From: "Bogdan Vacaliuc" <bvacaliuc@ngit.com>
To: <ppopov@embeddedalley.com>, "'Ruslan V.Pisarev'" <jerry@izmiran.rssi.ru>
Cc: <linux-mips@linux-mips.org>
Subject: RE: dbau1200 ethernet driver?
Date: Sat, 7 May 2005 09:08:36 -0400 [thread overview]
Message-ID: <00c801c55305$e3de3660$0b03a8c0@lithium> (raw)
In-Reply-To: <1115394400.5785.3.camel@localhost.localdomain>
On Friday, May 06, 2005 11:47 AM, Pete Popov wrote:
> On Fri, 2005-05-06 at 15:53 +0300, Ruslan V.Pisarev wrote:
>> Hi!
>>
>> I compiled last 2.6 kernel (2-3 weeks ago from cvs@linux-mips) and
>> trying to start it on DBAu1200 development board. First problem I
>> discovered with "nfsroot" configuration - is that kernel cannot find
>> network interface at boot-time. There is a smc91c111 network chip on
>> board, so my question is - what driver is suitable with him?
>
> The smc91x.c driver. However, I don't remember if that driver was
> tested. The board was tested with a different smc driver which I
> couldn't push in the tree because it was old and would conflict with
> the smc91x.c.
>
>> Is it "MIPS AU1000 Ethernet support"
>> which fails to compile with "error: `NUM_ETH_INTERFACES' undeclared"
>> (and it must be?) or something different? It seems that I have
>> enabled all other options for ethernet functionality.
>
> Well, that's a different driver.
Yes, and not for Au1200. The Au1200 does not have an integrated MAC; access to the MAC/PHY is through the static memory controller.
-bogdan
WARNING: multiple messages have this Message-ID (diff)
From: "Bogdan Vacaliuc" <bvacaliuc@ngit.com>
To: ppopov@embeddedalley.com, "'Ruslan V.Pisarev'" <jerry@izmiran.rssi.ru>
Cc: linux-mips@linux-mips.org
Subject: RE: dbau1200 ethernet driver?
Date: Sat, 7 May 2005 09:08:36 -0400 [thread overview]
Message-ID: <00c801c55305$e3de3660$0b03a8c0@lithium> (raw)
Message-ID: <20050507130836.YW9qjveaJPfXiVzY2vDoeWjx1M8b2JeN1x9yU6U0JIw@z> (raw)
In-Reply-To: <1115394400.5785.3.camel@localhost.localdomain>
On Friday, May 06, 2005 11:47 AM, Pete Popov wrote:
> On Fri, 2005-05-06 at 15:53 +0300, Ruslan V.Pisarev wrote:
>> Hi!
>>
>> I compiled last 2.6 kernel (2-3 weeks ago from cvs@linux-mips) and
>> trying to start it on DBAu1200 development board. First problem I
>> discovered with "nfsroot" configuration - is that kernel cannot find
>> network interface at boot-time. There is a smc91c111 network chip on
>> board, so my question is - what driver is suitable with him?
>
> The smc91x.c driver. However, I don't remember if that driver was
> tested. The board was tested with a different smc driver which I
> couldn't push in the tree because it was old and would conflict with
> the smc91x.c.
>
>> Is it "MIPS AU1000 Ethernet support"
>> which fails to compile with "error: `NUM_ETH_INTERFACES' undeclared"
>> (and it must be?) or something different? It seems that I have
>> enabled all other options for ethernet functionality.
>
> Well, that's a different driver.
Yes, and not for Au1200. The Au1200 does not have an integrated MAC; access to the MAC/PHY is through the static memory controller.
-bogdan
next prev parent reply other threads:[~2005-05-07 13:09 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-06 12:53 dbau1200 ethernet driver? Ruslan V.Pisarev
2005-05-06 13:32 ` sjhill
2005-05-06 14:12 ` Re[2]: " Ruslan V.Pisarev
2005-05-06 16:17 ` Pete Popov
2005-05-06 15:46 ` Pete Popov
2005-05-06 16:19 ` Re[2]: " Ruslan V.Pisarev
2005-05-07 13:08 ` Bogdan Vacaliuc [this message]
2005-05-07 13:08 ` Bogdan Vacaliuc
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='00c801c55305$e3de3660$0b03a8c0@lithium' \
--to=bvacaliuc@ngit.com \
--cc=jerry@izmiran.rssi.ru \
--cc=linux-mips@linux-mips.org \
--cc=ppopov@embeddedalley.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox