* Re: Linux and the Sony Playstation @ 2002-06-19 7:17 Hartvig Ekner 2002-06-19 7:17 ` Hartvig Ekner 2002-06-19 9:39 ` Kevin D. Kissell 0 siblings, 2 replies; 6+ messages in thread From: Hartvig Ekner @ 2002-06-19 7:17 UTC (permalink / raw) To: user alias Forwarded message: > From: "Kevin D. Kissell" <kevink@mips.com> > To: <linux-mips@fnet.fr>, <linux-mips@oss.sgi.com> > Subject: Linux and the Sony Playstation 2 > Date: Tue, 18 Jun 2002 15:59:57 +0200 > > The Sony PS2 Linux kit has been shipping for nearly > a month now, and I'm frankly astonished at how little > I've seen on this mailing list about it. For better or > for worse, this changes everything for MIPS/Linux. > The number of MIPS/Linux users worldwide has > just gone up by at least an order of magnitude, > and they are on a platform running a 2.2.1-derived > kernel and using gcc 2.95.2. > > It's a perfectly usable platform out of the box, but > Carsten has thrown "crashme" at it, and it goes down > relatively quickly. People trying to port kaffe and > other programs that do double-precision float are > blocked because there's no double precision on the > R5900, and the Sony kernel lacks the Algorithmics > emulator. The few simple double-precision programs (ala hello world) I ran worked, and the compiler substitutes integer code (softfloat) for any double precision operation. What are the things known not to work? > It's not clear what Sony is going to put into further > development, and what they are going to expect the > user community to take over from here. There is a > group of people trying to take the kernel up to > 2.2.20, but I'm not yet sure whether they know > what they are doing, and anyway, that box needs > to get to 2.4.x ASAP. It would be great to get 2.4.x on PS/2, and if one doesn't run into glibc/kernel dependencies in the upgrade, it should be a reasonable amount of work. The biggest benefit I see is that a 2.4.x upgrade with the emulator would allow binary portability of userland using double prec floats. But one thing which I really admire on the Sony release is the thoroughness and completeness of their offering. The kernel has full support for the additional T5900 SIMD state, all new instructions and state is supported fully in toolchain: binutils, gdb, you name it. Everything in the kit works (at least what I have tested). Getting the kernel upgraded would be nice, but there is probably even more work getting the toolchain, glibc and userland up to speed. There are about 600 binary userland RPMs provided, which is also a ton of work to keep updated. One needs to be very careful that the individual "upgrade" pieces people do doesn't break the overall nice picture of "everything works out of the box". What is really needed is that somebody puts together a productized PS/2 Linux kit version 2.0, which has the kernel/glibc/toolchain/userland RPMs upgraded to recent versions. If somebody else volunteers for the rest, I'll do the kernel :-) (One of us here here might do it anyway). /Hartvig -- _ _ _____ ____ Hartvig Ekner Mailto:hartvige@mips.com |\ /| | |____)(____ Direct: +45 4486 5503 | \/ | | | _____) MIPS Denmark Switch: +45 4486 5555 T E C H N O L O G I E S http://www.mips.com Fax...: +45 4486 5556 ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Linux and the Sony Playstation 2002-06-19 7:17 Linux and the Sony Playstation Hartvig Ekner @ 2002-06-19 7:17 ` Hartvig Ekner 2002-06-19 9:39 ` Kevin D. Kissell 1 sibling, 0 replies; 6+ messages in thread From: Hartvig Ekner @ 2002-06-19 7:17 UTC (permalink / raw) To: user alias Forwarded message: > From: "Kevin D. Kissell" <kevink@mips.com> > To: <linux-mips@fnet.fr>, <linux-mips@oss.sgi.com> > Subject: Linux and the Sony Playstation 2 > Date: Tue, 18 Jun 2002 15:59:57 +0200 > > The Sony PS2 Linux kit has been shipping for nearly > a month now, and I'm frankly astonished at how little > I've seen on this mailing list about it. For better or > for worse, this changes everything for MIPS/Linux. > The number of MIPS/Linux users worldwide has > just gone up by at least an order of magnitude, > and they are on a platform running a 2.2.1-derived > kernel and using gcc 2.95.2. > > It's a perfectly usable platform out of the box, but > Carsten has thrown "crashme" at it, and it goes down > relatively quickly. People trying to port kaffe and > other programs that do double-precision float are > blocked because there's no double precision on the > R5900, and the Sony kernel lacks the Algorithmics > emulator. The few simple double-precision programs (ala hello world) I ran worked, and the compiler substitutes integer code (softfloat) for any double precision operation. What are the things known not to work? > It's not clear what Sony is going to put into further > development, and what they are going to expect the > user community to take over from here. There is a > group of people trying to take the kernel up to > 2.2.20, but I'm not yet sure whether they know > what they are doing, and anyway, that box needs > to get to 2.4.x ASAP. It would be great to get 2.4.x on PS/2, and if one doesn't run into glibc/kernel dependencies in the upgrade, it should be a reasonable amount of work. The biggest benefit I see is that a 2.4.x upgrade with the emulator would allow binary portability of userland using double prec floats. But one thing which I really admire on the Sony release is the thoroughness and completeness of their offering. The kernel has full support for the additional T5900 SIMD state, all new instructions and state is supported fully in toolchain: binutils, gdb, you name it. Everything in the kit works (at least what I have tested). Getting the kernel upgraded would be nice, but there is probably even more work getting the toolchain, glibc and userland up to speed. There are about 600 binary userland RPMs provided, which is also a ton of work to keep updated. One needs to be very careful that the individual "upgrade" pieces people do doesn't break the overall nice picture of "everything works out of the box". What is really needed is that somebody puts together a productized PS/2 Linux kit version 2.0, which has the kernel/glibc/toolchain/userland RPMs upgraded to recent versions. If somebody else volunteers for the rest, I'll do the kernel :-) (One of us here here might do it anyway). /Hartvig -- _ _ _____ ____ Hartvig Ekner Mailto:hartvige@mips.com |\ /| | |____)(____ Direct: +45 4486 5503 | \/ | | | _____) MIPS Denmark Switch: +45 4486 5555 T E C H N O L O G I E S http://www.mips.com Fax...: +45 4486 5556 ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Linux and the Sony Playstation 2002-06-19 7:17 Linux and the Sony Playstation Hartvig Ekner 2002-06-19 7:17 ` Hartvig Ekner @ 2002-06-19 9:39 ` Kevin D. Kissell 2002-06-19 9:51 ` Hartvig Ekner 1 sibling, 1 reply; 6+ messages in thread From: Kevin D. Kissell @ 2002-06-19 9:39 UTC (permalink / raw) To: Hartvig Ekner, user alias From: "Hartvig Ekner" <hartvige@mips.com> To: "user alias" <linux-mips@oss.sgi.com> > > From: "Kevin D. Kissell" <kevink@mips.com> > > To: <linux-mips@fnet.fr>, <linux-mips@oss.sgi.com> > > Subject: Linux and the Sony Playstation 2 > > Date: Tue, 18 Jun 2002 15:59:57 +0200 > > > > The Sony PS2 Linux kit has been shipping for nearly > > a month now, and I'm frankly astonished at how little > > I've seen on this mailing list about it. For better or > > for worse, this changes everything for MIPS/Linux. > > The number of MIPS/Linux users worldwide has > > just gone up by at least an order of magnitude, > > and they are on a platform running a 2.2.1-derived > > kernel and using gcc 2.95.2. > > > > It's a perfectly usable platform out of the box, but > > Carsten has thrown "crashme" at it, and it goes down > > relatively quickly. People trying to port kaffe and > > other programs that do double-precision float are > > blocked because there's no double precision on the > > R5900, and the Sony kernel lacks the Algorithmics > > emulator. > > The few simple double-precision programs (ala hello world) I ran worked, > and the compiler substitutes integer code (softfloat) for any double > precision operation. What are the things known not to work? You didn't disassemble the code. The Sony gcc distribution is hard-wired to generate soft-float code, even if you specify -mhard-float on the command line. Since most embedded/multimedia FP is single precision, one could imagine why Sony and Toshiba could have decided to leave out floating doubles. The real problem is the accursed C stipulation that all FP arguments be promoted to doubles. Having every damned passed argument converted by the kernel would be a bit of a hit, but I would expect that, in any (single precision) floating point computation intensive application, that would be more than made up for by the time gained in executing the loops native. And, as always, we have the correctness issue. We need to get the PS2 to 2.4.x (and 2.5) fairly quickly, and we want to be able to have interoperability of MIPS32 binaries across PS2 and non-PS2 platforms, including those who habitually use their FPUs. I've started hacking the current (2.4.18+) MIPS/Algorithmics emulator code into the Sony 2.2.1 kernel as a stopgap, but it's a little tricky to test, given that the Sony tools go out of their way to stop me generating any real FP instructions. Regards, Kevin K. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Linux and the Sony Playstation 2002-06-19 9:39 ` Kevin D. Kissell @ 2002-06-19 9:51 ` Hartvig Ekner 2002-06-19 9:51 ` Hartvig Ekner 2002-06-19 10:15 ` Kevin D. Kissell 0 siblings, 2 replies; 6+ messages in thread From: Hartvig Ekner @ 2002-06-19 9:51 UTC (permalink / raw) To: Kevin D. Kissell; +Cc: Hartvig Ekner, user alias Kevin D. Kissell writes: > > From: "Hartvig Ekner" <hartvige@mips.com> > To: "user alias" <linux-mips@oss.sgi.com> > > > From: "Kevin D. Kissell" <kevink@mips.com> > > > To: <linux-mips@fnet.fr>, <linux-mips@oss.sgi.com> > > > Subject: Linux and the Sony Playstation 2 > > > Date: Tue, 18 Jun 2002 15:59:57 +0200 > > > > > > The Sony PS2 Linux kit has been shipping for nearly > > > a month now, and I'm frankly astonished at how little > > > I've seen on this mailing list about it. For better or > > > for worse, this changes everything for MIPS/Linux. > > > The number of MIPS/Linux users worldwide has > > > just gone up by at least an order of magnitude, > > > and they are on a platform running a 2.2.1-derived > > > kernel and using gcc 2.95.2. > > > > > > It's a perfectly usable platform out of the box, but > > > Carsten has thrown "crashme" at it, and it goes down > > > relatively quickly. People trying to port kaffe and > > > other programs that do double-precision float are > > > blocked because there's no double precision on the > > > R5900, and the Sony kernel lacks the Algorithmics > > > emulator. > > > > The few simple double-precision programs (ala hello world) I ran worked, > > and the compiler substitutes integer code (softfloat) for any double > > precision operation. What are the things known not to work? > > You didn't disassemble the code. The Sony gcc distribution > is hard-wired to generate soft-float code, even if you > specify -mhard-float on the command line. I did disassemble the code. It generates true FPU code for floats, and soft-float for double. See the example below: [hartvige@copps01 test]$ more hellof.c int main() { float a,b; a = 3.0f; b = a + 2.0f; printf("hello world %f\n",b); } gcc hellof.c, and disassembling: 0000000000400a70 <main>: 400a70: 3c1c0fc0 lui $gp,0xfc0 400a74: 279c75c0 addiu $gp,$gp,30144 400a78: 0399e021 addu $gp,$gp,$t9 400a7c: 27bdffc0 addiu $sp,$sp,-64 400a80: afbc0010 sw $gp,16($sp) 400a84: afbf0038 sw $ra,56($sp) 400a88: afbe0034 sw $s8,52($sp) 400a8c: afbc0030 sw $gp,48($sp) 400a90: 03a0f021 move $s8,$sp 400a94: 3c014040 lui $at,0x4040 400a98: 44810000 mtc1 $at,$f0 400a9c: 00000000 nop 400aa0: e7c00020 swc1 $f0,32($s8) 400aa4: c7c00020 lwc1 $f0,32($s8) 400aa8: 3c014000 lui $at,0x4000 400aac: 44810800 mtc1 $at,$f1 400ab0: 00000000 nop 400ab4: 46010000 add.s $f0,$f0,$f1 400ab8: e7c00024 swc1 $f0,36($s8) 400abc: c7cc0024 lwc1 $f12,36($s8) 400ac0: 8f998054 lw $t9,-32684($gp) 400ac4: 0320f809 jalr $t9 400ac8: 00000000 nop 400acc: 8fdc0010 lw $gp,16($s8) 400ad0: 8f848018 lw $a0,-32744($gp) 400ad4: 24841040 addiu $a0,$a0,4160 400ad8: 00403021 move $a2,$v0 400adc: 00603821 move $a3,$v1 400ae0: 8f998064 lw $t9,-32668($gp) 400ae4: 0320f809 jalr $t9 400ae8: 00000000 nop 400aec: 8fdc0010 lw $gp,16($s8) 400af0: 03c0e821 move $sp,$s8 Were you talking about double-precision only, or is there something different in the kits? /Hartvig ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Linux and the Sony Playstation 2002-06-19 9:51 ` Hartvig Ekner @ 2002-06-19 9:51 ` Hartvig Ekner 2002-06-19 10:15 ` Kevin D. Kissell 1 sibling, 0 replies; 6+ messages in thread From: Hartvig Ekner @ 2002-06-19 9:51 UTC (permalink / raw) To: Kevin D. Kissell; +Cc: Hartvig Ekner, user alias Kevin D. Kissell writes: > > From: "Hartvig Ekner" <hartvige@mips.com> > To: "user alias" <linux-mips@oss.sgi.com> > > > From: "Kevin D. Kissell" <kevink@mips.com> > > > To: <linux-mips@fnet.fr>, <linux-mips@oss.sgi.com> > > > Subject: Linux and the Sony Playstation 2 > > > Date: Tue, 18 Jun 2002 15:59:57 +0200 > > > > > > The Sony PS2 Linux kit has been shipping for nearly > > > a month now, and I'm frankly astonished at how little > > > I've seen on this mailing list about it. For better or > > > for worse, this changes everything for MIPS/Linux. > > > The number of MIPS/Linux users worldwide has > > > just gone up by at least an order of magnitude, > > > and they are on a platform running a 2.2.1-derived > > > kernel and using gcc 2.95.2. > > > > > > It's a perfectly usable platform out of the box, but > > > Carsten has thrown "crashme" at it, and it goes down > > > relatively quickly. People trying to port kaffe and > > > other programs that do double-precision float are > > > blocked because there's no double precision on the > > > R5900, and the Sony kernel lacks the Algorithmics > > > emulator. > > > > The few simple double-precision programs (ala hello world) I ran worked, > > and the compiler substitutes integer code (softfloat) for any double > > precision operation. What are the things known not to work? > > You didn't disassemble the code. The Sony gcc distribution > is hard-wired to generate soft-float code, even if you > specify -mhard-float on the command line. I did disassemble the code. It generates true FPU code for floats, and soft-float for double. See the example below: [hartvige@copps01 test]$ more hellof.c int main() { float a,b; a = 3.0f; b = a + 2.0f; printf("hello world %f\n",b); } gcc hellof.c, and disassembling: 0000000000400a70 <main>: 400a70: 3c1c0fc0 lui $gp,0xfc0 400a74: 279c75c0 addiu $gp,$gp,30144 400a78: 0399e021 addu $gp,$gp,$t9 400a7c: 27bdffc0 addiu $sp,$sp,-64 400a80: afbc0010 sw $gp,16($sp) 400a84: afbf0038 sw $ra,56($sp) 400a88: afbe0034 sw $s8,52($sp) 400a8c: afbc0030 sw $gp,48($sp) 400a90: 03a0f021 move $s8,$sp 400a94: 3c014040 lui $at,0x4040 400a98: 44810000 mtc1 $at,$f0 400a9c: 00000000 nop 400aa0: e7c00020 swc1 $f0,32($s8) 400aa4: c7c00020 lwc1 $f0,32($s8) 400aa8: 3c014000 lui $at,0x4000 400aac: 44810800 mtc1 $at,$f1 400ab0: 00000000 nop 400ab4: 46010000 add.s $f0,$f0,$f1 400ab8: e7c00024 swc1 $f0,36($s8) 400abc: c7cc0024 lwc1 $f12,36($s8) 400ac0: 8f998054 lw $t9,-32684($gp) 400ac4: 0320f809 jalr $t9 400ac8: 00000000 nop 400acc: 8fdc0010 lw $gp,16($s8) 400ad0: 8f848018 lw $a0,-32744($gp) 400ad4: 24841040 addiu $a0,$a0,4160 400ad8: 00403021 move $a2,$v0 400adc: 00603821 move $a3,$v1 400ae0: 8f998064 lw $t9,-32668($gp) 400ae4: 0320f809 jalr $t9 400ae8: 00000000 nop 400aec: 8fdc0010 lw $gp,16($s8) 400af0: 03c0e821 move $sp,$s8 Were you talking about double-precision only, or is there something different in the kits? /Hartvig ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Linux and the Sony Playstation 2002-06-19 9:51 ` Hartvig Ekner 2002-06-19 9:51 ` Hartvig Ekner @ 2002-06-19 10:15 ` Kevin D. Kissell 1 sibling, 0 replies; 6+ messages in thread From: Kevin D. Kissell @ 2002-06-19 10:15 UTC (permalink / raw) To: Hartvig Ekner; +Cc: user alias > > You didn't disassemble the code. The Sony gcc distribution > > is hard-wired to generate soft-float code, even if you > > specify -mhard-float on the command line. > > I did disassemble the code. It generates true FPU code for floats, and > soft-float for double. See the example below: I tested both double and single variants last night, and I *thought* that I had seen soft-float code generated for both cases. By the light of day, I can see that that the single case disassembly does indeed use the FPU - I must have gotten the disassembly files confused last night. In any case, as I said, even if you specify "hard-float", you'll get soft doubles from the Sony gcc. While various users have complained about both the speed and the accuracy of the Sony soft float implementation, it does pass paranoia with flying colors. Kevin K. ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2002-06-19 10:12 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2002-06-19 7:17 Linux and the Sony Playstation Hartvig Ekner 2002-06-19 7:17 ` Hartvig Ekner 2002-06-19 9:39 ` Kevin D. Kissell 2002-06-19 9:51 ` Hartvig Ekner 2002-06-19 9:51 ` Hartvig Ekner 2002-06-19 10:15 ` Kevin D. Kissell
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox