* Re: File corruption
[not found] ` <19990622152145.A1059@uni-koblenz.de>
@ 1999-06-22 23:49 ` Ulf Carlsson
1999-06-24 22:28 ` Ralf Baechle
0 siblings, 1 reply; 11+ messages in thread
From: Ulf Carlsson @ 1999-06-22 23:49 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux
On Tue, Jun 22, 1999 at 03:21:45PM +0200, Ralf Baechle wrote:
> On Tue, Jun 22, 1999 at 03:29:00AM +0200, Ulf Carlsson wrote:
>
> > This is *really* annoying, I can't do anything without getting interrupted
> > by some bug on the Indy. I can't stand this file corruption. I just lost
> > an entire directory. This isn't because of crashes, stuff just vanish, or
> > gets corrupted without any reason. I for example had a gzipped patch, I
> > decompressed it and I got a lot of junk in the middle of the file.
>
> Question, is this effect repeatable, that is if you decompress the file a
> second time, will you still see the filesystem corruption? The latter would
> mean that the data decompressed data get corrupted on the fly and the SCSI
> driver isn't involved. Or does the gzip'ed file itself already contain the
> corrupted data?
Since the file is decompressed without warnings I assume that the scp went fine.
Anyhow, when I had decompressed the file I got corruption in the middle of the
patch. The corruption affected only a couple of lines, 10 or so.
The problems I experience are not repeatable. Everything went smooth after a
reboot. I usually reboot the machine when it's messing with me, that helps. At
least for a while.
> And under which kernel version did this start to happen?
2.2.1 I think.
> Could you resend me your hinv output?
Unfortunately I don't have IRIX. However, I have a 133 MHz R4600 CPU with 512 k
board cache. I have two 1 Gb SCSI driver connected.
> > Earlier today the cached version of /lib/libpam_misc.so.0.64 was corrupted
> > or something, and corrupted ELF headers were reported. A reboot fixed that
> > one.
>
> It seems that you observe similar problems like me. For me however the
> problem has just vanished and was rare anyway.
They're rare for me as well, but I've had a couple in just a few days now.
Maybe the file corruption became heavier since 2.3.6?
> I understand that very well. Btw, I started to store important stuff on NFS.
I can't stand NFS. Files, or entire directories vanish from ls, but I may still
open them if I specify their names directly. I think I've been talking to you
about this before.
- Ulf
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: File corruption
1999-06-22 23:49 ` File corruption Ulf Carlsson
@ 1999-06-24 22:28 ` Ralf Baechle
1999-06-25 13:31 ` Ulf Carlsson
1999-06-25 14:34 ` Andrew Linfoot
0 siblings, 2 replies; 11+ messages in thread
From: Ralf Baechle @ 1999-06-24 22:28 UTC (permalink / raw)
To: linux
On Wed, Jun 23, 1999 at 01:49:23AM +0200, Ulf Carlsson wrote:
> > And under which kernel version did this start to happen?
>
> 2.2.1 I think.
Are you shure? The problem Alan is tracking started to hit from 2.2.7 on.
If 2.2.1 already starts making these kind of troubles then we probably
track two different problems.
> Unfortunately I don't have IRIX. However, I have a 133 MHz R4600 CPU with 512 k
> board cache. I have two 1 Gb SCSI driver connected.
Is this a low-mem configuration? The problem Alan is tracking apparently
seems to hit low mem systems more often.
Ralf
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: File corruption
1999-06-24 22:28 ` Ralf Baechle
@ 1999-06-25 13:31 ` Ulf Carlsson
1999-06-25 18:08 ` Thomas Bogendoerfer
1999-06-25 14:34 ` Andrew Linfoot
1 sibling, 1 reply; 11+ messages in thread
From: Ulf Carlsson @ 1999-06-25 13:31 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux
> > > And under which kernel version did this start to happen?
> >
> > 2.2.1 I think.
>
> Are you shure? The problem Alan is tracking started to hit from 2.2.7 on. If
> 2.2.1 already starts making these kind of troubles then we probably track two
> different problems.
Probably. I have a new problem with the 2.3.8 kernel now as well: Page->owner
becomes -1 at line 1218 in buffer.c, thus forcing an oops. This happens when I
try to cat a couple of big files into a new file. This is even reproduceable...
I get some error messages before the oops as well:
attempt to access beyond end of device
08:01: rw=0, want=122156967, limit=929559
attempt to access beyond end of device
08:01: rw=0, want=886680107, limit=929559
> > Unfortunately I don't have IRIX. However, I have a 133 MHz R4600 CPU with
> > 512 k board cache. I have two 1 Gb SCSI driver connected.
>
> Is this a low-mem configuration? The problem Alan is tracking apparently
> seems to hit low mem systems more often.
Not really, I have 128 Mb RAM, but no swap.
Regards,
Ulf
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: File corruption
1999-06-24 22:28 ` Ralf Baechle
1999-06-25 13:31 ` Ulf Carlsson
@ 1999-06-25 14:34 ` Andrew Linfoot
1999-06-25 14:34 ` Andrew Linfoot
` (2 more replies)
1 sibling, 3 replies; 11+ messages in thread
From: Andrew Linfoot @ 1999-06-25 14:34 UTC (permalink / raw)
To: linux
I have been running 2.2.1 on my indy for about 3 weeks now and have
encountered problems like this,
in fact i am surprised at how stable the box is, i have been doing some
quite large builds of qt, kde and the like too. If this is reproducible then
i would be prepared to experiment on one of my boxes.
The only gripe i have is that the scsi driver breaks when i attach external
devices, any ideas?
Andy
----- Original Message -----
From: Ralf Baechle <ralf@uni-koblenz.de>
To: <linux@cthulhu.engr.sgi.com>
Sent: Thursday, June 24, 1999 11:28 PM
Subject: Re: File corruption
> On Wed, Jun 23, 1999 at 01:49:23AM +0200, Ulf Carlsson wrote:
>
> > > And under which kernel version did this start to happen?
> >
> > 2.2.1 I think.
>
> Are you shure? The problem Alan is tracking started to hit from 2.2.7 on.
> If 2.2.1 already starts making these kind of troubles then we probably
> track two different problems.
>
> > Unfortunately I don't have IRIX. However, I have a 133 MHz R4600 CPU
with 512 k
> > board cache. I have two 1 Gb SCSI driver connected.
>
> Is this a low-mem configuration? The problem Alan is tracking apparently
> seems to hit low mem systems more often.
>
> Ralf
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: File corruption
1999-06-25 14:34 ` Andrew Linfoot
@ 1999-06-25 14:34 ` Andrew Linfoot
1999-06-25 16:59 ` Ulf Carlsson
1999-06-28 9:34 ` Ralf Baechle
2 siblings, 0 replies; 11+ messages in thread
From: Andrew Linfoot @ 1999-06-25 14:34 UTC (permalink / raw)
To: linux
I have been running 2.2.1 on my indy for about 3 weeks now and have
encountered problems like this,
in fact i am surprised at how stable the box is, i have been doing some
quite large builds of qt, kde and the like too. If this is reproducible then
i would be prepared to experiment on one of my boxes.
The only gripe i have is that the scsi driver breaks when i attach external
devices, any ideas?
Andy
----- Original Message -----
From: Ralf Baechle <ralf@uni-koblenz.de>
To: <linux@cthulhu.engr.sgi.com>
Sent: Thursday, June 24, 1999 11:28 PM
Subject: Re: File corruption
> On Wed, Jun 23, 1999 at 01:49:23AM +0200, Ulf Carlsson wrote:
>
> > > And under which kernel version did this start to happen?
> >
> > 2.2.1 I think.
>
> Are you shure? The problem Alan is tracking started to hit from 2.2.7 on.
> If 2.2.1 already starts making these kind of troubles then we probably
> track two different problems.
>
> > Unfortunately I don't have IRIX. However, I have a 133 MHz R4600 CPU
with 512 k
> > board cache. I have two 1 Gb SCSI driver connected.
>
> Is this a low-mem configuration? The problem Alan is tracking apparently
> seems to hit low mem systems more often.
>
> Ralf
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: File corruption
1999-06-25 14:34 ` Andrew Linfoot
1999-06-25 14:34 ` Andrew Linfoot
@ 1999-06-25 16:59 ` Ulf Carlsson
1999-06-25 17:11 ` Andrew Linfoot
1999-06-28 9:34 ` Ralf Baechle
2 siblings, 1 reply; 11+ messages in thread
From: Ulf Carlsson @ 1999-06-25 16:59 UTC (permalink / raw)
To: Andrew Linfoot; +Cc: linux
On Fri, Jun 25, 1999 at 03:34:15PM +0100, Andrew Linfoot wrote:
> I have been running 2.2.1 on my indy for about 3 weeks now and have
> encountered problems like this, in fact i am surprised at how stable the box
> is, i have been doing some quite large builds of qt, kde and the like too. If
> this is reproducible then i would be prepared to experiment on one of my
> boxes.
It doesn't crash, only file corruption..
> The only gripe i have is that the scsi driver breaks when i attach external
> devices, any ideas?
I have file corruption without any external devices. It looks like the problems
appear when more than one SCSI devices are present. You only have one internal
SCSI drive, right?
Do you mind telling us more exactly what type of file corruption you suffer
from? It would also help if you could attach an output from hinv, or just tell
us what hardware you have.
Regards,
Ulf
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: File corruption
1999-06-25 16:59 ` Ulf Carlsson
@ 1999-06-25 17:11 ` Andrew Linfoot
1999-06-25 17:11 ` Andrew Linfoot
1999-06-28 10:39 ` Ralf Baechle
0 siblings, 2 replies; 11+ messages in thread
From: Andrew Linfoot @ 1999-06-25 17:11 UTC (permalink / raw)
To: Ulf Carlsson; +Cc: linux
On a couple of occasions i have lost entire directories but this was some
time ago
----- Original Message -----
From: Ulf Carlsson <ulfc@thepuffingroup.com>
To: Andrew Linfoot <andy@derfel99.freeserve.co.uk>
Cc: <linux@cthulhu.engr.sgi.com>
Sent: Friday, June 25, 1999 5:59 PM
Subject: Re: File corruption
> On Fri, Jun 25, 1999 at 03:34:15PM +0100, Andrew Linfoot wrote:
> > I have been running 2.2.1 on my indy for about 3 weeks now and have
> > encountered problems like this, in fact i am surprised at how stable the
box
> > is, i have been doing some quite large builds of qt, kde and the like
too. If
> > this is reproducible then i would be prepared to experiment on one of my
> > boxes.
I have had a couple of instances where i lost complete directories, but this
was during the first few days of running Linux on my box, i simply put it
down to operator error!
>
> It doesn't crash, only file corruption..
>
> > The only gripe i have is that the scsi driver breaks when i attach
external
> > devices, any ideas?
>
> I have file corruption without any external devices. It looks like the
problems
> appear when more than one SCSI devices are present. You only have one
internal
> SCSI drive, right?
2 drives - see below
If i attempt to attach an external device the system just hangs during scsi
initialisation. I think this is fixed in later kernels but i don't have cvs
up yet so i can't move past 2.2.1.
>
> Do you mind telling us more exactly what type of file corruption you
suffer
> from? It would also help if you could attach an output from hinv, or just
tell
> us what hardware you have.
CPU: MIPS-R4400 FPU<MIPS-R4400FPC> ICACHE DCACHE SCACHE
Loading R4000 MMU routines.
CPU revision is: 00000450
Primary instruction cache 16kb, linesize 16 bytes)
Primary data cache 16kb, linesize 16 bytes)
Secondary cache sized at 1024K linesize 128
8-bit graphics
128MB RAM
sda 540MB with base IRIX
sdb 2GB with Linux.and swap
an interesting point here is that /proc/cpuinfo tells me i only have an
r4000!
Andy
>
> Regards,
> Ulf
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: File corruption
1999-06-25 17:11 ` Andrew Linfoot
@ 1999-06-25 17:11 ` Andrew Linfoot
1999-06-28 10:39 ` Ralf Baechle
1 sibling, 0 replies; 11+ messages in thread
From: Andrew Linfoot @ 1999-06-25 17:11 UTC (permalink / raw)
To: Ulf Carlsson; +Cc: linux
On a couple of occasions i have lost entire directories but this was some
time ago
----- Original Message -----
From: Ulf Carlsson <ulfc@thepuffingroup.com>
To: Andrew Linfoot <andy@derfel99.freeserve.co.uk>
Cc: <linux@cthulhu.engr.sgi.com>
Sent: Friday, June 25, 1999 5:59 PM
Subject: Re: File corruption
> On Fri, Jun 25, 1999 at 03:34:15PM +0100, Andrew Linfoot wrote:
> > I have been running 2.2.1 on my indy for about 3 weeks now and have
> > encountered problems like this, in fact i am surprised at how stable the
box
> > is, i have been doing some quite large builds of qt, kde and the like
too. If
> > this is reproducible then i would be prepared to experiment on one of my
> > boxes.
I have had a couple of instances where i lost complete directories, but this
was during the first few days of running Linux on my box, i simply put it
down to operator error!
>
> It doesn't crash, only file corruption..
>
> > The only gripe i have is that the scsi driver breaks when i attach
external
> > devices, any ideas?
>
> I have file corruption without any external devices. It looks like the
problems
> appear when more than one SCSI devices are present. You only have one
internal
> SCSI drive, right?
2 drives - see below
If i attempt to attach an external device the system just hangs during scsi
initialisation. I think this is fixed in later kernels but i don't have cvs
up yet so i can't move past 2.2.1.
>
> Do you mind telling us more exactly what type of file corruption you
suffer
> from? It would also help if you could attach an output from hinv, or just
tell
> us what hardware you have.
CPU: MIPS-R4400 FPU<MIPS-R4400FPC> ICACHE DCACHE SCACHE
Loading R4000 MMU routines.
CPU revision is: 00000450
Primary instruction cache 16kb, linesize 16 bytes)
Primary data cache 16kb, linesize 16 bytes)
Secondary cache sized at 1024K linesize 128
8-bit graphics
128MB RAM
sda 540MB with base IRIX
sdb 2GB with Linux.and swap
an interesting point here is that /proc/cpuinfo tells me i only have an
r4000!
Andy
>
> Regards,
> Ulf
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: File corruption
1999-06-25 13:31 ` Ulf Carlsson
@ 1999-06-25 18:08 ` Thomas Bogendoerfer
0 siblings, 0 replies; 11+ messages in thread
From: Thomas Bogendoerfer @ 1999-06-25 18:08 UTC (permalink / raw)
To: Ralf Baechle, linux
On Fri, Jun 25, 1999 at 03:31:08PM +0200, Ulf Carlsson wrote:
> Probably. I have a new problem with the 2.3.8 kernel now as well: Page->owner
[...]
> I get some error messages before the oops as well:
>
> attempt to access beyond end of device
> 08:01: rw=0, want=122156967, limit=929559
> attempt to access beyond end of device
> 08:01: rw=0, want=886680107, limit=929559
this seems to be a normal 2.3 error. At least I get this impression, when
reading the linux-kernel mailinglist.
Thomas.
--
This device has completely bogus header. Compaq scores again :-|
It's a host bridge, but it should be called ghost bridge instead ;^)
[Martin `MJ' Mares on linux-kernel]
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: File corruption
1999-06-25 14:34 ` Andrew Linfoot
1999-06-25 14:34 ` Andrew Linfoot
1999-06-25 16:59 ` Ulf Carlsson
@ 1999-06-28 9:34 ` Ralf Baechle
2 siblings, 0 replies; 11+ messages in thread
From: Ralf Baechle @ 1999-06-28 9:34 UTC (permalink / raw)
To: Andrew Linfoot; +Cc: linux
On Fri, Jun 25, 1999 at 03:34:15PM +0100, Andrew Linfoot wrote:
> I have been running 2.2.1 on my indy for about 3 weeks now and have
> encountered problems like this,
> in fact i am surprised at how stable the box is, i have been doing some
> quite large builds of qt, kde and the like too. If this is reproducible then
> i would be prepared to experiment on one of my boxes.
>
> The only gripe i have is that the scsi driver breaks when i attach external
> devices, any ideas?
There is nothings special with external devices, so if they result in
crashes you should double check that cabeling and termination are ok.
Ralf
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: File corruption
1999-06-25 17:11 ` Andrew Linfoot
1999-06-25 17:11 ` Andrew Linfoot
@ 1999-06-28 10:39 ` Ralf Baechle
1 sibling, 0 replies; 11+ messages in thread
From: Ralf Baechle @ 1999-06-28 10:39 UTC (permalink / raw)
To: Andrew Linfoot; +Cc: Ulf Carlsson, linux, linux-mips, linux-mips
On Fri, Jun 25, 1999 at 06:11:52PM +0100, Andrew Linfoot wrote:
> CPU: MIPS-R4400 FPU<MIPS-R4400FPC> ICACHE DCACHE SCACHE
This is what the firmware detected.
> Loading R4000 MMU routines.
This will always say R4000 if it's a R4000 class CPU.
> CPU revision is: 00000450
> Primary instruction cache 16kb, linesize 16 bytes)
> Primary data cache 16kb, linesize 16 bytes)
> Secondary cache sized at 1024K linesize 128
Which says that you have an R4400SC V5.0.
> an interesting point here is that /proc/cpuinfo tells me i only have an
> r4000!
Good spotting, the CPU detection code has a bug causes only V4 CPUs to be
detected as R4400. The difference is just cosmetics; R4000 and R4400 are
almost the same. Especially it's unrelated to the file corruption problem.
Ralf
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~1999-06-28 21:48 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <19990622032859.B6955@thepuffingroup.com>
[not found] ` <19990622152145.A1059@uni-koblenz.de>
1999-06-22 23:49 ` File corruption Ulf Carlsson
1999-06-24 22:28 ` Ralf Baechle
1999-06-25 13:31 ` Ulf Carlsson
1999-06-25 18:08 ` Thomas Bogendoerfer
1999-06-25 14:34 ` Andrew Linfoot
1999-06-25 14:34 ` Andrew Linfoot
1999-06-25 16:59 ` Ulf Carlsson
1999-06-25 17:11 ` Andrew Linfoot
1999-06-25 17:11 ` Andrew Linfoot
1999-06-28 10:39 ` Ralf Baechle
1999-06-28 9:34 ` Ralf Baechle
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox