From: "Roman Mashak" <mrv@tusur.ru>
To: <linux-mips@linux-mips.org>
Subject: YAMON compiling
Date: Wed, 21 Jul 2004 13:37:52 +0900 [thread overview]
Message-ID: <002601c46edc$809fe700$cc20bdd3@roman> (raw)
Hello!
After installing SDE toolkit onto Linux box I tried to compile the
YAMON bootloader source code (version of YAMON is 2.00). Few errors arised:
../arch/include/mips.h: Assembler messages:
../arch/include/mips.h:397: Warning: rest of line ignored; first ignored
character is `/'
../arch/include/mips.h:398: Warning: rest of line ignored; first ignored
character is `/'
../arch/include/mips.h:399: Warning: rest of line ignored; first ignored
character is `/'
../arch/include/pb1000.h:1: Warning: rest of line ignored; first ignored
character is `/'
../arch/include/pb1000.h:3: Warning: rest of line ignored; first ignored
character is `/'
../arch/include/pb1000.h:406: Warning: rest of line ignored; first ignored
character is `/'
./../init/reset/reset.S:98: Warning: rest of line ignored; first ignored
character is `/'
./../init/reset/reset.S:99: Warning: rest of line ignored; first ignored
character is `/'
../arch/init/reset_db1550.S:641: Warning: rest of line ignored; first
ignored character is `/'
../arch/init/reset_db1550.S:739: Error: absolute expression required `li'
../arch/init/reset_db1550.S:783: Error: absolute expression required `li'
../arch/init/reset_db1550.S:821: Error: absolute expression required `li'
make: *** [reset.o] Error1
The lines in mips.h that arise these warnings are the following:
// #define AU1000 0x00030100
//#define AU1000 0x01030200
//#define AU1000_2_1 0x00030200
It seems it doesn't understand the comment syntax.
I have installed the version 5.03.06-LITE of SDE. Following is the code
extract around which error occures:
#define t1 $9
#define mem_sdconfiga 0x0840
#define MEM_SDCONFIGA_DDR 0x9030060A
#define MEM_SDREFCFG_D_DDR MEM_SDCONFIGA_DDR
li t1, MEM_SDREFCFG_D_DDR
sw t1, mem_sdconfiga(t0)
sync
Compiler thinks 'li t1, MEM_SDREFCFG_D_DDR' is 'bad expression', may be
it guesses MEM_SDREFCFG_D_DDR is not defined correctly?
Thank you for every help in advance!
With best regards, Roman Mashak. E-mail: mrv@tusur.ru
WARNING: multiple messages have this Message-ID (diff)
From: "Roman Mashak" <mrv@tusur.ru>
To: linux-mips@linux-mips.org
Subject: YAMON compiling
Date: Wed, 21 Jul 2004 13:37:52 +0900 [thread overview]
Message-ID: <002601c46edc$809fe700$cc20bdd3@roman> (raw)
Message-ID: <20040721043752.iUjYCeNTbWK13XoXFGvBO0PFFrbpx-RJRzC1zfWEQe8@z> (raw)
Hello!
After installing SDE toolkit onto Linux box I tried to compile the
YAMON bootloader source code (version of YAMON is 2.00). Few errors arised:
../arch/include/mips.h: Assembler messages:
../arch/include/mips.h:397: Warning: rest of line ignored; first ignored
character is `/'
../arch/include/mips.h:398: Warning: rest of line ignored; first ignored
character is `/'
../arch/include/mips.h:399: Warning: rest of line ignored; first ignored
character is `/'
../arch/include/pb1000.h:1: Warning: rest of line ignored; first ignored
character is `/'
../arch/include/pb1000.h:3: Warning: rest of line ignored; first ignored
character is `/'
../arch/include/pb1000.h:406: Warning: rest of line ignored; first ignored
character is `/'
./../init/reset/reset.S:98: Warning: rest of line ignored; first ignored
character is `/'
./../init/reset/reset.S:99: Warning: rest of line ignored; first ignored
character is `/'
../arch/init/reset_db1550.S:641: Warning: rest of line ignored; first
ignored character is `/'
../arch/init/reset_db1550.S:739: Error: absolute expression required `li'
../arch/init/reset_db1550.S:783: Error: absolute expression required `li'
../arch/init/reset_db1550.S:821: Error: absolute expression required `li'
make: *** [reset.o] Error1
The lines in mips.h that arise these warnings are the following:
// #define AU1000 0x00030100
//#define AU1000 0x01030200
//#define AU1000_2_1 0x00030200
It seems it doesn't understand the comment syntax.
I have installed the version 5.03.06-LITE of SDE. Following is the code
extract around which error occures:
#define t1 $9
#define mem_sdconfiga 0x0840
#define MEM_SDCONFIGA_DDR 0x9030060A
#define MEM_SDREFCFG_D_DDR MEM_SDCONFIGA_DDR
li t1, MEM_SDREFCFG_D_DDR
sw t1, mem_sdconfiga(t0)
sync
Compiler thinks 'li t1, MEM_SDREFCFG_D_DDR' is 'bad expression', may be
it guesses MEM_SDREFCFG_D_DDR is not defined correctly?
Thank you for every help in advance!
With best regards, Roman Mashak. E-mail: mrv@tusur.ru
next reply other threads:[~2004-07-21 4:38 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-07-21 4:37 Roman Mashak [this message]
2004-07-21 4:37 ` YAMON compiling Roman Mashak
2004-07-21 10:52 ` Chris Dearman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='002601c46edc$809fe700$cc20bdd3@roman' \
--to=mrv@tusur.ru \
--cc=linux-mips@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox