From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
To: Trevor Wu <trevor.wu@mediatek.com>,
broonie@kernel.org, lgirdwood@gmail.com, tiwai@suse.com,
perex@perex.cz, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
matthias.bgg@gmail.com
Cc: alsa-devel@alsa-project.org, linux-mediatek@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 4/5] ASoC: mediatek: mt8188-mt6359: support new board with nau88255
Date: Wed, 17 May 2023 13:54:12 +0200 [thread overview]
Message-ID: <8b76c893-e7bc-7a99-b86d-74e3378f9b4e@collabora.com> (raw)
In-Reply-To: <20230517111534.32630-5-trevor.wu@mediatek.com>
Il 17/05/23 13:15, Trevor Wu ha scritto:
> This patch adds multiple i2s codecs support including NAU88L25,
> MAX98390, and the dumb amp like NAU8318 usage. In addition, dmic-codec
> is also added to skip the beginning pop noise.
>
> Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
> ---
> sound/soc/mediatek/Kconfig | 4 +
> sound/soc/mediatek/mt8188/mt8188-mt6359.c | 267 +++++++++++++++++++++-
> 2 files changed, 270 insertions(+), 1 deletion(-)
>
> diff --git a/sound/soc/mediatek/Kconfig b/sound/soc/mediatek/Kconfig
> index 4baac72677d9..4ea012342b52 100644
> --- a/sound/soc/mediatek/Kconfig
> +++ b/sound/soc/mediatek/Kconfig
> @@ -225,6 +225,10 @@ config SND_SOC_MT8188_MT6359
> depends on SND_SOC_MT8188 && MTK_PMIC_WRAP
> select SND_SOC_MT6359
> select SND_SOC_HDMI_CODEC
> + select SND_SOC_DMIC
> + select SND_SOC_MAX98390
> + select SND_SOC_NAU8315
> + select SND_SOC_NAU8825
> help
> This adds support for ASoC machine driver for MediaTek MT8188
> boards with the MT6359 and other I2S audio codecs.
> diff --git a/sound/soc/mediatek/mt8188/mt8188-mt6359.c b/sound/soc/mediatek/mt8188/mt8188-mt6359.c
> index 6c3f36e2fffd..15fce2741f01 100644
> --- a/sound/soc/mediatek/mt8188/mt8188-mt6359.c
> +++ b/sound/soc/mediatek/mt8188/mt8188-mt6359.c
> @@ -6,6 +6,7 @@
> * Author: Trevor Wu <trevor.wu@mediatek.com>
> */
>
> +#include <linux/input.h>
> #include <linux/module.h>
> #include <linux/of_device.h>
> #include <linux/pm_runtime.h>
> @@ -13,10 +14,25 @@
> #include <sound/pcm_params.h>
> #include <sound/soc.h>
> #include "mt8188-afe-common.h"
> +#include "../../codecs/nau8825.h"
> #include "../../codecs/mt6359.h"
> #include "../common/mtk-afe-platform-driver.h"
> #include "../common/mtk-soundcard-driver.h"
>
> +/*
> + * Maxim MAX98390
> + */
> +#define MAX98390_CODEC_DAI "max98390-aif1"
> +#define MAX98390_DEV0_NAME "max98390.0-0038" /* rear right */
> +#define MAX98390_DEV1_NAME "max98390.0-0039" /* rear left */
> +#define MAX98390_DEV2_NAME "max98390.0-003a" /* front right */
> +#define MAX98390_DEV3_NAME "max98390.0-003b" /* front left */
> +
> +/*
> + * Nau88l25
> + */
> +#define NAU8825_CODEC_DAI "nau8825-hifi"
> +
> /* FE */
> SND_SOC_DAILINK_DEFS(playback2,
> DAILINK_COMP_ARRAY(COMP_CPU("DL2")),
> @@ -143,12 +159,15 @@ SND_SOC_DAILINK_DEFS(pcm1,
> SND_SOC_DAILINK_DEFS(ul_src,
> DAILINK_COMP_ARRAY(COMP_CPU("UL_SRC")),
> DAILINK_COMP_ARRAY(COMP_CODEC("mt6359-sound",
> - "mt6359-snd-codec-aif1")),
> + "mt6359-snd-codec-aif1"),
> + COMP_CODEC("dmic-codec",
> + "dmic-hifi")),
> DAILINK_COMP_ARRAY(COMP_EMPTY()));
>
> struct mt8188_mt6359_priv {
> struct snd_soc_jack dp_jack;
> struct snd_soc_jack hdmi_jack;
> + struct snd_soc_jack headset_jack;
> };
>
> static struct snd_soc_jack_pin mt8188_hdmi_jack_pins[] = {
> @@ -165,11 +184,50 @@ static struct snd_soc_jack_pin mt8188_dp_jack_pins[] = {
> },
> };
>
> +static struct snd_soc_jack_pin nau8825_jack_pins[] = {
> + {
> + .pin = "Headphone",
One Intel driver using NAU8825 declares this as
.pin = "Headphone Jack",
can we please use the same name, so that we're able to eventually share the
same configuration in the userspace?
For reference, please check intel/avs/boards/nau8825.c
Thanks,
Angelo
next prev parent reply other threads:[~2023-05-17 11:54 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-17 11:15 [PATCH 0/5] ASoC: mt8188: add new board support Trevor Wu
2023-05-17 11:15 ` [PATCH 1/5] ASoC: mediatek: mt8188: separate ADDA playback dai from capture dai Trevor Wu
2023-05-17 11:40 ` AngeloGioacchino Del Regno
2023-05-17 12:13 ` Trevor Wu (吳文良)
2023-05-17 11:15 ` [PATCH 2/5] ASoC: mediatek: mt8188-mt6359: register hdmi/dp jack pins Trevor Wu
2023-05-17 11:31 ` AngeloGioacchino Del Regno
2023-05-17 12:10 ` Trevor Wu (吳文良)
2023-05-17 15:10 ` AngeloGioacchino Del Regno
2023-05-18 2:01 ` Trevor Wu (吳文良)
2023-05-17 11:15 ` [PATCH 3/5] ASoC: mediatek: common: soundcard driver add dai_fmt support Trevor Wu
2023-05-17 11:48 ` AngeloGioacchino Del Regno
2023-05-17 12:28 ` Trevor Wu (吳文良)
2023-05-17 11:15 ` [PATCH 4/5] ASoC: mediatek: mt8188-mt6359: support new board with nau88255 Trevor Wu
2023-05-17 11:54 ` AngeloGioacchino Del Regno [this message]
2023-05-17 12:41 ` Trevor Wu (吳文良)
2023-05-17 11:15 ` [PATCH 5/5] ASoC: dt-bindings: mediatek,mt8188-mt6359: update properties Trevor Wu
2023-05-17 14:43 ` Krzysztof Kozlowski
2023-05-18 2:37 ` Trevor Wu (吳文良)
2023-05-18 7:36 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8b76c893-e7bc-7a99-b86d-74e3378f9b4e@collabora.com \
--to=angelogioacchino.delregno@collabora.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=tiwai@suse.com \
--cc=trevor.wu@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox