From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
To: Trevor Wu <trevor.wu@mediatek.com>,
broonie@kernel.org, lgirdwood@gmail.com, tiwai@suse.com,
perex@perex.cz, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
matthias.bgg@gmail.com
Cc: alsa-devel@alsa-project.org, linux-mediatek@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 3/5] ASoC: mediatek: common: soundcard driver add dai_fmt support
Date: Wed, 17 May 2023 13:48:00 +0200 [thread overview]
Message-ID: <daac5c71-e6d3-04b0-f628-c53a4e12640d@collabora.com> (raw)
In-Reply-To: <20230517111534.32630-4-trevor.wu@mediatek.com>
Il 17/05/23 13:15, Trevor Wu ha scritto:
> There are two changes included in the patch.
>
> First, add set_dailink_daifmt() function, so dai_fmt can be updated by
> the configuration in dai-link sub node.
>
> Second, remove codec phandle from required property in dai-link sub node.
> For example, user possibly needs to update dai-format for all etdm
> co-clock dai-links, but codec doesn't need to be specified in capture
> dai-link for a speaker amp.
>
> Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
> ---
> .../mediatek/common/mtk-soundcard-driver.c | 49 ++++++++++++++++++-
> 1 file changed, 48 insertions(+), 1 deletion(-)
>
> diff --git a/sound/soc/mediatek/common/mtk-soundcard-driver.c b/sound/soc/mediatek/common/mtk-soundcard-driver.c
> index 738093451ccb..5e291092046b 100644
> --- a/sound/soc/mediatek/common/mtk-soundcard-driver.c
> +++ b/sound/soc/mediatek/common/mtk-soundcard-driver.c
> @@ -22,7 +22,7 @@ static int set_card_codec_info(struct snd_soc_card *card,
>
> codec_node = of_get_child_by_name(sub_node, "codec");
> if (!codec_node)
> - return -EINVAL;
> + return 0;
>
> /* set card codec info */
> ret = snd_soc_of_get_dai_link_codecs(dev, codec_node, dai_link);
> @@ -36,6 +36,47 @@ static int set_card_codec_info(struct snd_soc_card *card,
> return 0;
> }
>
> +static int set_dailink_daifmt(struct snd_soc_card *card,
> + struct device_node *sub_node,
> + struct snd_soc_dai_link *dai_link)
> +{
> + unsigned int daifmt;
> + const char *str;
> + int ret;
> + struct {
> + char *name;
> + unsigned int val;
> + } of_clk_table[] = {
> + { "cpu", SND_SOC_DAIFMT_CBC_CFC },
> + { "codec", SND_SOC_DAIFMT_CBP_CFP },
> + };
> +
This is an optional property and this function should not do anything if that
property is not found, so....
/*
* Check "mediatek,clk-provider" to select the clock provider
* in SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK area, if specified.
*/
if (!of_property_read_string(sub_node, "mediatek,clk-provider", &str))
return 0;
...this allows you to reduce indentation as well.
> + daifmt = snd_soc_daifmt_parse_format(sub_node, NULL);
> + if (daifmt) {
> + dai_link->dai_fmt &= SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK;
> + dai_link->dai_fmt |= daifmt;
> + }
> +
> + /*
> + * check "mediatek,clk-provider = xxx"
> + * SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK area
> + */
> + ret = of_property_read_string(sub_node, "mediatek,clk-provider", &str);
> + if (ret == 0) {
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(of_clk_table); i++) {
> + if (strcmp(str, of_clk_table[i].name) == 0) {
> + dai_link->dai_fmt &= ~SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK;
> + dai_link->dai_fmt |= of_clk_table[i].val;
> + break;
> + }
> + }
> + }
> +
> + return 0;
> +}
> +
> int parse_dai_link_info(struct snd_soc_card *card)
> {
> struct device *dev = card->dev;
> @@ -67,6 +108,12 @@ int parse_dai_link_info(struct snd_soc_card *card)
> of_node_put(sub_node);
> return ret;
> }
> +
> + ret = set_dailink_daifmt(card, sub_node, dai_link);
> + if (ret < 0) {
if (ret) {
...
}
> + of_node_put(sub_node);
> + return ret;
> + }
Regards,
Angelo
next prev parent reply other threads:[~2023-05-17 11:48 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-17 11:15 [PATCH 0/5] ASoC: mt8188: add new board support Trevor Wu
2023-05-17 11:15 ` [PATCH 1/5] ASoC: mediatek: mt8188: separate ADDA playback dai from capture dai Trevor Wu
2023-05-17 11:40 ` AngeloGioacchino Del Regno
2023-05-17 12:13 ` Trevor Wu (吳文良)
2023-05-17 11:15 ` [PATCH 2/5] ASoC: mediatek: mt8188-mt6359: register hdmi/dp jack pins Trevor Wu
2023-05-17 11:31 ` AngeloGioacchino Del Regno
2023-05-17 12:10 ` Trevor Wu (吳文良)
2023-05-17 15:10 ` AngeloGioacchino Del Regno
2023-05-18 2:01 ` Trevor Wu (吳文良)
2023-05-17 11:15 ` [PATCH 3/5] ASoC: mediatek: common: soundcard driver add dai_fmt support Trevor Wu
2023-05-17 11:48 ` AngeloGioacchino Del Regno [this message]
2023-05-17 12:28 ` Trevor Wu (吳文良)
2023-05-17 11:15 ` [PATCH 4/5] ASoC: mediatek: mt8188-mt6359: support new board with nau88255 Trevor Wu
2023-05-17 11:54 ` AngeloGioacchino Del Regno
2023-05-17 12:41 ` Trevor Wu (吳文良)
2023-05-17 11:15 ` [PATCH 5/5] ASoC: dt-bindings: mediatek,mt8188-mt6359: update properties Trevor Wu
2023-05-17 14:43 ` Krzysztof Kozlowski
2023-05-18 2:37 ` Trevor Wu (吳文良)
2023-05-18 7:36 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=daac5c71-e6d3-04b0-f628-c53a4e12640d@collabora.com \
--to=angelogioacchino.delregno@collabora.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=tiwai@suse.com \
--cc=trevor.wu@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox