* RE: How disable CONFIG_PCI
@ 2003-09-18 10:12 Liu Hongming (Alan)
0 siblings, 0 replies; 2+ messages in thread
From: Liu Hongming (Alan) @ 2003-09-18 10:12 UTC (permalink / raw)
To: prabhakark, 'linux-mips@linux-mips.org'
[-- Attachment #1: Type: text/plain, Size: 690 bytes --]
Hi,
In arch/mips/config.in, find the specific line relating to your CSB250(what
is it???):
define_bool CONFIG_PCI y
just delete it.
Alan
-----Original Message-----
From: Prabhakar Kalasani [mailto:prabhakark@contechsoftware.com]
Sent: Thursday, September 18, 2003 11:47 PM
To: 'linux-mips@linux-mips.org'
Subject: How disable CONFIG_PCI
Hi all,
I'm compiling Linux-2.4.21 kernel for CSB250 board downloaded from
mips-linux,
I've configured CONFIG_PCI n , but when i go for xconfig, the value to
CONFIG_PCI y
where it's getting over write ?
Because of CONFIG_PCI y, I'm unable to get my Framebuffer device active
How to solve this problem...
Thanks in advence
Prabhakar Kalasani
[-- Attachment #2: Type: text/html, Size: 1544 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
* How disable CONFIG_PCI
@ 2003-09-18 15:46 Prabhakar Kalasani
0 siblings, 0 replies; 2+ messages in thread
From: Prabhakar Kalasani @ 2003-09-18 15:46 UTC (permalink / raw)
To: 'linux-mips@linux-mips.org'
Hi all,
I'm compiling Linux-2.4.21 kernel for CSB250 board downloaded from mips-linux,
I've configured CONFIG_PCI n , but when i go for xconfig, the value to CONFIG_PCI y
where it's getting over write ?
Because of CONFIG_PCI y, I'm unable to get my Framebuffer device active
How to solve this problem...
Thanks in advence
Prabhakar Kalasani
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-09-18 10:16 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-09-18 15:46 How disable CONFIG_PCI Prabhakar Kalasani
-- strict thread matches above, loose matches on Subject: below --
2003-09-18 10:12 Liu Hongming (Alan)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox