* [PATCH AUTOSEL 5.19 18/64] scsi: ufs: ufs-mediatek: Fix the timing of configuring device regulators
[not found] <20220814152437.2374207-1-sashal@kernel.org>
@ 2022-08-14 15:23 ` Sasha Levin
2022-08-14 15:24 ` [PATCH AUTOSEL 5.19 54/64] ARM: 9202/1: kasan: support CONFIG_KASAN_VMALLOC Sasha Levin
2022-08-14 15:24 ` [PATCH AUTOSEL 5.19 55/64] ARM: 9203/1: kconfig: fix MODULE_PLTS for KASAN with KASAN_VMALLOC Sasha Levin
2 siblings, 0 replies; 5+ messages in thread
From: Sasha Levin @ 2022-08-14 15:23 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Po-Wen Kao, Stanley Chu, Martin K . Petersen, Sasha Levin, jejb,
matthias.bgg, linux-scsi, linux-mediatek, linux-arm-kernel
From: Po-Wen Kao <powen.kao@mediatek.com>
[ Upstream commit 3fd23b8dfb54d9b74eba6dfdd3225db3ac116785 ]
Currently the LPM configurations of device regulators may not work since
VCC is not disabled yet while ufs_mtk_vreg_set_lpm() is executed.
Fix this by changing the timing of invoking ufs_mtk_vreg_set_lpm().
Link: https://lore.kernel.org/r/20220616053725.5681-5-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/ufs/host/ufs-mediatek.c | 58 ++++++++++++++++++++++++++++++---
1 file changed, 53 insertions(+), 5 deletions(-)
diff --git a/drivers/ufs/host/ufs-mediatek.c b/drivers/ufs/host/ufs-mediatek.c
index beabc3ccd30b..8b9daa281cc4 100644
--- a/drivers/ufs/host/ufs-mediatek.c
+++ b/drivers/ufs/host/ufs-mediatek.c
@@ -1026,7 +1026,6 @@ static int ufs_mtk_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op,
* ufshcd_suspend() re-enabling regulators while vreg is still
* in low-power mode.
*/
- ufs_mtk_vreg_set_lpm(hba, true);
err = ufs_mtk_mphy_power_on(hba, false);
if (err)
goto fail;
@@ -1050,12 +1049,13 @@ static int ufs_mtk_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
{
int err;
+ if (hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL)
+ ufs_mtk_vreg_set_lpm(hba, false);
+
err = ufs_mtk_mphy_power_on(hba, true);
if (err)
goto fail;
- ufs_mtk_vreg_set_lpm(hba, false);
-
if (ufshcd_is_link_hibern8(hba)) {
err = ufs_mtk_link_set_hpm(hba);
if (err)
@@ -1220,9 +1220,57 @@ static int ufs_mtk_remove(struct platform_device *pdev)
return 0;
}
+int ufs_mtk_system_suspend(struct device *dev)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+ int ret;
+
+ ret = ufshcd_system_suspend(dev);
+ if (ret)
+ return ret;
+
+ ufs_mtk_vreg_set_lpm(hba, true);
+
+ return 0;
+}
+
+int ufs_mtk_system_resume(struct device *dev)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+
+ ufs_mtk_vreg_set_lpm(hba, false);
+
+ return ufshcd_system_resume(dev);
+}
+
+int ufs_mtk_runtime_suspend(struct device *dev)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+ int ret = 0;
+
+ ret = ufshcd_runtime_suspend(dev);
+ if (ret)
+ return ret;
+
+ ufs_mtk_vreg_set_lpm(hba, true);
+
+ return 0;
+}
+
+int ufs_mtk_runtime_resume(struct device *dev)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+
+ ufs_mtk_vreg_set_lpm(hba, false);
+
+ return ufshcd_runtime_resume(dev);
+}
+
static const struct dev_pm_ops ufs_mtk_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(ufshcd_system_suspend, ufshcd_system_resume)
- SET_RUNTIME_PM_OPS(ufshcd_runtime_suspend, ufshcd_runtime_resume, NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(ufs_mtk_system_suspend,
+ ufs_mtk_system_resume)
+ SET_RUNTIME_PM_OPS(ufs_mtk_runtime_suspend,
+ ufs_mtk_runtime_resume, NULL)
.prepare = ufshcd_suspend_prepare,
.complete = ufshcd_resume_complete,
};
--
2.35.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH AUTOSEL 5.19 54/64] ARM: 9202/1: kasan: support CONFIG_KASAN_VMALLOC
[not found] <20220814152437.2374207-1-sashal@kernel.org>
2022-08-14 15:23 ` [PATCH AUTOSEL 5.19 18/64] scsi: ufs: ufs-mediatek: Fix the timing of configuring device regulators Sasha Levin
@ 2022-08-14 15:24 ` Sasha Levin
2022-08-16 14:45 ` Ard Biesheuvel
2022-08-14 15:24 ` [PATCH AUTOSEL 5.19 55/64] ARM: 9203/1: kconfig: fix MODULE_PLTS for KASAN with KASAN_VMALLOC Sasha Levin
2 siblings, 1 reply; 5+ messages in thread
From: Sasha Levin @ 2022-08-14 15:24 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Lecopzer Chen, Linus Walleij, Russell King, Sasha Levin, linux,
ryabinin.a.a, matthias.bgg, arnd, ardb, rostedt, nick.hawkins,
john, linux-arm-kernel, kasan-dev, linux-mediatek
From: Lecopzer Chen <lecopzer.chen@mediatek.com>
[ Upstream commit 565cbaad83d83e288927b96565211109bc984007 ]
Simply make shadow of vmalloc area mapped on demand.
Since the virtual address of vmalloc for Arm is also between
MODULE_VADDR and 0x100000000 (ZONE_HIGHMEM), which means the shadow
address has already included between KASAN_SHADOW_START and
KASAN_SHADOW_END.
Thus we need to change nothing for memory map of Arm.
This can fix ARM_MODULE_PLTS with KASan, support KASan for higmem
and support CONFIG_VMAP_STACK with KASan.
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/Kconfig | 1 +
arch/arm/mm/kasan_init.c | 6 +++++-
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7630ba9cb6cc..545d2d4a492b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -75,6 +75,7 @@ config ARM
select HAVE_ARCH_KFENCE if MMU && !XIP_KERNEL
select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL
+ select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN
select HAVE_ARCH_MMAP_RND_BITS if MMU
select HAVE_ARCH_PFN_VALID
select HAVE_ARCH_SECCOMP
diff --git a/arch/arm/mm/kasan_init.c b/arch/arm/mm/kasan_init.c
index 5ad0d6c56d56..29caee9c79ce 100644
--- a/arch/arm/mm/kasan_init.c
+++ b/arch/arm/mm/kasan_init.c
@@ -236,7 +236,11 @@ void __init kasan_init(void)
clear_pgds(KASAN_SHADOW_START, KASAN_SHADOW_END);
- kasan_populate_early_shadow(kasan_mem_to_shadow((void *)VMALLOC_START),
+ if (!IS_ENABLED(CONFIG_KASAN_VMALLOC))
+ kasan_populate_early_shadow(kasan_mem_to_shadow((void *)VMALLOC_START),
+ kasan_mem_to_shadow((void *)VMALLOC_END));
+
+ kasan_populate_early_shadow(kasan_mem_to_shadow((void *)VMALLOC_END),
kasan_mem_to_shadow((void *)-1UL) + 1);
for_each_mem_range(i, &pa_start, &pa_end) {
--
2.35.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH AUTOSEL 5.19 54/64] ARM: 9202/1: kasan: support CONFIG_KASAN_VMALLOC
2022-08-14 15:24 ` [PATCH AUTOSEL 5.19 54/64] ARM: 9202/1: kasan: support CONFIG_KASAN_VMALLOC Sasha Levin
@ 2022-08-16 14:45 ` Ard Biesheuvel
2022-08-20 14:37 ` Sasha Levin
0 siblings, 1 reply; 5+ messages in thread
From: Ard Biesheuvel @ 2022-08-16 14:45 UTC (permalink / raw)
To: Sasha Levin
Cc: linux-kernel, stable, Lecopzer Chen, Linus Walleij, Russell King,
linux, ryabinin.a.a, matthias.bgg, arnd, rostedt, nick.hawkins,
john, linux-arm-kernel, kasan-dev, linux-mediatek
On Sun, 14 Aug 2022 at 17:30, Sasha Levin <sashal@kernel.org> wrote:
>
> From: Lecopzer Chen <lecopzer.chen@mediatek.com>
>
> [ Upstream commit 565cbaad83d83e288927b96565211109bc984007 ]
>
> Simply make shadow of vmalloc area mapped on demand.
>
> Since the virtual address of vmalloc for Arm is also between
> MODULE_VADDR and 0x100000000 (ZONE_HIGHMEM), which means the shadow
> address has already included between KASAN_SHADOW_START and
> KASAN_SHADOW_END.
> Thus we need to change nothing for memory map of Arm.
>
> This can fix ARM_MODULE_PLTS with KASan, support KASan for higmem
> and support CONFIG_VMAP_STACK with KASan.
>
> Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
> Tested-by: Linus Walleij <linus.walleij@linaro.org>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch does not belong in -stable. It has no fixes: or cc:stable
tags, and the contents are completely inappropriate for backporting
anywhere. In general, I think that no patch that touches arch/arm
(with the exception of DTS updates, perhaps) should ever be backported
unless proposed or acked by the maintainer.
I know I shouldn't ask, but how were these patches build/boot tested?
KAsan is very tricky to get right, especially on 32-bit ARM ...
> ---
> arch/arm/Kconfig | 1 +
> arch/arm/mm/kasan_init.c | 6 +++++-
> 2 files changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 7630ba9cb6cc..545d2d4a492b 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -75,6 +75,7 @@ config ARM
> select HAVE_ARCH_KFENCE if MMU && !XIP_KERNEL
> select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
> select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL
> + select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN
> select HAVE_ARCH_MMAP_RND_BITS if MMU
> select HAVE_ARCH_PFN_VALID
> select HAVE_ARCH_SECCOMP
> diff --git a/arch/arm/mm/kasan_init.c b/arch/arm/mm/kasan_init.c
> index 5ad0d6c56d56..29caee9c79ce 100644
> --- a/arch/arm/mm/kasan_init.c
> +++ b/arch/arm/mm/kasan_init.c
> @@ -236,7 +236,11 @@ void __init kasan_init(void)
>
> clear_pgds(KASAN_SHADOW_START, KASAN_SHADOW_END);
>
> - kasan_populate_early_shadow(kasan_mem_to_shadow((void *)VMALLOC_START),
> + if (!IS_ENABLED(CONFIG_KASAN_VMALLOC))
> + kasan_populate_early_shadow(kasan_mem_to_shadow((void *)VMALLOC_START),
> + kasan_mem_to_shadow((void *)VMALLOC_END));
> +
> + kasan_populate_early_shadow(kasan_mem_to_shadow((void *)VMALLOC_END),
> kasan_mem_to_shadow((void *)-1UL) + 1);
>
> for_each_mem_range(i, &pa_start, &pa_end) {
> --
> 2.35.1
>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH AUTOSEL 5.19 54/64] ARM: 9202/1: kasan: support CONFIG_KASAN_VMALLOC
2022-08-16 14:45 ` Ard Biesheuvel
@ 2022-08-20 14:37 ` Sasha Levin
0 siblings, 0 replies; 5+ messages in thread
From: Sasha Levin @ 2022-08-20 14:37 UTC (permalink / raw)
To: Ard Biesheuvel
Cc: linux-kernel, stable, Lecopzer Chen, Linus Walleij, Russell King,
linux, ryabinin.a.a, matthias.bgg, arnd, rostedt, nick.hawkins,
john, linux-arm-kernel, kasan-dev, linux-mediatek
On Tue, Aug 16, 2022 at 04:45:14PM +0200, Ard Biesheuvel wrote:
>On Sun, 14 Aug 2022 at 17:30, Sasha Levin <sashal@kernel.org> wrote:
>>
>> From: Lecopzer Chen <lecopzer.chen@mediatek.com>
>>
>> [ Upstream commit 565cbaad83d83e288927b96565211109bc984007 ]
>>
>> Simply make shadow of vmalloc area mapped on demand.
>>
>> Since the virtual address of vmalloc for Arm is also between
>> MODULE_VADDR and 0x100000000 (ZONE_HIGHMEM), which means the shadow
>> address has already included between KASAN_SHADOW_START and
>> KASAN_SHADOW_END.
>> Thus we need to change nothing for memory map of Arm.
>>
>> This can fix ARM_MODULE_PLTS with KASan, support KASan for higmem
>> and support CONFIG_VMAP_STACK with KASan.
>>
>> Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
>> Tested-by: Linus Walleij <linus.walleij@linaro.org>
>> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>
>This patch does not belong in -stable. It has no fixes: or cc:stable
>tags, and the contents are completely inappropriate for backporting
>anywhere. In general, I think that no patch that touches arch/arm
>(with the exception of DTS updates, perhaps) should ever be backported
>unless proposed or acked by the maintainer.
I'll drop it.
>I know I shouldn't ask, but how were these patches build/boot tested?
>KAsan is very tricky to get right, especially on 32-bit ARM ...
They were only build tested at this stage. They go through
boot/functional test only after they are actually queued up for the
various trees.
--
Thanks,
Sasha
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH AUTOSEL 5.19 55/64] ARM: 9203/1: kconfig: fix MODULE_PLTS for KASAN with KASAN_VMALLOC
[not found] <20220814152437.2374207-1-sashal@kernel.org>
2022-08-14 15:23 ` [PATCH AUTOSEL 5.19 18/64] scsi: ufs: ufs-mediatek: Fix the timing of configuring device regulators Sasha Levin
2022-08-14 15:24 ` [PATCH AUTOSEL 5.19 54/64] ARM: 9202/1: kasan: support CONFIG_KASAN_VMALLOC Sasha Levin
@ 2022-08-14 15:24 ` Sasha Levin
2 siblings, 0 replies; 5+ messages in thread
From: Sasha Levin @ 2022-08-14 15:24 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Lecopzer Chen, Linus Walleij, Russell King, Sasha Levin, linux,
matthias.bgg, arnd, ardb, rostedt, nick.hawkins, john,
linux-arm-kernel, linux-mediatek
From: Lecopzer Chen <lecopzer.chen@mediatek.com>
[ Upstream commit 8fa7ea40bf56945c3ff5af00c0dca1fd9e26f129 ]
When we run out of module space address with ko insertion,
and with MODULE_PLTS, module would turn to try to find memory
from VMALLOC address space.
Unfortunately, with KASAN enabled, VMALLOC doesn't work without
KASAN_VMALLOC, thus select KASAN_VMALLOC by default.
8<--- cut here ---
Unable to handle kernel paging request at virtual address bd300860
[bd300860] *pgd=41cf1811, *pte=41cf26df, *ppte=41cf265f
Internal error: Oops: 80f [#1] PREEMPT SMP ARM
Modules linked in: hello(O+)
CPU: 0 PID: 89 Comm: insmod Tainted: G O 5.16.0-rc6+ #19
Hardware name: Generic DT based system
PC is at mmioset+0x30/0xa8
LR is at 0x0
pc : [<c077ed30>] lr : [<00000000>] psr: 20000013
sp : c451fc18 ip : bd300860 fp : c451fc2c
r10: f18042cc r9 : f18042d0 r8 : 00000000
r7 : 00000001 r6 : 00000003 r5 : 01312d00 r4 : f1804300
r3 : 00000000 r2 : 00262560 r1 : 00000000 r0 : bd300860
Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c5387d Table: 43e9406a DAC: 00000051
Register r0 information: non-paged memory
Register r1 information: NULL pointer
Register r2 information: non-paged memory
Register r3 information: NULL pointer
Register r4 information: 4887-page vmalloc region starting at 0xf1802000 allocated at load_module+0x14f4/0x32a8
Register r5 information: non-paged memory
Register r6 information: non-paged memory
Register r7 information: non-paged memory
Register r8 information: NULL pointer
Register r9 information: 4887-page vmalloc region starting at 0xf1802000 allocated at load_module+0x14f4/0x32a8
Register r10 information: 4887-page vmalloc region starting at 0xf1802000 allocated at load_module+0x14f4/0x32a8
Register r11 information: non-slab/vmalloc memory
Register r12 information: non-paged memory
Process insmod (pid: 89, stack limit = 0xc451c000)
Stack: (0xc451fc18 to 0xc4520000)
fc00: f18041f0 c04803a4
fc20: c451fc44 c451fc30 c048053c c0480358 f1804030 01312cff c451fc64 c451fc48
fc40: c047f330 c0480500 f18040c0 c1b52ccc 00000001 c5be7700 c451fc74 c451fc68
fc60: f1802098 c047f300 c451fcb4 c451fc78 c026106c f180208c c4880004 00000000
fc80: c451fcb4 bf001000 c044ff48 c451fec0 f18040c0 00000000 c1b54cc4 00000000
fca0: c451fdf0 f1804268 c451fe64 c451fcb8 c0264e88 c0260d48 ffff8000 00007fff
fcc0: f18040c0 c025cd00 c451fd14 00000003 0157f008 f1804258 f180425c f1804174
fce0: f1804154 f180424c f18041f0 f180414c f1804178 f18041c0 bf0025d4 188a3fa8
fd00: 0000009e f1804170 f2b18000 c451ff10 c0d92e40 f180416c c451feec 00000001
fd20: 00000000 c451fec8 c451fe20 c451fed0 f18040cc 00000000 f17ea000 c451fdc0
fd40: 41b58ab3 c1387729 c0261c28 c047fb5c c451fe2c c451fd60 c0525308 c048033c
fd60: 188a3fb4 c3ccb090 c451fe00 c3ccb080 00000000 00000000 00016920 00000000
fd80: c02d0388 c047f55c c02d0388 00000000 c451fddc c451fda0 c02d0388 00000000
fda0: 41b58ab3 c13a72d0 c0524ff0 c1705f48 c451fdfc c451fdc0 c02d0388 c047f55c
fdc0: 00016920 00000000 00000003 c1bb2384 c451fdfc c3ccb080 c1bb2384 00000000
fde0: 00000000 00000000 00000000 00000000 c451fe1c c451fe00 c04e9d70 c1705f48
fe00: c1b54cc4 c1bbc71c c3ccb080 00000000 c3ccb080 00000000 00000003 c451fec0
fe20: c451fe64 c451fe30 c0525918 c0524ffc c451feb0 c1705f48 00000000 c1b54cc4
fe40: b78a3fd0 c451ff60 00000000 0157f008 00000003 c451fec0 c451ffa4 c451fe68
fe60: c0265480 c0261c34 c451feb0 7fffffff 00000000 00000002 00000000 c4880000
fe80: 41b58ab3 c138777b c02652cc c04803ec 000a0000 c451ff00 ffffff9c b6ac9f60
fea0: c451fed4 c1705f48 c04a4a90 b78a3fdc f17ea000 ffffff9c b6ac9f60 c0100244
fec0: f17ea21a f17ea300 f17ea000 00016920 f1800240 f18000ac f17fb7dc 01316000
fee0: 013161b0 00002590 01316250 00000000 00000000 00000000 00002580 00000029
ff00: 0000002a 00000013 00000000 0000000c 00000000 00000000 0157f004 c451ffb0
ff20: c1719be0 aed6f410 c451ff74 c451ff38 c0c4103c c0c407d0 c451ff84 c451ff48
ff40: 00000805 c02c8658 c1604230 c1719c30 00000805 0157f004 00000005 c451ffb0
ff60: c1719be0 aed6f410 c451ffac c451ff78 c0122130 c1705f48 c451ffac 0157f008
ff80: 00000006 0000005f 0000017b c0100244 c4880000 0000017b 00000000 c451ffa8
ffa0: c0100060 c02652d8 0157f008 00000006 00000003 0157f008 00000000 b6ac9f60
ffc0: 0157f008 00000006 0000005f 0000017b 00000000 00000000 aed85f74 00000000
ffe0: b6ac9cd8 b6ac9cc8 00030200 aecf2d60 a0000010 00000003 00000000 00000000
Backtrace:
[<c048034c>] (kasan_poison) from [<c048053c>] (kasan_unpoison+0x48/0x5c)
[<c04804f4>] (kasan_unpoison) from [<c047f330>] (__asan_register_globals+0x3c/0x64)
r5:01312cff r4:f1804030
[<c047f2f4>] (__asan_register_globals) from [<f1802098>] (_sub_I_65535_1+0x18/0xf80 [hello])
r7:c5be7700 r6:00000001 r5:c1b52ccc r4:f18040c0
[<f1802080>] (_sub_I_65535_1 [hello]) from [<c026106c>] (do_init_module+0x330/0x72c)
[<c0260d3c>] (do_init_module) from [<c0264e88>] (load_module+0x3260/0x32a8)
r10:f1804268 r9:c451fdf0 r8:00000000 r7:c1b54cc4 r6:00000000 r5:f18040c0
r4:c451fec0
[<c0261c28>] (load_module) from [<c0265480>] (sys_finit_module+0x1b4/0x1e8)
r10:c451fec0 r9:00000003 r8:0157f008 r7:00000000 r6:c451ff60 r5:b78a3fd0
r4:c1b54cc4
[<c02652cc>] (sys_finit_module) from [<c0100060>] (ret_fast_syscall+0x0/0x1c)
Exception stack(0xc451ffa8 to 0xc451fff0)
ffa0: 0157f008 00000006 00000003 0157f008 00000000 b6ac9f60
ffc0: 0157f008 00000006 0000005f 0000017b 00000000 00000000 aed85f74 00000000
ffe0: b6ac9cd8 b6ac9cc8 00030200 aecf2d60
r10:0000017b r9:c4880000 r8:c0100244 r7:0000017b r6:0000005f r5:00000006
r4:0157f008
Code: e92d4100 e1a08001 e1a0e003 e2522040 (a8ac410a)
---[ end trace df6e12843197b6f5 ]---
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 545d2d4a492b..8a4954bc1652 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1415,6 +1415,7 @@ config HW_PERF_EVENTS
config ARM_MODULE_PLTS
bool "Use PLTs to allow module memory to spill over into vmalloc area"
depends on MODULES
+ select KASAN_VMALLOC if KASAN
default y
help
Allocate PLTs when loading modules so that jumps and calls whose
--
2.35.1
^ permalink raw reply related [flat|nested] 5+ messages in thread