public inbox for linux-mediatek@lists.infradead.org
 help / color / mirror / Atom feed
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
To: Jitao Shi <jitao.shi@mediatek.com>,
	Bilal Wasim <bilalwasim676@gmail.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>
Cc: CK Hu <ck.hu@mediatek.com>,
	Chun-Kuang Hu <chunkuang.hu@kernel.org>,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
	dri-devel@lists.freedesktop.org
Subject: [PATCH] drm/mediatek: dsi: Modify horizontal front/back porch byte formula
Date: Fri, 20 Nov 2020 07:23:35 +0800	[thread overview]
Message-ID: <20201119232335.6704-1-chunkuang.hu@kernel.org> (raw)

From: CK Hu <ck.hu@mediatek.com>

In the patch to be fixed, horizontal_backporch_byte become to large
for some panel, so roll back that patch. For small hfp or hbp panel,
using vm->hfront_porch + vm->hback_porch to calculate
horizontal_backporch_byte would make it negtive, so
use horizontal_backporch_byte itself to make it positive.

Fixes: 35bf948f1edb ("drm/mediatek: dsi: Fix scrolling of panel with small hfp or hbp")

Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 61 +++++++++++-------------------
 1 file changed, 22 insertions(+), 39 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index 4a188a942c38..65fd99c528af 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -444,7 +444,10 @@ static void mtk_dsi_config_vdo_timing(struct mtk_dsi *dsi)
 	u32 horizontal_sync_active_byte;
 	u32 horizontal_backporch_byte;
 	u32 horizontal_frontporch_byte;
+	u32 horizontal_front_back_byte;
+	u32 data_phy_cycles_byte;
 	u32 dsi_tmp_buf_bpp, data_phy_cycles;
+	u32 delta;
 	struct mtk_phy_timing *timing = &dsi->phy_timing;
 
 	struct videomode *vm = &dsi->vm;
@@ -466,50 +469,30 @@ static void mtk_dsi_config_vdo_timing(struct mtk_dsi *dsi)
 	horizontal_sync_active_byte = (vm->hsync_len * dsi_tmp_buf_bpp - 10);
 
 	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
-		horizontal_backporch_byte = vm->hback_porch * dsi_tmp_buf_bpp;
+		horizontal_backporch_byte = vm->hback_porch * dsi_tmp_buf_bpp - 10;
 	else
 		horizontal_backporch_byte = (vm->hback_porch + vm->hsync_len) *
-					    dsi_tmp_buf_bpp;
+					    dsi_tmp_buf_bpp - 10;
 
 	data_phy_cycles = timing->lpx + timing->da_hs_prepare +
-			  timing->da_hs_zero + timing->da_hs_exit;
-
-	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) {
-		if ((vm->hfront_porch + vm->hback_porch) * dsi_tmp_buf_bpp >
-		    data_phy_cycles * dsi->lanes + 18) {
-			horizontal_frontporch_byte =
-				vm->hfront_porch * dsi_tmp_buf_bpp -
-				(data_phy_cycles * dsi->lanes + 18) *
-				vm->hfront_porch /
-				(vm->hfront_porch + vm->hback_porch);
-
-			horizontal_backporch_byte =
-				horizontal_backporch_byte -
-				(data_phy_cycles * dsi->lanes + 18) *
-				vm->hback_porch /
-				(vm->hfront_porch + vm->hback_porch);
-		} else {
-			DRM_WARN("HFP less than d-phy, FPS will under 60Hz\n");
-			horizontal_frontporch_byte = vm->hfront_porch *
-						     dsi_tmp_buf_bpp;
-		}
+			  timing->da_hs_zero + timing->da_hs_exit + 3;
+
+	delta = dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST ? 18 : 12;
+
+	horizontal_frontporch_byte = vm->hfront_porch * dsi_tmp_buf_bpp;
+	horizontal_front_back_byte = horizontal_frontporch_byte + horizontal_backporch_byte;
+	data_phy_cycles_byte = data_phy_cycles * dsi->lanes + delta;
+
+	if (horizontal_front_back_byte > data_phy_cycles_byte) {
+		horizontal_frontporch_byte -= data_phy_cycles_byte *
+					      horizontal_frontporch_byte /
+					      horizontal_front_back_byte;
+
+		horizontal_backporch_byte -= data_phy_cycles_byte *
+					     horizontal_backporch_byte /
+					     horizontal_front_back_byte;
 	} else {
-		if ((vm->hfront_porch + vm->hback_porch) * dsi_tmp_buf_bpp >
-		    data_phy_cycles * dsi->lanes + 12) {
-			horizontal_frontporch_byte =
-				vm->hfront_porch * dsi_tmp_buf_bpp -
-				(data_phy_cycles * dsi->lanes + 12) *
-				vm->hfront_porch /
-				(vm->hfront_porch + vm->hback_porch);
-			horizontal_backporch_byte = horizontal_backporch_byte -
-				(data_phy_cycles * dsi->lanes + 12) *
-				vm->hback_porch /
-				(vm->hfront_porch + vm->hback_porch);
-		} else {
-			DRM_WARN("HFP less than d-phy, FPS will under 60Hz\n");
-			horizontal_frontporch_byte = vm->hfront_porch *
-						     dsi_tmp_buf_bpp;
-		}
+		DRM_WARN("HFP + HBP less than d-phy, FPS will under 60Hz\n");
 	}
 
 	writel(horizontal_sync_active_byte, dsi->regs + DSI_HSA_WC);
-- 
2.17.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

             reply	other threads:[~2020-11-19 23:23 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-19 23:23 Chun-Kuang Hu [this message]
2020-11-20  0:29 ` [PATCH] drm/mediatek: dsi: Modify horizontal front/back porch byte formula Bilal Wasim
2020-11-21 10:37   ` Chun-Kuang Hu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201119232335.6704-1-chunkuang.hu@kernel.org \
    --to=chunkuang.hu@kernel.org \
    --cc=airlied@linux.ie \
    --cc=bilalwasim676@gmail.com \
    --cc=ck.hu@mediatek.com \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jitao.shi@mediatek.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=p.zabel@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox