DCS_CMD(0xCE, 0xFF),
+	_INIT_DCS_CMD(0xB0, 0x0B),
+	_INIT_DCS_CMD(0xB1, 0x04),
+	_INIT_DCS_CMD(0xB2, 0x05),
+	_INIT_DCS_CMD(0xB3, 0x11),
+	_INIT_DCS_CMD(0xB4, 0x24),
+	_INIT_DCS_CMD(0xB5, 0x39),
+	_INIT_DCS_CMD(0xB6, 0x4F),
+	_INIT_DCS_CMD(0xB7, 0x72),
+	_INIT_DCS_CMD(0xB8, 0x98),
+	_INIT_DCS_CMD(0xB9, 0xDC),
+	_INIT_DCS_CMD(0xBA, 0x23),
+	_INIT_DCS_CMD(0xBB, 0xA6),
+	_INIT_DCS_CMD(0xBC, 0x2C),
+	_INIT_DCS_CMD(0xBD, 0x30),
+	_INIT_DCS_CMD(0xBE, 0xAA),
+	_INIT_DCS_CMD(0xBF, 0x26),
+	_INIT_DCS_CMD(0xC0, 0x62),
+	_INIT_DCS_CMD(0xC1, 0x9B),
+	_INIT_DCS_CMD(0xC2, 0xB5),
+	_INIT_DCS_CMD(0xC3, 0xCF),
+	_INIT_DCS_CMD(0xC4, 0xDB),
+	_INIT_DCS_CMD(0xC5, 0xE8),
+	_INIT_DCS_CMD(0xC6, 0xF5),
+	_INIT_DCS_CMD(0xC7, 0xFA),
+	_INIT_DCS_CMD(0xC8, 0xFC),
+	_INIT_DCS_CMD(0xC9, 0x00),
+	_INIT_DCS_CMD(0xCA, 0x00),
+	_INIT_DCS_CMD(0xCB, 0x16),
+	_INIT_DCS_CMD(0xCC, 0xAF),
+	_INIT_DCS_CMD(0xCD, 0xFF),
+	_INIT_DCS_CMD(0xCE, 0xFF),
+	_INIT_DCS_CMD(0xB0, 0x0C),
+	_INIT_DCS_CMD(0xB1, 0x04),
+	_INIT_DCS_CMD(0xB2, 0x02),
+	_INIT_DCS_CMD(0xB3, 0x16),
+	_INIT_DCS_CMD(0xB4, 0x24),
+	_INIT_DCS_CMD(0xB5, 0x3B),
+	_INIT_DCS_CMD(0xB6, 0x4F),
+	_INIT_DCS_CMD(0xB7, 0x73),
+	_INIT_DCS_CMD(0xB8, 0x99),
+	_INIT_DCS_CMD(0xB9, 0xE0),
+	_INIT_DCS_CMD(0xBA, 0x26),
+	_INIT_DCS_CMD(0xBB, 0xAD),
+	_INIT_DCS_CMD(0xBC, 0x36),
+	_INIT_DCS_CMD(0xBD, 0x3A),
+	_INIT_DCS_CMD(0xBE, 0xAE),
+	_INIT_DCS_CMD(0xBF, 0x2A),
+	_INIT_DCS_CMD(0xC0, 0x66),
+	_INIT_DCS_CMD(0xC1, 0x9E),
+	_INIT_DCS_CMD(0xC2, 0xB8),
+	_INIT_DCS_CMD(0xC3, 0xD1),
+	_INIT_DCS_CMD(0xC4, 0xDD),
+	_INIT_DCS_CMD(0xC5, 0xE9),
+	_INIT_DCS_CMD(0xC6, 0xF6),
+	_INIT_DCS_CMD(0xC7, 0xFA),
+	_INIT_DCS_CMD(0xC8, 0xFC),
+	_INIT_DCS_CMD(0xC9, 0x00),
+	_INIT_DCS_CMD(0xCA, 0x00),
+	_INIT_DCS_CMD(0xCB, 0x16),
+	_INIT_DCS_CMD(0xCC, 0xAF),
+	_INIT_DCS_CMD(0xCD, 0xFF),
+	_INIT_DCS_CMD(0xCE, 0xFF),
+	_INIT_DCS_CMD(0xB0, 0x00),
+	_INIT_DCS_CMD(0xB3, 0x08),
+	_INIT_DCS_CMD(0xB0, 0x04),
+	_INIT_DCS_CMD(0xB8, 0x68),
+	_INIT_DELAY_CMD(150),
+	{},
+};
+
+static inline struct boe_panel *to_boe_panel(struct drm_panel *panel)
+{
+	return container_of(panel, struct boe_panel, base);
+}
+
+static int boe_panel_init(struct boe_panel *boe)
+{
+	struct mipi_dsi_device *dsi = boe->dsi;
+	struct drm_panel *panel = &boe->base;
+	int err, i;
+
+	if (boe->desc->init_cmds) {
+		const struct panel_init_cmd *init_cmds = boe->desc->init_cmds;
+
+		for (i = 0; init_cmds[i].len != 0; i++) {
+			const struct panel_init_cmd *cmd = &init_cmds[i];
+
+			switch (cmd->type) {
+			case DELAY_CMD:
+				msleep(cmd->data[0]);
+				err = 0;
+				break;
+
+			case INIT_DCS_CMD:
+				err = mipi_dsi_dcs_write(dsi, cmd->data[0],
+							 cmd->len <= 1 ? NULL :
+							 &cmd->data[1],
+							 cmd->len - 1);
+				break;
+			}
+
+			if (err < 0) {
+				dev_err(panel->dev,
+					"failed to write command %u\n", i);
+				return err;
+			}
+		}
+	}
+	return 0;
+}
+
+static int boe_panel_off(struct boe_panel *boe)
+{
+	struct mipi_dsi_device *dsi = boe->dsi;
+	int ret;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int boe_panel_disable(struct drm_panel *panel)
+{
+	struct boe_panel *boe = to_boe_panel(panel);
+
+	if (!boe->enabled)
+		return 0;
+
+	backlight_disable(boe->backlight);
+
+	boe->enabled = false;
+
+	return 0;
+}
+
+static int boe_panel_unprepare(struct drm_panel *panel)
+{
+	struct boe_panel *boe = to_boe_panel(panel);
+	int ret;
+
+	if (!boe->prepared)
+		return 0;
+
+	ret = boe_panel_off(boe);
+	if (ret < 0) {
+		dev_err(panel->dev, "failed to set panel off: %d\n", ret);
+		return ret;
+	}
+
+	msleep(150);
+	gpiod_set_value(boe->enable_gpio, 0);
+	usleep_range(500, 1000);
+	regulator_disable(boe->avee);
+	regulator_disable(boe->avdd);
+	usleep_range(5000, 7000);
+	regulator_disable(boe->pp1800);
+
+	boe->prepared = false;
+
+	return 0;
+}
+
+static int boe_panel_prepare(struct drm_panel *panel)
+{
+	struct boe_panel *boe = to_boe_panel(panel);
+	int ret;
+
+	if (boe->prepared)
+		return 0;
+
+	gpiod_set_value(boe->enable_gpio, 0);
+	usleep_range(1000, 1500);
+
+	ret = regulator_enable(boe->pp1800);
+	if (ret < 0)
+		return ret;
+
+	usleep_range(3000, 5000);
+
+	ret = regulator_enable(boe->avdd);
+	if (ret < 0)
+		goto poweroff1v8;
+	ret = regulator_enable(boe->avee);
+	if (ret < 0)
+		goto poweroffavdd;
+
+	msleep(100);
+
+	gpiod_set_value(boe->enable_gpio, 1);
+	usleep_range(10000, 12000);
+
+	ret = boe_panel_init(boe);
+	if (ret < 0) {
+		dev_err(panel->dev, "failed to init panel: %d\n", ret);
+		goto poweroff;
+	}
+
+	boe->prepared = true;
+
+	return 0;
+
+poweroff:
+	regulator_disable(boe->avee);
+poweroffavdd:
+	regulator_disable(boe->avdd);
+poweroff1v8:
+	usleep_range(5000, 7000);
+	regulator_disable(boe->pp1800);
+	gpiod_set_value(boe->enable_gpio, 0);
+
+	return ret;
+}
+
+static int boe_panel_enable(struct drm_panel *panel)
+{
+	struct boe_panel *boe = to_boe_panel(panel);
+	int ret;
+
+	if (boe->enabled)
+		return 0;
+
+	ret = backlight_enable(boe->backlight);
+	if (ret) {
+		dev_err(panel->dev, "Failed to enable backlight %d\n",
+			ret);
+		return ret;
+	}
+
+	boe->enabled = true;
+
+	return 0;
+}
+
+static const struct drm_display_mode boe_tv101wum_nl6_default_mode = {
+	.clock = 159425,
+	.hdisplay = 1200,
+	.hsync_start = 1200 + 100,
+	.hsync_end = 1200 + 100 + 40,
+	.htotal = 1200 + 100 + 40 + 24,
+	.vdisplay = 1920,
+	.vsync_start = 1920 + 10,
+	.vsync_end = 1920 + 10 + 14,
+	.vtotal = 1920 + 10 + 14 + 4,
+	.vrefresh = 60,
+};
+
+static const struct panel_desc boe_tv101wum_nl6_desc = {
+	.modes = &boe_tv101wum_nl6_default_mode,
+	.bpc = 8,
+	.size = {
+		.width_mm = 135,
+		.height_mm = 216,
+	},
+	.lanes = 4,
+	.format = MIPI_DSI_FMT_RGB888,
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+		      MIPI_DSI_MODE_LPM,
+	.init_cmds = boe_init_cmd,
+};
+
+static int boe_panel_get_modes(struct drm_panel *panel)
+{
+	struct boe_panel *boe = to_boe_panel(panel);
+	const struct drm_display_mode *m = boe->desc->modes;
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(panel->drm, m);
+	if (!mode) {
+		dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
+			m->hdisplay, m->vdisplay, m->vrefresh);
+		return -ENOMEM;
+	}
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	drm_mode_set_name(mode);
+	drm_mode_probed_add(panel->connector, mode);
+
+	panel->connector->display_info.width_mm = boe->desc->size.width_mm;
+	panel->connector->display_info.height_mm = boe->desc->size.height_mm;
+	panel->connector->display_info.bpc = boe->desc->bpc;
+
+	return 1;
+}
+
+static const struct drm_panel_funcs boe_panel_funcs = {
+	.disable = boe_panel_disable,
+	.unprepare = boe_panel_unprepare,
+	.prepare = boe_panel_prepare,
+	.enable = boe_panel_enable,
+	.get_modes = boe_panel_get_modes,
+};
+
+static int boe_panel_add(struct boe_panel *boe)
+{
+	struct device *dev = &boe->dsi->dev;
+
+	boe->avdd = devm_regulator_get(dev, "avdd");
+	if (IS_ERR(boe->avdd))
+		return PTR_ERR(boe->avdd);
+
+	boe->avee = devm_regulator_get(dev, "avee");
+	if (IS_ERR(boe->avee))
+		return PTR_ERR(boe->avee);
+
+	boe->pp1800 = devm_regulator_get(dev, "pp1800");
+	if (IS_ERR(boe->pp1800))
+		return PTR_ERR(boe->pp1800);
+
+	boe->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(boe->enable_gpio)) {
+		dev_err(dev, "cannot get reset-gpios %ld\n",
+			PTR_ERR(boe->enable_gpio));
+		return PTR_ERR(boe->enable_gpio);
+	}
+
+	gpiod_set_value(boe->enable_gpio, 0);
+
+	boe->backlight = devm_of_find_backlight(dev);
+	if (IS_ERR(boe->backlight))
+		return PTR_ERR(boe->backlight);
+
+	drm_panel_init(&boe->base);
+	boe->base.funcs = &boe_panel_funcs;
+	boe->base.dev = &boe->dsi->dev;
+
+	return drm_panel_add(&boe->base);
+}
+
+static int boe_panel_probe(struct mipi_dsi_device *dsi)
+{
+	struct boe_panel *boe;
+	int ret;
+	const struct panel_desc *desc;
+
+	boe = devm_kzalloc(&dsi->dev, sizeof(*boe), GFP_KERNEL);
+	if (!boe)
+		return -ENOMEM;
+
+	desc = of_device_get_match_data(&dsi->dev);
+	dsi->lanes = desc->lanes;
+	dsi->format = desc->format;
+	dsi->mode_flags = desc->mode_flags;
+	boe->desc = desc;
+	boe->dsi = dsi;
+	ret = boe_panel_add(boe);
+	if (ret < 0)
+		return ret;
+
+	mipi_dsi_set_drvdata(dsi, boe);
+
+	return mipi_dsi_attach(dsi);
+}
+
+static int boe_panel_remove(struct mipi_dsi_device *dsi)
+{
+	struct boe_panel *boe = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	ret = boe_panel_disable(&boe->base);
+	if (ret < 0)
+		dev_err(&dsi->dev, "failed to disable panel: %d\n", ret);
+
+	ret = mipi_dsi_detach(dsi);
+	if (ret < 0)
+		dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret);
+
+	if (boe->base.dev)
+		drm_panel_remove(&boe->base);
+
+	return 0;
+}
+
+static void boe_panel_shutdown(struct mipi_dsi_device *dsi)
+{
+	struct boe_panel *boe = mipi_dsi_get_drvdata(dsi);
+
+	boe_panel_disable(&boe->base);
+}
+
+static const struct of_device_id boe_of_match[] = {
+	{ .compatible = "boe,tv101wum-nl6",
+	  .data = &boe_tv101wum_nl6_desc
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, boe_of_match);
+
+static struct mipi_dsi_driver boe_panel_driver = {
+	.driver = {
+		.name = "panel-boe-tv101wum-nl6",
+		.of_match_table = boe_of_match,
+	},
+	.probe = boe_panel_probe,
+	.remove = boe_panel_remove,
+	.shutdown = boe_panel_shutdown,
+};
+module_mipi_dsi_driver(boe_panel_driver);
+
+MODULE_AUTHOR("Jitao Shi <jitao.shi@mediatek.com>");
+MODULE_DESCRIPTION("BOE tv101wum-nl6 1200x1920 video mode panel driver");
+MODULE_LICENSE("GPL v2");
-- 
2.21.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 3/8] dt-bindings: display: panel: add auo kd101n80-45na panel bindings

[Jitao Shi]

Add documentation for auo kd101n80-45na panel.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
---
 .../display/panel/auo,kd101n80-45na.yaml      | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.yaml b/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.yaml
new file mode 100644
index 000000000000..caf82765fa0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/auo,kd101n80-45na.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AUO KD101N80-45NA DSI Display Panel
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+  - Rob Herring <robh+dt@kernel.org>
+ 
+properties:
+  compatible:
+        const: auo,kd101n80-45na
+
+  reg:
+    description: the virtual channel number of a DSI peripheral
+
+  enable-gpios:
+    description: a GPIO spec for the enable pin
+
+  pp1800-supply:
+    description: core voltage supply
+
+  avdd-supply:
+    description: phandle of the regulator that provides positive voltage
+
+  avee-supply:
+    description: phandle of the regulator that provides negative voltage
+
+  backlight:
+    description: phandle of the backlight device attached to the panel
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - pp1800-supply
+ - avdd-supply
+ - avee-supply
+ - backlight
+
+additionalProperties: false
+
+examples:
+  - |
+    &dsi {
+        panel@0 {
+            compatible = "auo,kd101n80-45na";
+            reg = <0>;
+            enable-gpios = <&pio 45 0>;
+            avdd-supply = <&ppvarn_lcd>;
+            avee-supply = <&ppvarp_lcd>;
+            pp1800-supply = <&pp1800_lcd>;
+            backlight = <&backlight_lcd0>;
+            status = "okay";
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...
\ No newline at end of file
-- 
2.21.0

[PATCH v6 4/8] drm/panel: support for auo,kd101n80-45na wuxga dsi video mode panel

[Jitao Shi]

Auo,kd101n80-45na's connector is same as boe,tv101wum-nl6.
The most codes can be reuse.
So auo,kd101n80-45na and boe,tv101wum-nl6 use one driver file.
Add the different parts in driver data.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
 drivers/gpu/drm/panel/Kconfig                 |  6 +-
 .../gpu/drm/panel/panel-boe-tv101wum-nl6.c    | 86 ++++++++++++++++---
 2 files changed, 75 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index afcadb3585fb..0e887c978796 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -19,13 +19,13 @@ config DRM_PANEL_ARM_VERSATILE
 	  in the Versatile family syscon registers.
 
 config DRM_PANEL_BOE_TV101WUM_NL6
-	tristate "BOE TV101WUM 1200x1920 panel"
+	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
 	depends on OF
 	depends on DRM_MIPI_DSI
 	depends on BACKLIGHT_CLASS_DEVICE
 	help
-	  Say Y here if you want to support for BOE TV101WUM WUXGA PANEL
-	  DSI Video Mode panel
+	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
+	  45NA WUXGA PANEL DSI Video Mode panel
 
 config DRM_PANEL_LVDS
 	tristate "Generic LVDS panel driver"
diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
index e27529b80d78..f80974778360 100644
--- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@@ -35,6 +35,7 @@ struct panel_desc {
 	enum mipi_dsi_pixel_format format;
 	const struct panel_init_cmd *init_cmds;
 	unsigned int lanes;
+	bool discharge_on_disable;
 };
 
 struct boe_panel {
@@ -372,6 +373,15 @@ static const struct panel_init_cmd boe_init_cmd[] = {
 	{},
 };
 
+static const struct panel_init_cmd auo_kd101n80_45na_init_cmd[] = {
+	_INIT_DELAY_CMD(24),
+	_INIT_DCS_CMD(0x11),
+	_INIT_DELAY_CMD(120),
+	_INIT_DCS_CMD(0x29),
+	_INIT_DELAY_CMD(120),
+	{},
+};
+
 static inline struct boe_panel *to_boe_panel(struct drm_panel *panel)
 {
 	return container_of(panel, struct boe_panel, base);
@@ -449,20 +459,30 @@ static int boe_panel_unprepare(struct drm_panel *panel)
 	if (!boe->prepared)
 		return 0;
 
-	ret = boe_panel_off(boe);
-	if (ret < 0) {
-		dev_err(panel->dev, "failed to set panel off: %d\n", ret);
-		return ret;
+	if (boe->desc->discharge_on_disable) {
+		msleep(150);
+		regulator_disable(boe->avee);
+		regulator_disable(boe->avdd);
+		usleep_range(5000, 7000);
+		gpiod_set_value(boe->enable_gpio, 0);
+		usleep_range(5000, 7000);
+		regulator_disable(boe->pp1800);
+	} else {
+		ret = boe_panel_off(boe);
+		if (ret < 0) {
+			dev_err(panel->dev, "failed to set panel off: %d\n",
+				ret);
+			return ret;
+		}
+		msleep(150);
+		gpiod_set_value(boe->enable_gpio, 0);
+		usleep_range(500, 1000);
+		regulator_disable(boe->avee);
+		regulator_disable(boe->avdd);
+		usleep_range(5000, 7000);
+		regulator_disable(boe->pp1800);
 	}
 
-	msleep(150);
-	gpiod_set_value(boe->enable_gpio, 0);
-	usleep_range(500, 1000);
-	regulator_disable(boe->avee);
-	regulator_disable(boe->avdd);
-	usleep_range(5000, 7000);
-	regulator_disable(boe->pp1800);
-
 	boe->prepared = false;
 
 	return 0;
@@ -492,10 +512,14 @@ static int boe_panel_prepare(struct drm_panel *panel)
 	if (ret < 0)
 		goto poweroffavdd;
 
-	msleep(100);
+	usleep_range(5000, 10000);
 
 	gpiod_set_value(boe->enable_gpio, 1);
-	usleep_range(10000, 12000);
+	usleep_range(1000, 2000);
+	gpiod_set_value(boe->enable_gpio, 0);
+	usleep_range(1000, 2000);
+	gpiod_set_value(boe->enable_gpio, 1);
+	usleep_range(6000, 10000);
 
 	ret = boe_panel_init(boe);
 	if (ret < 0) {
@@ -527,6 +551,8 @@ static int boe_panel_enable(struct drm_panel *panel)
 	if (boe->enabled)
 		return 0;
 
+	msleep(70);
+
 	ret = backlight_enable(boe->backlight);
 	if (ret) {
 		dev_err(panel->dev, "Failed to enable backlight %d\n",
@@ -564,6 +590,35 @@ static const struct panel_desc boe_tv101wum_nl6_desc = {
 	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
 		      MIPI_DSI_MODE_LPM,
 	.init_cmds = boe_init_cmd,
+	.discharge_on_disable = false,
+};
+
+static const struct drm_display_mode auo_kd101n80_45na_default_mode = {
+	.clock = 157000,
+	.hdisplay = 1200,
+	.hsync_start = 1200 + 80,
+	.hsync_end = 1200 + 80 + 24,
+	.htotal = 1200 + 80 + 24 + 36,
+	.vdisplay = 1920,
+	.vsync_start = 1920 + 16,
+	.vsync_end = 1920 + 16 + 4,
+	.vtotal = 1920 + 16 + 4 + 16,
+	.vrefresh = 60,
+};
+
+static const struct panel_desc auo_kd101n80_45na_desc = {
+	.modes = &auo_kd101n80_45na_default_mode,
+	.bpc = 8,
+	.size = {
+		.width_mm = 135,
+		.height_mm = 216,
+	},
+	.lanes = 4,
+	.format = MIPI_DSI_FMT_RGB888,
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+		      MIPI_DSI_MODE_LPM,
+	.init_cmds = auo_kd101n80_45na_init_cmd,
+	.discharge_on_disable = true,
 };
 
 static int boe_panel_get_modes(struct drm_panel *panel)
@@ -689,6 +744,9 @@ static const struct of_device_id boe_of_match[] = {
 	{ .compatible = "boe,tv101wum-nl6",
 	  .data = &boe_tv101wum_nl6_desc
 	},
+	{ .compatible = "auo,kd101n80-45na",
+	  .data = &auo_kd101n80_45na_desc
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, boe_of_match);
-- 
2.21.0

[PATCH v6 5/8] dt-bindings: display: panel: add boe tv101wum-n53 panel documentation

[Jitao Shi]

Add dcumentation for boe,tv101wum-n53, which is mipi dsi video panel
and resolution is 1200x1920.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
 .../display/panel/boe,tv101wum-n53.yaml       | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-n53.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-n53.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-n53.yaml
new file mode 100644
index 000000000000..f541446fc70c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-n53.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-n53.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TV101WUM-N53 DSI Display Panel
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+  - Rob Herring <robh+dt@kernel.org>
+ 
+properties:
+  compatible:
+        const: boe,tv101wum-n53
+
+  reg:
+    description: the virtual channel number of a DSI peripheral
+
+  enable-gpios:
+    description: a GPIO spec for the enable pin
+
+  pp1800-supply:
+    description: core voltage supply
+
+  avdd-supply:
+    description: phandle of the regulator that provides positive voltage
+
+  avee-supply:
+    description: phandle of the regulator that provides negative voltage
+
+  backlight:
+    description: phandle of the backlight device attached to the panel
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - pp1800-supply
+ - avdd-supply
+ - avee-supply
+ - backlight
+
+additionalProperties: false
+
+examples:
+  - |
+    &dsi {
+        panel@0 {
+            compatible = "boe,tv101wum-n53";
+            reg = <0>;
+            enable-gpios = <&pio 45 0>;
+            avdd-supply = <&ppvarn_lcd>;
+            avee-supply = <&ppvarp_lcd>;
+            pp1800-supply = <&pp1800_lcd>;
+            backlight = <&backlight_lcd0>;
+            status = "okay";
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...
\ No newline at end of file
-- 
2.21.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 6/8] drm/panel: support for boe, tv101wum-n53 wuxga dsi video mode panel

[Jitao Shi]

Boe,tv101wum-n53's connector is same as boe,tv101wum-nl6.
The most codes can be reuse.
So boe,tv101wum-n53 and boe,tv101wum-nl6 use one driver file.
Add the different parts in driver data.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
 .../gpu/drm/panel/panel-boe-tv101wum-nl6.c    | 31 +++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
index f80974778360..c757035ac09c 100644
--- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@@ -621,6 +621,34 @@ static const struct panel_desc auo_kd101n80_45na_desc = {
 	.discharge_on_disable = true,
 };
 
+static const struct drm_display_mode boe_tv101wum_n53_default_mode = {
+	.clock = 159833,
+	.hdisplay = 1200,
+	.hsync_start = 1200 + 114,
+	.hsync_end = 1200 + 114 + 10,
+	.htotal = 1200 + 114 + 10 + 40,
+	.vdisplay = 1920,
+	.vsync_start = 1920 + 19,
+	.vsync_end = 1920 + 19 + 4,
+	.vtotal = 1920 + 19 + 4 + 10,
+	.vrefresh = 60,
+	.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static const struct panel_desc boe_tv101wum_n53_desc = {
+	.modes = &boe_tv101wum_n53_default_mode,
+	.bpc = 8,
+	.size = {
+		.width_mm = 135,
+		.height_mm = 216,
+	},
+	.lanes = 4,
+	.format = MIPI_DSI_FMT_RGB888,
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+		      MIPI_DSI_MODE_LPM,
+	.init_cmds = boe_init_cmd,
+};
+
 static int boe_panel_get_modes(struct drm_panel *panel)
 {
 	struct boe_panel *boe = to_boe_panel(panel);
@@ -747,6 +775,9 @@ static const struct of_device_id boe_of_match[] = {
 	{ .compatible = "auo,kd101n80-45na",
 	  .data = &auo_kd101n80_45na_desc
 	},
+	{ .compatible = "boe,tv101wum-n53",
+	  .data = &boe_tv101wum_n53_desc
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, boe_of_match);
-- 
2.21.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 7/8] dt-bindings: display: panel: add AUO auo,b101uan08.3 panel documentation

[Jitao Shi]

Add dcumentation for auo,b101uan08.3, which is mipi dsi video panel
and resolution is 1200x1920.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
 .../display/panel/auo,b101uan08.3.yaml        | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.yaml b/Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.yaml
new file mode 100644
index 000000000000..96125d7d1fe7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/auo,b101uan08.3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AUO B101UAN08.3 DSI Display Panel
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+  - Rob Herring <robh+dt@kernel.org>
+ 
+properties:
+  compatible:
+        const: auo,b101uan08.3
+
+  reg:
+    description: the virtual channel number of a DSI peripheral
+
+  enable-gpios:
+    description: a GPIO spec for the enable pin
+
+  pp1800-supply:
+    description: core voltage supply
+
+  avdd-supply:
+    description: phandle of the regulator that provides positive voltage
+
+  avee-supply:
+    description: phandle of the regulator that provides negative voltage
+
+  backlight:
+    description: phandle of the backlight device attached to the panel
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - pp1800-supply
+ - avdd-supply
+ - avee-supply
+ - backlight
+
+additionalProperties: false
+
+examples:
+  - |
+    &dsi {
+        panel@0 {
+            compatible = "auo,b101uan08.3";
+            reg = <0>;
+            enable-gpios = <&pio 45 0>;
+            avdd-supply = <&ppvarn_lcd>;
+            avee-supply = <&ppvarp_lcd>;
+            pp1800-supply = <&pp1800_lcd>;
+            backlight = <&backlight_lcd0>;
+            status = "okay";
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...
\ No newline at end of file
-- 
2.21.0

[PATCH v6 8/8] drm/panel: support for auo,b101uan08.3 wuxga dsi video mode panel

[Jitao Shi]

Auo,auo,b101uan08.3's connector is same as boe,tv101wum-nl6.
The most codes can be reuse.
So auo,b101uan08.3 and boe,tv101wum-nl6 use one driver file.
Add the different parts in driver data.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
 .../gpu/drm/panel/panel-boe-tv101wum-nl6.c    | 78 +++++++++++++++++++
 1 file changed, 78 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
index c757035ac09c..40dcb61ef423 100644
--- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@@ -382,6 +382,53 @@ static const struct panel_init_cmd auo_kd101n80_45na_init_cmd[] = {
 	{},
 };
 
+static const struct panel_init_cmd auo_b101uan08_3_init_cmd[] = {
+	_INIT_DELAY_CMD(24),
+	_INIT_DCS_CMD(0xB0, 0x01),
+	_INIT_DCS_CMD(0xC0, 0x48),
+	_INIT_DCS_CMD(0xC1, 0x48),
+	_INIT_DCS_CMD(0xC2, 0x47),
+	_INIT_DCS_CMD(0xC3, 0x47),
+	_INIT_DCS_CMD(0xC4, 0x46),
+	_INIT_DCS_CMD(0xC5, 0x46),
+	_INIT_DCS_CMD(0xC6, 0x45),
+	_INIT_DCS_CMD(0xC7, 0x45),
+	_INIT_DCS_CMD(0xC8, 0x64),
+	_INIT_DCS_CMD(0xC9, 0x64),
+	_INIT_DCS_CMD(0xCA, 0x4F),
+	_INIT_DCS_CMD(0xCB, 0x4F),
+	_INIT_DCS_CMD(0xCC, 0x40),
+	_INIT_DCS_CMD(0xCD, 0x40),
+	_INIT_DCS_CMD(0xCE, 0x66),
+	_INIT_DCS_CMD(0xCF, 0x66),
+	_INIT_DCS_CMD(0xD0, 0x4F),
+	_INIT_DCS_CMD(0xD1, 0x4F),
+	_INIT_DCS_CMD(0xD2, 0x41),
+	_INIT_DCS_CMD(0xD3, 0x41),
+	_INIT_DCS_CMD(0xD4, 0x48),
+	_INIT_DCS_CMD(0xD5, 0x48),
+	_INIT_DCS_CMD(0xD6, 0x47),
+	_INIT_DCS_CMD(0xD7, 0x47),
+	_INIT_DCS_CMD(0xD8, 0x46),
+	_INIT_DCS_CMD(0xD9, 0x46),
+	_INIT_DCS_CMD(0xDA, 0x45),
+	_INIT_DCS_CMD(0xDB, 0x45),
+	_INIT_DCS_CMD(0xDC, 0x64),
+	_INIT_DCS_CMD(0xDD, 0x64),
+	_INIT_DCS_CMD(0xDE, 0x4F),
+	_INIT_DCS_CMD(0xDF, 0x4F),
+	_INIT_DCS_CMD(0xE0, 0x40),
+	_INIT_DCS_CMD(0xE1, 0x40),
+	_INIT_DCS_CMD(0xE2, 0x66),
+	_INIT_DCS_CMD(0xE3, 0x66),
+	_INIT_DCS_CMD(0xE4, 0x4F),
+	_INIT_DCS_CMD(0xE5, 0x4F),
+	_INIT_DCS_CMD(0xE6, 0x41),
+	_INIT_DCS_CMD(0xE7, 0x41),
+	_INIT_DELAY_CMD(150),
+	{},
+};
+
 static inline struct boe_panel *to_boe_panel(struct drm_panel *panel)
 {
 	return container_of(panel, struct boe_panel, base);
@@ -649,6 +696,34 @@ static const struct panel_desc boe_tv101wum_n53_desc = {
 	.init_cmds = boe_init_cmd,
 };
 
+static const struct drm_display_mode auo_b101uan08_3_default_mode = {
+	.clock = 159667,
+	.hdisplay = 1200,
+	.hsync_start = 1200 + 60,
+	.hsync_end = 1200 + 60 + 4,
+	.htotal = 1200 + 60 + 4 + 80,
+	.vdisplay = 1920,
+	.vsync_start = 1920 + 34,
+	.vsync_end = 1920 + 34 + 2,
+	.vtotal = 1920 + 34 + 2 + 24,
+	.vrefresh = 60,
+	.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static const struct panel_desc auo_b101uan08_3_desc = {
+	.modes = &auo_b101uan08_3_default_mode,
+	.bpc = 8,
+	.size = {
+		.width_mm = 135,
+		.height_mm = 216,
+	},
+	.lanes = 4,
+	.format = MIPI_DSI_FMT_RGB888,
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+		      MIPI_DSI_MODE_LPM,
+	.init_cmds = auo_b101uan08_3_init_cmd,
+};
+
 static int boe_panel_get_modes(struct drm_panel *panel)
 {
 	struct boe_panel *boe = to_boe_panel(panel);
@@ -778,6 +853,9 @@ static const struct of_device_id boe_of_match[] = {
 	{ .compatible = "boe,tv101wum-n53",
 	  .data = &boe_tv101wum_n53_desc
 	},
+	{ .compatible = "auo,b101uan08.3",
+	  .data = &auo_b101uan08_3_desc
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, boe_of_match);
-- 
2.21.0

Re: [PATCH v6 2/8] drm/panel: support for BOE tv101wum-nl6 wuxga dsi video mode panel

[Sean Paul]

On Wed, Sep 18, 2019 at 08:24:16PM +0800, Jitao Shi wrote:
> Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel.
> 
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
> ---
>  drivers/gpu/drm/panel/Kconfig                 |   9 +
>  drivers/gpu/drm/panel/Makefile                |   1 +
>  .../gpu/drm/panel/panel-boe-tv101wum-nl6.c    | 709 ++++++++++++++++++
>  3 files changed, 719 insertions(+)
>  create mode 100644 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
> 
/snip

> diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
> new file mode 100644
> index 000000000000..e27529b80d78
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c

/snip

> +static int boe_panel_init(struct boe_panel *boe)
> +{
> +	struct mipi_dsi_device *dsi = boe->dsi;
> +	struct drm_panel *panel = &boe->base;
> +	int err, i;
> +
> +	if (boe->desc->init_cmds) {
> +		const struct panel_init_cmd *init_cmds = boe->desc->init_cmds;
> +
> +		for (i = 0; init_cmds[i].len != 0; i++) {
> +			const struct panel_init_cmd *cmd = &init_cmds[i];
> +
> +			switch (cmd->type) {
> +			case DELAY_CMD:
> +				msleep(cmd->data[0]);
> +				err = 0;
> +				break;
> +
> +			case INIT_DCS_CMD:
> +				err = mipi_dsi_dcs_write(dsi, cmd->data[0],
> +							 cmd->len <= 1 ? NULL :
> +							 &cmd->data[1],
> +							 cmd->len - 1);
> +				break;
> +			}
> +
> +			if (err < 0) {

err possibly used uninitialized here.

> +				dev_err(panel->dev,
> +					"failed to write command %u\n", i);
> +				return err;
> +			}
> +		}
> +	}
> +	return 0;
> +}
/snip

> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Sean Paul, Software Engineer, Google / Chromium OS