* Re: [PATCH v4 2/2] phy: mtk-mipi-csi: add driver for CSI phy
[not found] ` <20230620121928.1231745-3-jstephan@baylibre.com>
@ 2023-07-11 11:20 ` Vinod Koul
0 siblings, 0 replies; only message in thread
From: Vinod Koul @ 2023-07-11 11:20 UTC (permalink / raw)
To: Julien Stephan
Cc: pnguyen, louis.kuo, fsylvestre, Andy Hsieh,
AngeloGioacchino Del Regno, Chunfeng Yun, Chun-Kuang Hu,
Conor Dooley, devicetree, dri-devel, Kishon Vijay Abraham I,
Krzysztof Kozlowski, linux-arm-kernel, linux-kernel,
linux-mediatek, linux-phy, Matthias Brugger, Philipp Zabel,
Rob Herring
On 20-06-23, 14:18, Julien Stephan wrote:
> From: Phi-bang Nguyen <pnguyen@baylibre.com>
>
> This is a new driver that supports the MIPI CSI CD-PHY version 0.5
>
> The number of PHYs depend on the SoC.
> Each PHY can support D-PHY only or CD-PHY configuration.
> The driver supports only D-PHY mode, so CD-PHY
> compatible PHY are configured in D-PHY mode.
>
> Signed-off-by: Louis Kuo <louis.kuo@mediatek.com>
> Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> [Julien Stephan: refactor code]
> [Julien Stephan: simplify driver model: one instance per phy vs one instance
> for all phys]
> Co-developed-by: Julien Stephan <jstephan@baylibre.com>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> ---
> MAINTAINERS | 1 +
> drivers/phy/mediatek/Kconfig | 12 +
> drivers/phy/mediatek/Makefile | 2 +
> .../mediatek/phy-mtk-mipi-csi-0-5-rx-reg.h | 62 ++++
> drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c | 343 ++++++++++++++++++
> 5 files changed, 420 insertions(+)
> create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi-0-5-rx-reg.h
> create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 024d67eb7a94..4d9b6c9f6662 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13189,6 +13189,7 @@ M: Julien Stephan <jstephan@baylibre.com>
> M: Andy Hsieh <andy.hsieh@mediatek.com>
> S: Supported
> F: Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml
> +F: drivers/phy/mediatek/phy-mtk-mipi-csi-0-5*
>
> MEDIATEK MMC/SD/SDIO DRIVER
> M: Chaotian Jing <chaotian.jing@mediatek.com>
> diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
> index 3125ecb5d119..7088382ebc9e 100644
> --- a/drivers/phy/mediatek/Kconfig
> +++ b/drivers/phy/mediatek/Kconfig
> @@ -74,3 +74,15 @@ config PHY_MTK_DP
> select GENERIC_PHY
> help
> Support DisplayPort PHY for MediaTek SoCs.
> +
> +config PHY_MTK_MIPI_CSI_0_5
Keep this sorted alphabetically pls
> + tristate "MediaTek MIPI CSI CD-PHY v0.5 Driver"
> + depends on ARCH_MEDIATEK || COMPILE_TEST
> + depends on OF
> + select GENERIC_PHY
> + help
> + Enable this to support the MIPI CSI CD-PHY receiver version 0.5.
> + The driver supports multiple CSI cdphy ports simultaneously.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called phy-mtk-mipi-csi-0-5.
> diff --git a/drivers/phy/mediatek/Makefile b/drivers/phy/mediatek/Makefile
> index c9a50395533e..63f2fa3ec7e5 100644
> --- a/drivers/phy/mediatek/Makefile
> +++ b/drivers/phy/mediatek/Makefile
> @@ -19,3 +19,5 @@ phy-mtk-mipi-dsi-drv-y := phy-mtk-mipi-dsi.o
> phy-mtk-mipi-dsi-drv-y += phy-mtk-mipi-dsi-mt8173.o
> phy-mtk-mipi-dsi-drv-y += phy-mtk-mipi-dsi-mt8183.o
> obj-$(CONFIG_PHY_MTK_MIPI_DSI) += phy-mtk-mipi-dsi-drv.o
> +
> +obj-$(CONFIG_PHY_MTK_MIPI_CSI_0_5) += phy-mtk-mipi-csi-0-5.o
This one too and no need of empty line
> diff --git a/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5-rx-reg.h b/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5-rx-reg.h
> new file mode 100644
> index 000000000000..97b4c27a1699
> --- /dev/null
> +++ b/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5-rx-reg.h
> @@ -0,0 +1,62 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2023, MediaTek Inc.
> + * Copyright (c) 2023, BayLibre Inc.
> + */
> +
> +#ifndef __PHY_MTK_MIPI_CSI_V_0_5_RX_REG_H__
> +#define __PHY_MTK_MIPI_CSI_V_0_5_RX_REG_H__
> +
> +/*
> + * CSI1 and CSI2 are identical, and similar to CSI0. All CSIX macros are
> + * applicable to the three PHYs. Where differences exist, they are denoted by
> + * macro names using CSI0 and CSI1, the latter being applicable to CSI1 and
> + * CSI2 alike.
> + */
> +
> +#define MIPI_RX_ANA00_CSIXA 0x0000
> +#define RG_CSI0A_CPHY_EN BIT(0)
> +#define RG_CSIXA_EQ_PROTECT_EN BIT(1)
> +#define RG_CSIXA_BG_LPF_EN BIT(2)
> +#define RG_CSIXA_BG_CORE_EN BIT(3)
> +#define RG_CSIXA_DPHY_L0_CKMODE_EN BIT(5)
> +#define RG_CSIXA_DPHY_L0_CKSEL BIT(6)
> +#define RG_CSIXA_DPHY_L1_CKMODE_EN BIT(8)
> +#define RG_CSIXA_DPHY_L1_CKSEL BIT(9)
> +#define RG_CSIXA_DPHY_L2_CKMODE_EN BIT(11)
> +#define RG_CSIXA_DPHY_L2_CKSEL BIT(12)
> +
> +#define MIPI_RX_ANA18_CSIXA 0x0018
> +#define RG_CSI0A_L0_T0AB_EQ_IS GENMASK(5, 4)
> +#define RG_CSI0A_L0_T0AB_EQ_BW GENMASK(7, 6)
> +#define RG_CSI0A_L1_T1AB_EQ_IS GENMASK(21, 20)
> +#define RG_CSI0A_L1_T1AB_EQ_BW GENMASK(23, 22)
> +#define RG_CSI0A_L2_T1BC_EQ_IS GENMASK(21, 20)
> +#define RG_CSI0A_L2_T1BC_EQ_BW GENMASK(23, 22)
> +#define RG_CSI1A_L0_EQ_IS GENMASK(5, 4)
> +#define RG_CSI1A_L0_EQ_BW GENMASK(7, 6)
> +#define RG_CSI1A_L1_EQ_IS GENMASK(21, 20)
> +#define RG_CSI1A_L1_EQ_BW GENMASK(23, 22)
> +#define RG_CSI1A_L2_EQ_IS GENMASK(5, 4)
> +#define RG_CSI1A_L2_EQ_BW GENMASK(7, 6)
> +
> +#define MIPI_RX_ANA1C_CSIXA 0x001c
> +#define MIPI_RX_ANA20_CSI0A 0x0020
> +
> +#define MIPI_RX_ANA24_CSIXA 0x0024
> +#define RG_CSIXA_RESERVE GENMASK(31, 24)
> +
> +#define MIPI_RX_ANA40_CSIXA 0x0040
> +#define RG_CSIXA_CPHY_FMCK_SEL GENMASK(1, 0)
> +#define RG_CSIXA_ASYNC_OPTION GENMASK(7, 4)
> +#define RG_CSIXA_CPHY_SPARE GENMASK(31, 16)
> +
> +#define MIPI_RX_WRAPPER80_CSIXA 0x0080
> +#define CSR_CSI_RST_MODE GENMASK(17, 16)
> +
> +#define MIPI_RX_ANAA8_CSIXA 0x00a8
> +#define RG_CSIXA_CDPHY_L0_T0_BYTECK_INVERT BIT(0)
> +#define RG_CSIXA_DPHY_L1_BYTECK_INVERT BIT(1)
> +#define RG_CSIXA_CDPHY_L2_T1_BYTECK_INVERT BIT(2)
> +
> +#endif
> diff --git a/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c b/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c
> new file mode 100644
> index 000000000000..dbe1d0713fb4
> --- /dev/null
> +++ b/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c
> @@ -0,0 +1,343 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * MediaTek MIPI CSI v0.5 driver
> + *
> + * Copyright (c) 2023, MediaTek Inc.
> + * Copyright (c) 2023, BayLibre Inc.
> + */
> +
> +#include <dt-bindings/phy/phy.h>
> +#include <linux/bitfield.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +#include "phy-mtk-io.h"
> +#include "phy-mtk-mipi-csi-0-5-rx-reg.h"
> +
> +#define CSIXB_OFFSET 0x1000
> +
> +struct mtk_mipi_cdphy_port {
> + struct device *dev;
> + void __iomem *base;
> + struct phy *phy;
> + u32 type;
> + u32 mode;
> + u32 num_lanes;
> +};
> +
> +enum PHY_TYPE {
> + DPHY = 0,
> + CPHY,
> + CDPHY,
> +};
> +
> +static void mtk_phy_csi_cdphy_ana_eq_tune(void __iomem *base)
> +{
> + mtk_phy_update_field(base + MIPI_RX_ANA18_CSIXA,
> + RG_CSI0A_L0_T0AB_EQ_IS, 1);
> + mtk_phy_update_field(base + MIPI_RX_ANA18_CSIXA,
> + RG_CSI0A_L0_T0AB_EQ_BW, 1);
> + mtk_phy_update_field(base + MIPI_RX_ANA1C_CSIXA,
> + RG_CSI0A_L1_T1AB_EQ_IS, 1);
> + mtk_phy_update_field(base + MIPI_RX_ANA1C_CSIXA,
> + RG_CSI0A_L1_T1AB_EQ_BW, 1);
> + mtk_phy_update_field(base + MIPI_RX_ANA20_CSI0A,
> + RG_CSI0A_L2_T1BC_EQ_IS, 1);
> + mtk_phy_update_field(base + MIPI_RX_ANA20_CSI0A,
> + RG_CSI0A_L2_T1BC_EQ_BW, 1);
single line would be better (less than 100)
> +
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA18_CSIXA,
> + RG_CSI0A_L0_T0AB_EQ_IS, 1);
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA18_CSIXA,
> + RG_CSI0A_L0_T0AB_EQ_BW, 1);
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA1C_CSIXA,
> + RG_CSI0A_L1_T1AB_EQ_IS, 1);
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA1C_CSIXA,
> + RG_CSI0A_L1_T1AB_EQ_BW, 1);
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA20_CSI0A,
> + RG_CSI0A_L2_T1BC_EQ_IS, 1);
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA20_CSI0A,
> + RG_CSI0A_L2_T1BC_EQ_BW, 1);
> +}
> +
> +static void mtk_phy_csi_dphy_ana_eq_tune(void __iomem *base)
> +{
> + mtk_phy_update_field(base + MIPI_RX_ANA18_CSIXA,
> + RG_CSI1A_L0_EQ_IS, 1);
> + mtk_phy_update_field(base + MIPI_RX_ANA18_CSIXA,
> + RG_CSI1A_L0_EQ_BW, 1);
> + mtk_phy_update_field(base + MIPI_RX_ANA18_CSIXA,
> + RG_CSI1A_L1_EQ_IS, 1);
> + mtk_phy_update_field(base + MIPI_RX_ANA18_CSIXA,
> + RG_CSI1A_L1_EQ_BW, 1);
> + mtk_phy_update_field(base + MIPI_RX_ANA1C_CSIXA,
> + RG_CSI1A_L2_EQ_IS, 1);
> + mtk_phy_update_field(base + MIPI_RX_ANA1C_CSIXA,
> + RG_CSI1A_L2_EQ_BW, 1);
> +
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA18_CSIXA,
> + RG_CSI1A_L0_EQ_IS, 1);
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA18_CSIXA,
> + RG_CSI1A_L0_EQ_BW, 1);
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA18_CSIXA,
> + RG_CSI1A_L1_EQ_IS, 1);
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA18_CSIXA,
> + RG_CSI1A_L1_EQ_BW, 1);
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA1C_CSIXA,
> + RG_CSI1A_L2_EQ_IS, 1);
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA1C_CSIXA,
> + RG_CSI1A_L2_EQ_BW, 1);
> +}
> +
> +static int mtk_mipi_phy_power_on(struct phy *phy)
> +{
> + struct mtk_mipi_cdphy_port *port = phy_get_drvdata(phy);
> + void __iomem *base = port->base;
> +
> + /*
> + * The driver currently supports DPHY and CD-PHY phys,
> + * but the only mode supported is DPHY,
> + * so CD-PHY capable phys must be configured in DPHY mode
> + */
> + if (port->type == CDPHY) {
> + mtk_phy_update_field(base + MIPI_RX_ANA00_CSIXA,
> + RG_CSI0A_CPHY_EN, 0);
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA00_CSIXA,
> + RG_CSI0A_CPHY_EN, 0);
> + }
> +
> + /*
> + * Lane configuration:
> + *
> + * Only 4 data + 1 clock is supported for now with the following mapping:
> + *
> + * CSIXA_LNR0 --> D2
> + * CSIXA_LNR1 --> D0
> + * CSIXA_LNR2 --> C
> + * CSIXB_LNR0 --> D1
> + * CSIXB_LNR1 --> D3
> + */
> + mtk_phy_update_field(base + MIPI_RX_ANA00_CSIXA,
> + RG_CSIXA_DPHY_L0_CKMODE_EN, 0);
> + mtk_phy_update_field(base + MIPI_RX_ANA00_CSIXA,
> + RG_CSIXA_DPHY_L0_CKSEL, 1);
> + mtk_phy_update_field(base + MIPI_RX_ANA00_CSIXA,
> + RG_CSIXA_DPHY_L1_CKMODE_EN, 0);
> + mtk_phy_update_field(base + MIPI_RX_ANA00_CSIXA,
> + RG_CSIXA_DPHY_L1_CKSEL, 1);
> + mtk_phy_update_field(base + MIPI_RX_ANA00_CSIXA,
> + RG_CSIXA_DPHY_L2_CKMODE_EN, 1);
> + mtk_phy_update_field(base + MIPI_RX_ANA00_CSIXA,
> + RG_CSIXA_DPHY_L2_CKSEL, 1);
> +
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA00_CSIXA,
> + RG_CSIXA_DPHY_L0_CKMODE_EN, 0);
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA00_CSIXA,
> + RG_CSIXA_DPHY_L0_CKSEL, 1);
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA00_CSIXA,
> + RG_CSIXA_DPHY_L1_CKMODE_EN, 0);
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA00_CSIXA,
> + RG_CSIXA_DPHY_L1_CKSEL, 1);
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA00_CSIXA,
> + RG_CSIXA_DPHY_L2_CKMODE_EN, 0);
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA00_CSIXA,
> + RG_CSIXA_DPHY_L2_CKSEL, 1);
> +
> + /* Byte clock invert */
> + mtk_phy_update_field(base + MIPI_RX_ANAA8_CSIXA,
> + RG_CSIXA_CDPHY_L0_T0_BYTECK_INVERT, 1);
> + mtk_phy_update_field(base + MIPI_RX_ANAA8_CSIXA,
> + RG_CSIXA_DPHY_L1_BYTECK_INVERT, 1);
> + mtk_phy_update_field(base + MIPI_RX_ANAA8_CSIXA,
> + RG_CSIXA_CDPHY_L2_T1_BYTECK_INVERT, 1);
> +
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANAA8_CSIXA,
> + RG_CSIXA_CDPHY_L0_T0_BYTECK_INVERT, 1);
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANAA8_CSIXA,
> + RG_CSIXA_DPHY_L1_BYTECK_INVERT, 1);
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANAA8_CSIXA,
> + RG_CSIXA_CDPHY_L2_T1_BYTECK_INVERT, 1);
> +
> + /* Start ANA EQ tuning */
> + if (port->type == CDPHY)
> + mtk_phy_csi_cdphy_ana_eq_tune(base);
> + else
> + mtk_phy_csi_dphy_ana_eq_tune(base);
> +
> + /* End ANA EQ tuning */
> + mtk_phy_set_bits(base + MIPI_RX_ANA40_CSIXA, 0x90);
> +
> + mtk_phy_update_field(base + MIPI_RX_ANA24_CSIXA,
> + RG_CSIXA_RESERVE, 0x40);
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA24_CSIXA,
> + RG_CSIXA_RESERVE, 0x40);
> + mtk_phy_update_field(base + MIPI_RX_WRAPPER80_CSIXA,
> + CSR_CSI_RST_MODE, 0);
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_WRAPPER80_CSIXA,
> + CSR_CSI_RST_MODE, 0);
> + /* ANA power on */
> + mtk_phy_update_field(base + MIPI_RX_ANA00_CSIXA,
> + RG_CSIXA_BG_CORE_EN, 1);
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA00_CSIXA,
> + RG_CSIXA_BG_CORE_EN, 1);
> + usleep_range(20, 40);
> + mtk_phy_update_field(base + MIPI_RX_ANA00_CSIXA,
> + RG_CSIXA_BG_LPF_EN, 1);
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA00_CSIXA,
> + RG_CSIXA_BG_LPF_EN, 1);
> +
> + return 0;
> +}
> +
> +static int mtk_mipi_phy_power_off(struct phy *phy)
> +{
> + struct mtk_mipi_cdphy_port *port = phy_get_drvdata(phy);
> + void __iomem *base = port->base;
> +
> + /* Disable MIPI BG. */
> + mtk_phy_update_field(base + MIPI_RX_ANA00_CSIXA,
> + RG_CSIXA_BG_CORE_EN, 0);
> + mtk_phy_update_field(base + MIPI_RX_ANA00_CSIXA,
> + RG_CSIXA_BG_LPF_EN, 0);
> +
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA00_CSIXA,
> + RG_CSIXA_BG_CORE_EN, 0);
> + mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA00_CSIXA,
> + RG_CSIXA_BG_LPF_EN, 0);
> +
> + return 0;
> +}
> +
> +static struct phy *mtk_mipi_cdphy_xlate(struct device *dev,
> + struct of_phandle_args *args)
> +{
> + struct mtk_mipi_cdphy_port *priv = dev_get_drvdata(dev);
> +
> + /*
> + * If PHY is CD-PHY then we need to get the operating mode
> + * For now only D-PHY mode is supported
D-PHY or CD-PHY??
> + */
> + if (priv->type == CDPHY) {
> + if (args->args_count != 1) {
> + dev_err(dev, "invalid number of arguments\n");
> + return ERR_PTR(-EINVAL);
> + }
> + switch (args->args[0]) {
> + case PHY_TYPE_DPHY:
> + priv->mode = DPHY;
> + if (priv->num_lanes != 4) {
> + dev_err(dev, "Only 4D1C mode is supported for now!\n");
> + return ERR_PTR(-EINVAL);
> + }
> + break;
> + default:
> + dev_err(dev, "Unsupported PHY type: %i\n", args->args[0]);
> + return ERR_PTR(-EINVAL);
> + }
> + } else {
> + if (args->args_count) {
> + dev_err(dev, "invalid number of arguments\n");
> + return ERR_PTR(-EINVAL);
> + }
> + priv->mode = DPHY;
> + }
> +
> + return priv->phy;
> +}
> +
> +static const struct phy_ops mtk_cdphy_ops = {
> + .power_on = mtk_mipi_phy_power_on,
> + .power_off = mtk_mipi_phy_power_off,
> + .owner = THIS_MODULE,
> +};
> +
> +static int mtk_mipi_cdphy_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct phy_provider *phy_provider;
> + struct mtk_mipi_cdphy_port *port;
> + struct phy *phy;
> + int ret;
> + u32 phy_type;
> +
> + port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
> + if (!port)
> + return -ENOMEM;
> +
> + dev_set_drvdata(dev, port);
> +
> + port->dev = dev;
> +
> + port->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(port->base))
> + return PTR_ERR(port->base);
> +
> + ret = of_property_read_u32(dev->of_node, "num-lanes", &port->num_lanes);
> + if (ret) {
> + dev_err(dev, "Failed to read num-lanes property: %i\n", ret);
> + return ret;
> + }
> +
> + /*
> + * phy-type is optional, if not present, PHY is considered to be CD-PHY
> + */
> + if (device_property_present(dev, "phy-type")) {
> + ret = of_property_read_u32(dev->of_node, "phy-type", &phy_type);
> + if (ret) {
> + dev_err(dev, "Failed to read phy-type property: %i\n", ret);
> + return ret;
> + }
> + switch (phy_type) {
> + case PHY_TYPE_DPHY:
> + port->type = DPHY;
> + break;
> + default:
> + dev_err(dev, "Unsupported PHY type: %i\n", phy_type);
> + return -EINVAL;
> + }
> + } else {
> + port->type = CDPHY;
> + }
> +
> + phy = devm_phy_create(dev, NULL, &mtk_cdphy_ops);
> + if (IS_ERR(phy)) {
> + dev_err(dev, "Failed to create PHY: %ld\n", PTR_ERR(phy));
> + return PTR_ERR(phy);
> + }
> +
> + port->phy = phy;
> + phy_set_drvdata(phy, port);
> +
> + phy_provider = devm_of_phy_provider_register(dev, mtk_mipi_cdphy_xlate);
> + if (IS_ERR(phy_provider)) {
> + dev_err(dev, "Failed to register PHY provider: %ld\n",
> + PTR_ERR(phy_provider));
> + return PTR_ERR(phy_provider);
> + }
> +
> + return 0;
> +}
> +
> +static const struct of_device_id mtk_mipi_cdphy_of_match[] = {
> + { .compatible = "mediatek,mt8365-csi-rx" },
> + { /* sentinel */},
> +};
> +MODULE_DEVICE_TABLE(of, mtk_mipi_cdphy_of_match);
> +
> +static struct platform_driver mipi_cdphy_pdrv = {
> + .probe = mtk_mipi_cdphy_probe,
> + .driver = {
> + .name = "mtk-mipi-csi-0-5",
> + .of_match_table = mtk_mipi_cdphy_of_match,
> + },
> +};
> +module_platform_driver(mipi_cdphy_pdrv);
> +
> +MODULE_DESCRIPTION("MediaTek MIPI CSI CD-PHY v0.5 Driver");
> +MODULE_AUTHOR("Louis Kuo <louis.kuo@mediatek.com>");
> +MODULE_LICENSE("GPL");
> --
> 2.41.0
--
~Vinod
^ permalink raw reply [flat|nested] only message in thread