From: bchihi@baylibre.com
To: daniel.lezcano@linaro.org, rafael@kernel.org, amitk@kernel.org,
rui.zhang@intel.com
Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
khilman@baylibre.com, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, james.lo@mediatek.com,
rex-bc.chen@mediatek.com
Subject: [PATCH v10 5/6] arm64/dts/mt8195: Add thermal zones and thermal nodes
Date: Thu, 12 Jan 2023 16:28:54 +0100 [thread overview]
Message-ID: <20230112152855.216072-6-bchihi@baylibre.com> (raw)
In-Reply-To: <20230112152855.216072-1-bchihi@baylibre.com>
From: Balsam CHIHI <bchihi@baylibre.com>
Add thermal zones and thermal nodes for the mt8195.
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
---
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 129 +++++++++++++++++++++++
1 file changed, 129 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 09df105f4606..683e5057d68d 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -14,6 +14,7 @@
#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
#include <dt-bindings/power/mt8195-power.h>
#include <dt-bindings/reset/mt8195-resets.h>
+#include <dt-bindings/thermal/mediatek-lvts.h>
/ {
compatible = "mediatek,mt8195";
@@ -954,6 +955,17 @@ spi0: spi@1100a000 {
status = "disabled";
};
+ lvts_ap: thermal-sensor@1100b000 {
+ compatible = "mediatek,mt8195-lvts-ap";
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+ resets = <&infracfg_ao MT8195_INFRA_RST0_THERM_CTRL_SWRST>;
+ nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
+ nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2";
+ #thermal-sensor-cells = <1>;
+ };
+
spi1: spi@11010000 {
compatible = "mediatek,mt8195-spi",
"mediatek,mt6765-spi";
@@ -1114,6 +1126,17 @@ mmc2: mmc@11250000 {
status = "disabled";
};
+ lvts_mcu: thermal-sensor@11278000 {
+ compatible = "mediatek,mt8195-lvts-mcu";
+ reg = <0 0x11278000 0 0x1000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+ resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
+ nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
+ nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2";
+ #thermal-sensor-cells = <1>;
+ };
+
xhci1: usb@11290000 {
compatible = "mediatek,mt8195-xhci",
"mediatek,mtk-xhci";
@@ -2387,4 +2410,110 @@ dp_tx: dp-tx@1c600000 {
status = "disabled";
};
};
+
+ thermal_zones: thermal-zones {
+ cpu0-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu MT819x_MCU_LITTLE_CPU0>;
+ trips {
+ cpu0_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu MT819x_MCU_LITTLE_CPU1>;
+ trips {
+ cpu1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu MT819x_MCU_LITTLE_CPU2>;
+ trips {
+ cpu2_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu3-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu MT819x_MCU_LITTLE_CPU3>;
+ trips {
+ cpu3_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu4-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu MT819x_MCU_BIG_CPU0>;
+ trips {
+ cpu4_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu5-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu MT819x_MCU_BIG_CPU1>;
+ trips {
+ cpu5_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu6-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu MT819x_MCU_BIG_CPU2>;
+ trips {
+ cpu6_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu7-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu MT819x_MCU_BIG_CPU3>;
+ trips {
+ cpu7_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
};
--
2.34.1
next prev parent reply other threads:[~2023-01-12 15:31 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-12 15:28 [PATCH v10 0/6] Add LVTS thermal architecture bchihi
2023-01-12 15:28 ` [PATCH v10 1/6] thermal/drivers/mediatek: Relocate driver to mediatek folder bchihi
2023-01-12 20:08 ` kernel test robot
2023-01-13 10:47 ` Daniel Lezcano
2023-01-12 15:28 ` [PATCH v10 2/6] dt-bindings/thermal/mediatek: Add dt-binding document for LVTS thermal controllers bchihi
2023-01-13 8:11 ` Krzysztof Kozlowski
2023-01-13 11:54 ` Matthias Brugger
2023-01-13 14:30 ` Balsam CHIHI
2023-01-16 10:38 ` AngeloGioacchino Del Regno
2023-01-16 11:05 ` Balsam CHIHI
2023-01-12 15:28 ` [PATCH v10 3/6] arm64/dts/mt8195: Add efuse node to mt8195 bchihi
2023-01-13 11:45 ` Matthias Brugger
2023-01-16 10:38 ` AngeloGioacchino Del Regno
2023-01-12 15:28 ` [PATCH v10 4/6] thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver bchihi
2023-01-16 10:50 ` AngeloGioacchino Del Regno
2023-01-16 11:08 ` Daniel Lezcano
2023-01-16 11:52 ` AngeloGioacchino Del Regno
2023-01-18 13:58 ` Balsam CHIHI
2023-01-18 14:30 ` Daniel Lezcano
2023-01-18 14:52 ` Balsam CHIHI
2023-01-18 14:37 ` Balsam CHIHI
2023-01-12 15:28 ` bchihi [this message]
2023-01-12 15:28 ` [PATCH v10 6/6] arm64/dts/mt8195: Add temperature mitigation threshold bchihi
2023-01-13 11:49 ` Matthias Brugger
2023-01-13 14:24 ` Balsam CHIHI
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230112152855.216072-6-bchihi@baylibre.com \
--to=bchihi@baylibre.com \
--cc=amitk@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=james.lo@mediatek.com \
--cc=khilman@baylibre.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=rex-bc.chen@mediatek.com \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox