* [PATCH 1/2] mt76: mt7615: enable support for mesh
@ 2019-05-31 8:15 Ryder Lee
2019-05-31 8:15 ` [PATCH 2/2] mt76: mt7615: fix slow performance when enable encryption Ryder Lee
2019-05-31 10:02 ` [PATCH 1/2] mt76: mt7615: enable support for mesh Lorenzo Bianconi
0 siblings, 2 replies; 4+ messages in thread
From: Ryder Lee @ 2019-05-31 8:15 UTC (permalink / raw)
To: Felix Fietkau, Lorenzo Bianconi
Cc: Roy Luo, YF Luo, Yiwei Chung, Sean Wang, Chih-Min Chen,
linux-wireless, linux-mediatek, linux-kernel, Ryder Lee
Enable NL80211_IFTYPE_MESH_POINT and add its path.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
drivers/net/wireless/mediatek/mt76/mt7615/init.c | 6 ++++++
drivers/net/wireless/mediatek/mt76/mt7615/main.c | 1 +
drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 5 ++++-
3 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
index 59f604f3161f..f860af6a42da 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
@@ -133,6 +133,9 @@ static const struct ieee80211_iface_limit if_limits[] = {
{
.max = MT7615_MAX_INTERFACES,
.types = BIT(NL80211_IFTYPE_AP) |
+#ifdef CONFIG_MAC80211_MESH
+ BIT(NL80211_IFTYPE_MESH_POINT) |
+#endif
BIT(NL80211_IFTYPE_STATION)
}
};
@@ -195,6 +198,9 @@ int mt7615_register_device(struct mt7615_dev *dev)
dev->mt76.antenna_mask = 0xf;
wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+#ifdef CONFIG_MAC80211_MESH
+ BIT(NL80211_IFTYPE_MESH_POINT) |
+#endif
BIT(NL80211_IFTYPE_AP);
ret = mt76_register_device(&dev->mt76, true, mt7615_rates,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
index b0bb7cc12385..585e67fa2728 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
@@ -37,6 +37,7 @@ static int get_omac_idx(enum nl80211_iftype type, u32 mask)
switch (type) {
case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_MESH_POINT:
/* ap use hw bssid 0 and ext bssid */
if (~mask & BIT(HW_BSSID_0))
return HW_BSSID_0;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
index 43f70195244c..8b8db526cb16 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
@@ -754,6 +754,7 @@ int mt7615_mcu_set_bss_info(struct mt7615_dev *dev,
switch (vif->type) {
case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_MESH_POINT:
tx_wlan_idx = mvif->sta.wcid.idx;
conn_type = CONNECTION_INFRA_AP;
break;
@@ -968,7 +969,8 @@ int mt7615_mcu_add_wtbl(struct mt7615_dev *dev, struct ieee80211_vif *vif,
.rx_wtbl = {
.tag = cpu_to_le16(WTBL_RX),
.len = cpu_to_le16(sizeof(struct wtbl_rx)),
- .rca1 = vif->type != NL80211_IFTYPE_AP,
+ .rca1 = vif->type != (NL80211_IFTYPE_AP ||
+ NL80211_IFTYPE_MESH_POINT),
.rca2 = 1,
.rv = 1,
},
@@ -1042,6 +1044,7 @@ static void sta_rec_convert_vif_type(enum nl80211_iftype type, u32 *conn_type)
{
switch (type) {
case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_MESH_POINT:
if (conn_type)
*conn_type = CONNECTION_INFRA_STA;
break;
--
2.18.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 2/2] mt76: mt7615: fix slow performance when enable encryption
2019-05-31 8:15 [PATCH 1/2] mt76: mt7615: enable support for mesh Ryder Lee
@ 2019-05-31 8:15 ` Ryder Lee
2019-05-31 10:02 ` [PATCH 1/2] mt76: mt7615: enable support for mesh Lorenzo Bianconi
1 sibling, 0 replies; 4+ messages in thread
From: Ryder Lee @ 2019-05-31 8:15 UTC (permalink / raw)
To: Felix Fietkau, Lorenzo Bianconi
Cc: Roy Luo, YF Luo, Yiwei Chung, Sean Wang, Chih-Min Chen,
linux-wireless, linux-mediatek, linux-kernel, Ryder Lee
Fix wrong WCID assignment and add RKV (RX Key of this entry is valid)
flag to check if peer uses the same configuration with previous
handshaking.
If the configuration is mismatch, WTBL indicates a “cipher mismatch”
to stop SEC decryption to prevent the packet from damage.
Suggested-by: YF Luo <yf.luo@mediatek.com>
Suggested-by: Yiwei Chung <yiwei.chung@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
drivers/net/wireless/mediatek/mt76/mt7615/init.c | 15 +++++++++------
drivers/net/wireless/mediatek/mt76/mt7615/main.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 1 +
3 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
index f860af6a42da..b96c753b7532 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
@@ -62,16 +62,11 @@ static void mt7615_mac_init(struct mt7615_dev *dev)
MT_AGG_ARCR_RATE_DOWN_RATIO_EN |
FIELD_PREP(MT_AGG_ARCR_RATE_DOWN_RATIO, 1) |
FIELD_PREP(MT_AGG_ARCR_RATE_UP_EXTRA_TH, 4)));
-
- dev->mt76.global_wcid.idx = MT7615_WTBL_RESERVED;
- dev->mt76.global_wcid.hw_key_idx = -1;
- rcu_assign_pointer(dev->mt76.wcid[MT7615_WTBL_RESERVED],
- &dev->mt76.global_wcid);
}
static int mt7615_init_hardware(struct mt7615_dev *dev)
{
- int ret;
+ int ret, idx;
mt76_wr(dev, MT_INT_SOURCE_CSR, ~0);
@@ -98,6 +93,14 @@ static int mt7615_init_hardware(struct mt7615_dev *dev)
mt7615_mcu_ctrl_pm_state(dev, 0);
mt7615_mcu_del_wtbl_all(dev);
+ /* Beacon and mgmt frames should occupy wcid 0 */
+ idx = mt76_wcid_alloc(dev->mt76.wcid_mask, MT7615_WTBL_STA - 1);
+ if (idx)
+ return -ENOSPC;
+
+ dev->mt76.global_wcid.idx = idx;
+ dev->mt76.global_wcid.hw_key_idx = -1;
+ rcu_assign_pointer(dev->mt76.wcid[idx], &dev->mt76.global_wcid);
return 0;
}
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
index 585e67fa2728..2cdd339453c8 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
@@ -95,7 +95,7 @@ static int mt7615_add_interface(struct ieee80211_hw *hw,
dev->vif_mask |= BIT(mvif->idx);
dev->omac_mask |= BIT(mvif->omac_idx);
- idx = MT7615_WTBL_RESERVED - 1 - mvif->idx;
+ idx = MT7615_WTBL_RESERVED - mvif->idx;
mvif->sta.wcid.idx = idx;
mvif->sta.wcid.hw_key_idx = -1;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
index 8b8db526cb16..5f38741e7366 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
@@ -882,6 +882,7 @@ int mt7615_mcu_set_wtbl_key(struct mt7615_dev *dev, int wcid,
if (cipher == MT_CIPHER_NONE && key)
return -EOPNOTSUPP;
+ req.key.rkv = 1;
req.key.cipher_id = cipher;
req.key.key_id = key->keyidx;
req.key.key_len = key->keylen;
--
2.18.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH 1/2] mt76: mt7615: enable support for mesh
2019-05-31 8:15 [PATCH 1/2] mt76: mt7615: enable support for mesh Ryder Lee
2019-05-31 8:15 ` [PATCH 2/2] mt76: mt7615: fix slow performance when enable encryption Ryder Lee
@ 2019-05-31 10:02 ` Lorenzo Bianconi
2019-05-31 10:31 ` Ryder Lee
1 sibling, 1 reply; 4+ messages in thread
From: Lorenzo Bianconi @ 2019-05-31 10:02 UTC (permalink / raw)
To: Ryder Lee
Cc: Felix Fietkau, Lorenzo Bianconi, Roy Luo, YF Luo, Yiwei Chung,
Sean Wang, Chih-Min Chen, linux-wireless, linux-mediatek,
linux-kernel
[-- Attachment #1: Type: text/plain, Size: 2274 bytes --]
> Enable NL80211_IFTYPE_MESH_POINT and add its path.
>
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
> ---
> drivers/net/wireless/mediatek/mt76/mt7615/init.c | 6 ++++++
> drivers/net/wireless/mediatek/mt76/mt7615/main.c | 1 +
> drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 5 ++++-
> 3 files changed, 11 insertions(+), 1 deletion(-)
>
[...]
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
> index b0bb7cc12385..585e67fa2728 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
> @@ -37,6 +37,7 @@ static int get_omac_idx(enum nl80211_iftype type, u32 mask)
>
> switch (type) {
> case NL80211_IFTYPE_AP:
> + case NL80211_IFTYPE_MESH_POINT:
> /* ap use hw bssid 0 and ext bssid */
> if (~mask & BIT(HW_BSSID_0))
> return HW_BSSID_0;
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
> index 43f70195244c..8b8db526cb16 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
> @@ -754,6 +754,7 @@ int mt7615_mcu_set_bss_info(struct mt7615_dev *dev,
>
> switch (vif->type) {
> case NL80211_IFTYPE_AP:
> + case NL80211_IFTYPE_MESH_POINT:
> tx_wlan_idx = mvif->sta.wcid.idx;
> conn_type = CONNECTION_INFRA_AP;
Just out of curiosity, why not using CONNECTION_MESH_{AP,STA} here?
why not NETWORK_MESH?
> break;
> @@ -968,7 +969,8 @@ int mt7615_mcu_add_wtbl(struct mt7615_dev *dev, struct ieee80211_vif *vif,
> .rx_wtbl = {
> .tag = cpu_to_le16(WTBL_RX),
> .len = cpu_to_le16(sizeof(struct wtbl_rx)),
> - .rca1 = vif->type != NL80211_IFTYPE_AP,
> + .rca1 = vif->type != (NL80211_IFTYPE_AP ||
> + NL80211_IFTYPE_MESH_POINT),
> .rca2 = 1,
> .rv = 1,
> },
> @@ -1042,6 +1044,7 @@ static void sta_rec_convert_vif_type(enum nl80211_iftype type, u32 *conn_type)
> {
> switch (type) {
> case NL80211_IFTYPE_AP:
> + case NL80211_IFTYPE_MESH_POINT:
> if (conn_type)
> *conn_type = CONNECTION_INFRA_STA;
> break;
same here.
Regards,
Lorenzo
> --
> 2.18.0
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH 1/2] mt76: mt7615: enable support for mesh
2019-05-31 10:02 ` [PATCH 1/2] mt76: mt7615: enable support for mesh Lorenzo Bianconi
@ 2019-05-31 10:31 ` Ryder Lee
0 siblings, 0 replies; 4+ messages in thread
From: Ryder Lee @ 2019-05-31 10:31 UTC (permalink / raw)
To: Lorenzo Bianconi
Cc: Felix Fietkau, Lorenzo Bianconi, Roy Luo, YF Luo, Yiwei Chung,
Sean Wang, Chih-Min Chen, linux-wireless, linux-mediatek,
linux-kernel
On Fri, 2019-05-31 at 12:02 +0200, Lorenzo Bianconi wrote:
> > Enable NL80211_IFTYPE_MESH_POINT and add its path.
> >
> > Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
> > ---
> > drivers/net/wireless/mediatek/mt76/mt7615/init.c | 6 ++++++
> > drivers/net/wireless/mediatek/mt76/mt7615/main.c | 1 +
> > drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 5 ++++-
> > 3 files changed, 11 insertions(+), 1 deletion(-)
> >
>
> [...]
>
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
> > index b0bb7cc12385..585e67fa2728 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
> > @@ -37,6 +37,7 @@ static int get_omac_idx(enum nl80211_iftype type, u32 mask)
> >
> > switch (type) {
> > case NL80211_IFTYPE_AP:
> > + case NL80211_IFTYPE_MESH_POINT:
> > /* ap use hw bssid 0 and ext bssid */
> > if (~mask & BIT(HW_BSSID_0))
> > return HW_BSSID_0;
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
> > index 43f70195244c..8b8db526cb16 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
> > @@ -754,6 +754,7 @@ int mt7615_mcu_set_bss_info(struct mt7615_dev *dev,
> >
> > switch (vif->type) {
> > case NL80211_IFTYPE_AP:
> > + case NL80211_IFTYPE_MESH_POINT:
> > tx_wlan_idx = mvif->sta.wcid.idx;
> > conn_type = CONNECTION_INFRA_AP;
>
> Just out of curiosity, why not using CONNECTION_MESH_{AP,STA} here?
> why not NETWORK_MESH?
Actually the CONNECTION_MESH_{AP,STA} are useless and I will send v2 to
remove them.
> > break;
> > @@ -968,7 +969,8 @@ int mt7615_mcu_add_wtbl(struct mt7615_dev *dev, struct ieee80211_vif *vif,
> > .rx_wtbl = {
> > .tag = cpu_to_le16(WTBL_RX),
> > .len = cpu_to_le16(sizeof(struct wtbl_rx)),
> > - .rca1 = vif->type != NL80211_IFTYPE_AP,
> > + .rca1 = vif->type != (NL80211_IFTYPE_AP ||
> > + NL80211_IFTYPE_MESH_POINT),
> > .rca2 = 1,
> > .rv = 1,
> > },
> > @@ -1042,6 +1044,7 @@ static void sta_rec_convert_vif_type(enum nl80211_iftype type, u32 *conn_type)
> > {
> > switch (type) {
> > case NL80211_IFTYPE_AP:
> > + case NL80211_IFTYPE_MESH_POINT:
> > if (conn_type)
> > *conn_type = CONNECTION_INFRA_STA;
> > break;
>
> same here.
>
> Regards,
> Lorenzo
>
> > --
> > 2.18.0
> >
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-05-31 10:31 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-05-31 8:15 [PATCH 1/2] mt76: mt7615: enable support for mesh Ryder Lee
2019-05-31 8:15 ` [PATCH 2/2] mt76: mt7615: fix slow performance when enable encryption Ryder Lee
2019-05-31 10:02 ` [PATCH 1/2] mt76: mt7615: enable support for mesh Lorenzo Bianconi
2019-05-31 10:31 ` Ryder Lee
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox